Construction of New Panchayat Office Building at Ulagampattu Panchayat of Thiruvannamalai District under AGAMT 2022-23

Amount

Construction of Panchayat Office Building at Ulagampattu Panchayat

Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete.,For Foundation

Supplying and filling with filling sand in layers not more than 15 cm thick ,well rammed, wattered and compacted etc,complete For Foundation

Filling in Basment with Excavation earth in Laying of not more than 15cm thik well rammed watered and consolidated complying with standard specification etc

Plain Cement Concrete 1:4:8 mix using 40mm ISS HBG metal Including cost and conveyance of all materials and all labour charges etc

Brick work with cement mortar 1:5 mix using II class bricks for foundation and basement and superstructure inculding cost and conveyance of all materiales curing etc ,complete.Upto Basement

Upto Basement

Above Basement

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,

Upto Basement

Above Basement

Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc.

Reinforced cement concrete 1:11/2:3 mix using 20 mmHBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc complete.,

Up to Basment

Above Basement

Paving the Floring with Vetrified tiles in C:M 1:3 20mm Thick

Dadoing the walls with new Glazed tiles of size 150 x150 x6 mm laid in CM 1:2 ,10 mm thick and pointig with white cement using 0.40 Kg/m2 including finishing the joint and pointing flush with ties surface

Brick jally lime concrete using 20mm brick jelly with slaked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labur charges for mixing laying and finishing etc completed for 10cum

Terrace flooring with one coarce of old &new machine pressed tiles of size 20x20x2 mmusing Cm 1:3 with water proofing compound 2% weight of cement used and the joints pointed with same

Paving the flooring with special type of flooring tiles ( cement based hydraulically pressed anti skid tiled (20mm thick) in CM 1:3, 20mm thick

finishing the exposed surface of RCC item of work Such as Slabs beam sunshade facia canopy slab staircase waist slab,landing ect,with CM1:3 ,10mm Thick including raking the surface the rate is to include the cost of providing cement morter bending or nosing for sunshades staircase steps,landing slabs etc., complete complaying with standard specification

Plastering with Cement Morter 1:5 mix 12 mm thick over the cement concrete for floor finish including curing ect., complete complying with standard specification and as directed by the departmental offcers rate for 10m

Colour Washing with Best Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Cement Concrete 1:2:3 mix using 20mm ISS Metal Including cost and Conveyance

Painting two coats with approved Plastic Emulsion paint over one coat of Primaring coat over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete complying with standard specifications and as directed by the departmental officers. (S.I No. 359 B)

Painting two coat of new iron works such as steel Doors,windows,ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats,ete.

Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete. Door1.10 x 2.10 m

Fabrication and supply of mild steel Window of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

fixing of steel rolling shutters including cost and conveyence to work site and labur charges etc. complete.

Fabricated and supply of steel grill gate of over all size 1500X2100 mm using structure steel etc.,completed in all respects as directed (details specification enclosed as annexure)

solid PVC Door shutter using 19 guage 13mm MS sq tubes for styies and outer frames 15mm MS sq tubes for top lock and bottom rails the steel tubes shill be covered with 5mm thick solid PVC sheets Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position include nessary funture and fitting the over all size of styles shall be 50mmX30mm the over all soze of top rail lock rail and bottom rail shall be 75mmX30mm the over all size of frames shall be 50mmX45mm with suitsble suitable rabate for housing the shutter

Manufactring supplaying and fixing of stainless steel hand rails for near wet raiser using 50mm dia 304L grade stainless steel pipe of 1.60mm thick will be provided with turblr supprt made of 304L grade stainless steel pipe of 25mm dia of 1.60mm thick welding to therailing the rate included for grouting into concrete with necessary supporting arrangement the hand railin floor polishin buffing cutting grinding conveyance and welding charges electrical charges etc completed

Supplay and Fixing of Indion Water Closet

Supplay and Fixing of Westen Water Closet

Supplay and Fixing of Rain water PVC Pipe

Labur Charges for Fixing of Steel Door

Labur Charges for Fixing of Steel Window

Wash Basion

Providing for electrical arrangement Sbu estimate

Providing C.F.L / LED / Tube light / Fan Point with all accessories etc. complete

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points Per Coil) Concealed (SD 25) Light Point / Fan Point (SD 25)

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points Per Coil) Concealed (SD 25) Plug Point

Providing Light Fitting with accessories etc. complete

Supply and fixing of fancy glass shade and 11W CFL for BH point. (SD 80) CFL Light Fitting (SD80)

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. Tube Light (SD 88)

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL Bulk head fitting (SD83)

Providing Fan Fitting with accessories etc. complete

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp. SD(110) Fan Fitting SD(110)

Supply and fixing of 16 Amps DP Switch of 500 V with matal clad with fuse and neutral (Side Handle) on suitable TW Board with earth connection only. SD(142) DPTC switch SD(142)

Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains. SD(64) Service wire (SD64)

Supply and run of 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains. (SD69) Service GI pipe (Class 'B') (SD69)

Supply and fixing of 15 A aerial fuse unit(500A) on suitable 100x100 mm TW concealed box with hylem sheet on on the tapping pole with necessary clamps. (SD128) 15A Fuse unit (SD128)

EB Deposite

Provision for Tank,PVC&GI Pipes and Specials for Water Supply and Sanitary arrangement

Towards conducting Geophysical Suvey Charges

Drilling in 180mm dia Bore well including cost and conveyance in Loose Soil etc., complete

Drilling in 165mm dia Bore well including cost and conveyance in Hard ,Gravel Soil etc., complete

Cost and supply of 165mm PVC Casing pipe includung cost and conveyance etc., complete

Cost and supply, Delivery of 5HP Submersible motor with pannel board, PVC pipes ,GI pipes and specials etc., complete

Earthwork excavation and depositing on bank with initial lead and lift in hard stiff clay soil and hard gravel soil as per standard specification SS 20 B for narrow foundation

Towards Purcheing of 63mm 6ksc Pipes ect., completed

Refilling with excavated soil complying with standard Specification in layers of 15cm thick well rammed and consolidated after the Pipes and specials are laid and tested

Towerds labour charges for fixing of pipe line

Labour charges for errecting of Pumpset and specials

Provision sanitary arrangement

Provision for Rain Water Harvesting Structure

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Kalaivani Construction