REPAIR / REPLACEMENT OF INTERNAL ELECTRIFICATION AND CONNECTED WORKS IN OTM AND MD ACCN OF ZONE -II UNDER AGE E/M-II OF GE ( SOUTH ) MEERUT CANTT

Amount

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators etc removing material from site complete all as specified and directed.

All as per item No 1.00 above but except conduit.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in existing PVC / MS concealed conduit of any size/dia complete with all accessories / fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point / Bell point controlled by one, one way switch 05 / 06 Amps.

All as per item No 3.00 here -in- before but for One ceiling / Exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as per item No 3.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per item No 3.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per item No 3.00 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point / bell point controlled by one, one way switch 05 / 06 Amps.

All as per item No 8.00 here -in- before but for One ceiling / Exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as per item No 8.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per item No 8.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 8.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Supply and fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.

Supply and fixing socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed by Engr-in-Charge

Supply and fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed by Engr-in-Charge

Supply and fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed.

Supply and fixing bell push flush type , 5 amps , 240 volts all as directed.

Supply and fixing door bell ding dong type , 240 volts AC complete all as specified and directed.

Supply and fixing steped type electronic fan regulator flush type AC, 230 volts, (switch type or socket type all as per exiting or as per site requirement ) complete all as specified and directed.

Supply and fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed .

Supply and fix decorative LED Tube light fitting 1x20 Watt , environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No having single side connection, complete with all accessories and fixing material all as specified and directed .

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp complete including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing of ceiling rose, 3 terminal /PVC/polycarbonate isolated body complete all as specified and directed.

Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into existing rigid non metallic PVC concealed conduit including and taking down the old unserviceable submain wiring of ant type complete all as specified and directed.( Note - One meter of 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length).

All as item No 24.00 above, but by using two single core cable of 4.0 Sqmm for Phase and neutral + 1 single core cable of 4.0 Sqmm for earth wire complete all as directed.

All as item No 24.00 above, but by using two single core cable of 2.5 Sqmm for Phase and neutral + 1 single core cable of 2.5 Sqmm for earth wire complete all as directed.

All as item No 24.00 above, but by using four single core cable of 10 Sqmm for Phase and neutral + 1 single core cable of 10 Sqmm for earth wire complete all as directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed Make - ABB/ Legrand/ Havells/ Schneider

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed Make - ABB// Legrand/ Schneider/ Havells.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed Make - ABB/ Legrand/ Schneider/ Havells

Supply and fixing MCB, SP, AC, 240 volts "C" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed.

Supply and fixing MCB, SPN ( Single Pole and Neutral), AC, 240 volts, C series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified and directed.

Supply and fixing MCB, DP, AC, 240 volts, C series capacity 40 Amps to 63 Amps 10KA complete all as specified and directed.

Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 and IK 09 protection including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed.

Supply and Isolator 4 pole 'B' series 100 amps capacity AC 415 V,10kA complete all as specified and directed.

Supply and Isolator 4 pole 'B' series 63 AMP amps capacity AC 415 V,10kA complete all as specified and directed.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP & N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 protection, including 100 Amp MCCB 4P, 415 Volt AC, 25KA 01 No as incommer and have provision for MCB's for out going circuits inside of DB, including chases and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one and taking down the old distribution board of any type complete all as directed. Make: ABB/ Havells/ Legrand/ Schneider.

Supply and fix MCCB 4 pole, 100 Amp, 415 V, 25 KA all as specified & directed by Engr-in-Charge.

Supply and fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 to 32 Amps MCB as per site requirement & directed by Engr-in-Charge, single pole, AC, 240 volts and flush to wall including all cutting and chases etc on wall and making good including two coats of white/ colour washing / distempering etc to match the existing disturbed surface complete all as directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.Note- After completion of work if desired test result is not obtained the earthing to be redone with out any extra cost of department .

Taking down carefully under ground cable of any size and making good to disturbed surface as per existing complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

All as per item No 42.00 but 16 Sqmm 2 core complete all as specified and directed.

All as per item No 42.00 but 10 Sqmm 2 core. complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and geting out complete all as specified and directed.

Material and labour for sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supply / laying and fixing 50 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches wall/floor for cable protection complete all as specified and directed.

All as per item No 48.00 here-in-before but of size 40 mm in dia complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick in soft / loose soil complete all as specified and directed.

Removing surplus excavated materials not exiding 50 mtr and depositing where directed at a level not exiding 1.5 mtr above the starting point complete all as specified and directed.

Supply and fix in repair, security light brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete, including distempering to match with existing surface all as specified and directed. Make: Jindal /Tata/ Surya.

Supply and fixing in repair LED security light fitting 1x45 watt luminaries with die cast aluminium housing comprising epoxy powder coated enclosed with glass cover embedded lens in frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed. Make: Havells/ Crompton/ C&S.

All as per Item No 53 above but capacity 25 watt. Make: Havells/ Crompton/ C&S.

Supply and fix in repair decorative LED Tube light fitting 1x20 Watt , with opal diffuser, environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No, 20W, complete with all accessories and fixing material all as specified and directed

Supply and fixing in repair LED Tube rod 1x20 Watt , energy efficient suitable for MS batten with retrofit T8 polycarbonate tube, having both end connection, complete with all accessories and fixing material all as specified and directed by Engr-in-Charge.

Supply and fixing in repair LED Tube rod 1x20 Watt , energy efficient suitable for MS batten with retrofit T8 polycarbonate tube, having one end connection, complete with all accessories and fixing material all as specified and directed by Engr-in-Charge.

Supply and fix in repair LED lamp 9 watt of complete all as specified and directed.

Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.

All as item No 59.00 above but socket outlet 5 pin, 05 / 06 Amps flush type 240 volts . Make- Anchor/ Havells/ Plaza/ Cona.

All as item No 59.00 above but switch piano flush type, 15 / 16 Amps single pole, one way 240 volts.

All as item No 59.00 above but socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts

All as item No 59.00 above but switch bell push flush type , 5 amps , 240 volts.

All as item No 59.00 above but door bell ding dong type , 240 volts AC.

All as item No 59.00 above but steped type electronic fan regulator Switch/ Socket type , AC, 230 volts all as per existing or as required at site as directed by Engr-in-Charge.

All as per item No 59.00 above but lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

Supply and fix in repair fan capacitor 2.5 MFD single phase 230 volt complete all as specified and directed.

Supply and fixing in repair LED light 12 watt square type of size 150x150mm or round type 150mm dia surface/ ceiling mounted with aluminium hausing and frosted cover complete all as specified and directed. Make: Havells Cat No -LHEBAEP6IZIWO12 or equavelent in Crompton/ Bajaj.

Supply and fix in repair modular switch single pole 230 volt one way 6 A complete all as per existing make and model all as specified and directed by Engr-in-Charge.

Supply and fix in repair modular socket, 6A-2/3 pin combined 2 module complete all as per existing make & model all as specified and directed by Engr-in-Charge.

Supply and fix in repair modular switch 1 way 16 A, 1 module complete all as per existing make & model all as specified and directed by Engr-in-Charge.

Supply and fix in repair modular socket, 6/16A-2/3 pin combined 2 module complete all as per existing make & model all as specified and directed by Engr-in-Charge.

Supply and fix in repair modular fan step regulator, 120W- 2 module complete all as per existing make & model all as specified and directed by Engr-in-Charge.

Supply and fix in repair modular bell push 6A 1 module complete all as per existing make & model all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 25 watts LED post light fitting spun aluminium body finished with stove enameled and transparent acrylic cover, symmetrical light distributionwith high power LEDs as light source IP 65 protection all as specified and directed.: Make- Havells model ruby/ Crompton/ Bajaj.

Supply and fixing recess/surface mounting LED 2x2 luminaire 35/36 W CRCA powder coated housing with anti glare diffuser new deep back lit panel including driver, holders and LED lamp suitable for roof/ceiling including connecting up withflexible copper conductor cases of suitable size completed all as specified and directed by Engr-in-Charge.Make: Havells/ Crompton/ Wipro/ C&S.

Supply and fixing LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size completed all as specified and directed by Engr-in-Charge. Model -HEXA 10W, Make: Havells or equivalent in Crompton

Supply and fixing in replacement of wall mounted polycarbonate fancy light suitable for 9/10 watt LED bulb and including 9/10 led Bulb. (frame and light) completed all as specified and directed. Make: Model No- Comet 30575, Havells/C&C/Surya/Bajaj/Crompton.

Supply and fixing in rapairs round surface mounted LED down light 10 watts, with white powder coated polycarbonate decorative housing and pressure die-cast heat sink having high efficiency with heavy duty driver. Model - INTEGRA NEO (SURFACE), Make - Havells or equivalent in Crompton/Bajaj/Suriya.

Supply and fixing in replacement of modular white cover plate with frame, 3 module, 240 volts complete all as specified and directed. Make: Indoasian / Legarnd/ Havells .

Supply and fixing in replacement of modular white cover plate with frame,4 module , 240 volts complete all as specified and directed .Make: Indoasian / Legarnd/ Havells .

Supply and fixing in replacement of modular white cover plate with frame,6 module, 240 volts complete all as specified and directed .Make: Indoasian / Legarnd/ Havells .

Supply and fixing in replacement of modular white cover plate with frame,8 module, 240 volts complete all as specified and directed . Make: Indoasian / Legarnd/ Havells .

Material and labour for fixing in repair pressed steel terminal box not less than 50mm deep with 3 mm thick laminated sheet on top for mounting switch/socket/ regulator incl taking out old box and making good the disturbed surface as per existing of the 75x75 mm size.

All as item No 84.00 above but 100x100 mm size.

All as item No 84.00 above but 150x75 mm size.

All as item No 84.00 above but 175x100mm size.

All as item No 84.00 above but 200x150mm size.

Supply and fixing in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp complete including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repairs LED driver suitable for 25 w LED security lights as per existing Make and Model at site .

Supply and fix in repairs LED driver suitable for 45 w LED security lights as per existing Make and Model at site.

Supply and fix in repairs LED driver suitable for 36/42 w LED Panel light fitting 2x2 as per existing Make and Model as per site requirement.

Supply and fix in replacement emergency bulb 9W, lumen output 6500K, with inbuilt rechargeable battery of capacity 2200mAH with base cap B22, Product Code - NE9001, Make- Havellsor Equivalent in Havells/Surya.

Jain Traders

Adhar Enterprises