CPPP

Financial BO

Works

Electrical Works

M/o Scheme under Nazul A/c-II, Rohini.

Delhi Development Authority

Rohini | North West Delhi, Delhi

Amount: ₹23.8 LCloses: 6 May 2026Closed

Timeline

Published27 Apr 2026
Closed6 May 2026
Technical Evaluation4 Jun 2026
Financial Evaluation8 Jun 2026
Award—

Bids

Percentage

4 Bids8 Jun 2026

#	Company	Quoted %	Amount	Rank	Status
1	NKENGGWORKS L1₹15.7 LAdmitted-Finance G 15 PKT 2 NARAINA VIHAR NEW DELHI 110028 \| NEW DELHI \| DELHI \| 110028	-33.99%	₹15.7 L	L1	Admitted-Finance
2	continental electricals L2₹16.9 L+₹1.2 L (7.74%)Admitted-Finance	-28.88%	₹16.9 L+₹1.2 L (7.74%)	L2	Admitted-Finance
3	PUMPS ENGINEERING AND ASSOCIATES Rejected-Technical B 1124 SHASTRI NAGAR DELHI 110052 \| NORTH \| DELHI \| 110052	-	-	-	Rejected-Technical DISQUALIFIED
4	SATKAR ELECTRICALS Rejected-Technical	-	-	-	Rejected-Technical DISQUALIFIED

Tender Value

₹23.8 L

EMD Value

₹47,589

Closing Date

6 May 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

EE,ELD-9,DDA

Address

EE,ELD-9,DDA

Work Description

Operation and Maintenance of Clear water Booster pump set, DG set and Substation equipment at Block- A and C, Sector-28, Rohini, Ph-IV

Tender Information

Tender ID

2026_DDA_906552_1

Reference Number

04/EE/ELD-9/DDA/NIT/ 2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Works

Period of Work

365 days

Location

Rohini

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

14 documents required · 14 mandatory

Fee/PreQual/Technical

Requiredi) The Unique Transaction Reference of RTGS/ NEFT against EMD. (.pdf)

Requiredii) Scanned Copy of Proof of Payment made for Processing Fee Charges as detailed in Para No.- 6 abov (.pdf)

Requirediii) Certificate of Registration for/ under GST Act and acknowledgement of up to last financial year (.pdf)

Requirediv) Net worth Certificate (on the Format prescribed in Form B-1). (.pdf)

Requiredv) Scanned Copy of Tender Acceptance Letter as per attached Format. (.pdf)

Requiredvi) Corrigendum to Tender uploaded before opening of Tender (if any). (.pdf)

Requiredvii) Certificates of Work Experience. (.pdf)

Requiredviii) Financial Information in Form A. (.pdf)

Requiredix) Affidavit as per provisions of Clause-1.3 of Form-6 (NIT) should mention the NIT No. andattested (.pdf)

Requiredx) Electrical License. (.pdf)

Requiredxi) ESIC and EPF registration copy. (Note An undertaking on 50/- non-judicial stamp paper in case (.pdf)

Requiredxii) An undertaking on Rs.100- non-judicial stamp paperduly notarized under Article-4 affidavit ment (.pdf)

Requiredxiii) Any other Documents as specified in the Press Notice. (.pdf)

Finance

RequiredPrice Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹47,589

Pre-Bid Meeting

Meeting Place

28-04-2026 at 12.30 P.M. in O/o EE/ELD-9

Important Dates

Last Activity

8 Jun 2026

Published

27 Apr 2026

Bid Opening

7 May 2026

Download Starts

27 Apr 2026

Download Ends

6 May 2026

Submission Starts

29 Apr 2026

Pre-Bid Meeting

28 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (13 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Operation and maintenance of clear water booster pump set, DG and substation equipment and other allied accessories attached at the following site at different locations of sector-28 at Block ‘A’& 'C, Rohini as per inventory terms & conditions attached.
1.01	Wireman/Pump/D.G Set operator Grd-I ,2 Nos.-1 no. for morning shift for both the pump houses i.e. from 6.00 a.m. to 2.00 p.m. and 1 No.for evening shift for both the pump houses i.e. from 2.00 p.m. to 10.00 p.m. or as when required.	-	Month	72,422	-
1.02	Khallasi cum Chowkidar ,2 Nos.-1 no. for each for pump house in night shift i.e. 10.00 p.m. to 6.00 a.m.	-	Month	59,771	-
2	Supply & replacement of following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. i/c Rebate for dismantle material. a) 250 A,36KA,FPMCCB	-	Each	22,438	-
2.1	b) 400 A,50KA,FPMCCB	-	Each	54,547	-
3	LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard DeviationColour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)including rebate for dismantle material..18- 22 Watt Servicing and overhauling the following capacity DG Set of 'Kirloskar' make	-	Each	647	-
4	320 KVA DG Set i/c supply and replacement of following items/ parts. i. Mobil Oil -50 ltr. ii. Diesel Filter -1 No. iii. Oil Filter -1 No. iv. Super by Pass Filter -1 No. v. Air Filter -1 No. vi. Coolant -30 ltr. vii. Water temp. Gauge -1 No. viii. O Ring -3 Nos.	-	Job	85,291	-
4.1	380 KVA DG Set i/c supply and replacement of following items/ parts. i. Mobil Oil -60 ltr. ii. Diesel Filter -1 No. iii. Oil Filter -1 No. iv. Super by Pass Filter -1 No. v. Air Filter -1 No. vi. Coolant -35 ltr. vii. Water temp. Gauge -1 No. viii. O Ring -3 Nos.	-	Job	1,11,508	-
5LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
5.1	100 watt	-	Each	2,266	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 3.78 MB

Work Item Documents

NIT04.pdf

Tender Documents • 1.82 MB

BOQ_952872.xls

BOQ • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

NKENGGWORKS

L1₹15.7 LAdmitted-Finance

G 15 PKT 2 NARAINA VIHAR NEW DELHI 110028 | NEW DELHI | DELHI | 110028

continental electricals

L2₹16.9 L+₹1.2 L (7.74%)Admitted-Finance

PUMPS ENGINEERING AND ASSOCIATES

Rejected-Technical

B 1124 SHASTRI NAGAR DELHI 110052 | NORTH | DELHI | 110052

SATKAR ELECTRICALS

Rejected-Technical

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Operation and maintenance of clear water booster pump set, DG and substation equipment and other allied accessories attached at the following site at different locations of sector-28 at Block ‘A’& 'C, Rohini as per inventory terms & conditions attached.
1.01	Wireman/Pump/D.G Set operator Grd-I ,2 Nos.-1 no. for morning shift for both the pump houses i.e. from 6.00 a.m. to 2.00 p.m. and 1 No.for evening shift for both the pump houses i.e. from 2.00 p.m. to 10.00 p.m. or as when required.	-	Month	72,422	-
1.02	Khallasi cum Chowkidar ,2 Nos.-1 no. for each for pump house in night shift i.e. 10.00 p.m. to 6.00 a.m.	-	Month	59,771	-
2	Supply & replacement of following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. i/c Rebate for dismantle material. a) 250 A,36KA,FPMCCB	-	Each	22,438	-
2.1	b) 400 A,50KA,FPMCCB	-	Each	54,547	-
3	LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard DeviationColour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)including rebate for dismantle material..18- 22 Watt Servicing and overhauling the following capacity DG Set of 'Kirloskar' make	-	Each	647	-
4	320 KVA DG Set i/c supply and replacement of following items/ parts. i. Mobil Oil -50 ltr. ii. Diesel Filter -1 No. iii. Oil Filter -1 No. iv. Super by Pass Filter -1 No. v. Air Filter -1 No. vi. Coolant -30 ltr. vii. Water temp. Gauge -1 No. viii. O Ring -3 Nos.	-	Job	85,291	-
4.1	380 KVA DG Set i/c supply and replacement of following items/ parts. i. Mobil Oil -60 ltr. ii. Diesel Filter -1 No. iii. Oil Filter -1 No. iv. Super by Pass Filter -1 No. v. Air Filter -1 No. vi. Coolant -35 ltr. vii. Water temp. Gauge -1 No. viii. O Ring -3 Nos.	-	Job	1,11,508	-
5LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
5.1	100 watt	-	Each	2,266	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Operation and maintenance of clear water booster pump set, DG and substation equipment and other allied accessories attached at the following site at different locations of sector-28 at Block ‘A’& 'C, Rohini as per inventory terms & conditions attached.

1.01

Wireman/Pump/D.G Set operator Grd-I ,2 Nos.-1 no. for morning shift for both the pump houses i.e. from 6.00 a.m. to 2.00 p.m. and 1 No.for evening shift for both the pump houses i.e. from 2.00 p.m. to 10.00 p.m. or as when required.

Month

72,422

1.02

Khallasi cum Chowkidar ,2 Nos.-1 no. for each for pump house in night shift i.e. 10.00 p.m. to 6.00 a.m.

Month

59,771

Supply & replacement of following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. i/c Rebate for dismantle material. a) 250 A,36KA,FPMCCB

Each

22,438

2.1

b) 400 A,50KA,FPMCCB

Each

54,547

LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard DeviationColour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)including rebate for dismantle material..18- 22 Watt Servicing and overhauling the following capacity DG Set of 'Kirloskar' make

Each

647

320 KVA DG Set i/c supply and replacement of following items/ parts. i. Mobil Oil -50 ltr. ii. Diesel Filter -1 No. iii. Oil Filter -1 No. iv. Super by Pass Filter -1 No. v. Air Filter -1 No. vi. Coolant -30 ltr. vii. Water temp. Gauge -1 No. viii. O Ring -3 Nos.

Job

85,291

4.1

380 KVA DG Set i/c supply and replacement of following items/ parts. i. Mobil Oil -60 ltr. ii. Diesel Filter -1 No. iii. Oil Filter -1 No. iv. Super by Pass Filter -1 No. v. Air Filter -1 No. vi. Coolant -35 ltr. vii. Water temp. Gauge -1 No. viii. O Ring -3 Nos.

Job

1,11,508

5LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

5.1

100 watt

Each

2,266