Tender ID

DEFPROC

Active

Works

Miscellaneous Works

REPAIR / MAINT TO WOODEN / STEEL FURNITURE INCLUDING RE-CANNING, WEAVING, POLISHING AND PAINTING AT AF STN BIHTA

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

Bihta | Patna, Bihar

Amount: ₹10 LCloses: 10 Nov 202629 Oct 2026Due today

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published9 Oct 2026
Submission Opens23 Oct 2026
Closes10 Nov 202629 Oct 2026
Bid Opening14 Nov 20262 Nov 2026

Corrigenda

Corrigendum

2 updatesLatest on 5 Nov 2026Submission Ends:29 Oct 202610 Nov 2026

Date changes

Download Ends29 Oct 202610 Nov 2026Submission Ends29 Oct 202610 Nov 2026Bid Opening2 Nov 202614 Nov 2026

Tender Value

₹10 L

EMD Value

₹20,000

Closing Date

10 Nov 2026, 6:00 pmDue today

Tender Inviting Organisation

Name

GARRISON ENGINEER AIR FORCE BIHTA

Address

Military Engineer services AF Stn Bihta 801103

Work Description

REPAIR / MAINT TO WOODEN / STEEL FURNITURE INCLUDING RE-CANNING, WEAVING, POLISHING AND PAINTING AT AF STN BIHTA

Tender Information

Tender ID

2026_MES_793039_1

Reference Number

GE/AF/BHT-31/2026-27

Tender Type

Open Tender

Product Category

Miscellaneous Works

Form of Contract

Item Rate

Period of Work

180 days

Location

Bihta

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Refer NIT and Tender Documents

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredScanned copy of application on letter head of firm and MES enlistment letter (.pdf)

RequiredScanned copy of cost of tender as per NIT in form of DD/ Banker cheque in favour of GE AF Bihta (.pdf)

RequiredScanned copy of provident fund code number issued vide competent authorities (.pdf)

RequiredScanned copy of GST registration number (.pdf)

RequiredFor unlisted contractor scanned copy of document meeting enlistment criteria in MES as per NIT (.pdf)

RequiredFor unlisted firm police verification from police authority or valid For unlisted firm police verifi (.pdf)

Finance

RequiredBoQ (.xls)

RequiredTender Documents (.pdf)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE AF BIHTA

EMD Fee Amount

₹20,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

10 Nov 2026

Published

9 Oct 2026

Bid Opening

14 Nov 2026

Download Starts

9 Oct 2026

Download Ends

10 Nov 2026

Submission Starts

23 Oct 2026

Clarification Period

10 Oct 2026 - 22 Oct 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (186 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1PART-I WOODEN FURNITURE
2BED PLYWOOD TOP (Drawing No-FD-213 & 246)
2.01	Removing worn out ply wood from head rest board and providing new teak ply of head rest (of suitable size), 3.5 mm thick one side teak faced and other side commercial plywood including 12mm x 10mm half round teak wood beading on head rest & preparation of surface & applying high gloss French polish on newly fixed head rest to match the colour with existing surface complete all as shown on drawing.	2	Each	-	-
2.02	Description all as item No.-2.01 above but Foot rest.	2	Each	-	-
2.03	Long rails of bed plywood top made out of 1st Class hard wood (shesham / Teak wood) of size 1800x100x35 mm and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing.	5	Each	-	-
2.04	Plywood top 12 mm thick, commercial BWR of size 1800mm x 900 mm , IN REPLACEMENT, complete all as shown on drawing and directed.	25	Each	-	-
2.05	Legs of head board made out of Ist class hard wood (shesham / Teak wood) of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed.	4	Each	-	-
2.06	Legs of foot board made out of Ist class hard wood (shesham / Teak wood) of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, comlpete all as per drawing and as directed.	4	Each	-	-
3CHAIR DINING (Drawing No-FD-16, 203, 228, 279 & FD/E6MAP/04)
3.01	Front legs made out of Ist class hard wood (shesham / Teak wood) of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed.	30	Each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.39 MB

Work Item Documents

BOQ_889310.xls

BOQ • 0.54 MB

tender312627.pdf

Tender Documents • 0.65 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1PART-I WOODEN FURNITURE
2BED PLYWOOD TOP (Drawing No-FD-213 & 246)
2.01	Removing worn out ply wood from head rest board and providing new teak ply of head rest (of suitable size), 3.5 mm thick one side teak faced and other side commercial plywood including 12mm x 10mm half round teak wood beading on head rest & preparation of surface & applying high gloss French polish on newly fixed head rest to match the colour with existing surface complete all as shown on drawing.	2	Each	-	-
2.02	Description all as item No.-2.01 above but Foot rest.	2	Each	-	-
2.03	Long rails of bed plywood top made out of 1st Class hard wood (shesham / Teak wood) of size 1800x100x35 mm and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing.	5	Each	-	-
2.04	Plywood top 12 mm thick, commercial BWR of size 1800mm x 900 mm , IN REPLACEMENT, complete all as shown on drawing and directed.	25	Each	-	-
2.05	Legs of head board made out of Ist class hard wood (shesham / Teak wood) of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed.	4	Each	-	-
2.06	Legs of foot board made out of Ist class hard wood (shesham / Teak wood) of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, comlpete all as per drawing and as directed.	4	Each	-	-
3CHAIR DINING (Drawing No-FD-16, 203, 228, 279 & FD/E6MAP/04)
3.01	Front legs made out of Ist class hard wood (shesham / Teak wood) of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed.	30	Each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1PART-I WOODEN FURNITURE

2BED PLYWOOD TOP (Drawing No-FD-213 & 246)

2.01

Removing worn out ply wood from head rest board and providing new teak ply of head rest (of suitable size), 3.5 mm thick one side teak faced and other side commercial plywood including 12mm x 10mm half round teak wood beading on head rest & preparation of surface & applying high gloss French polish on newly fixed head rest to match the colour with existing surface complete all as shown on drawing.

Each

2.02

Description all as item No.-2.01 above but Foot rest.

Each

2.03

Long rails of bed plywood top made out of 1st Class hard wood (shesham / Teak wood) of size 1800x100x35 mm and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing.

Each

2.04

Plywood top 12 mm thick, commercial BWR of size 1800mm x 900 mm , IN REPLACEMENT, complete all as shown on drawing and directed.

Each

2.05

Legs of head board made out of Ist class hard wood (shesham / Teak wood) of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed.

Each

2.06

Legs of foot board made out of Ist class hard wood (shesham / Teak wood) of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, comlpete all as per drawing and as directed.

Each

3CHAIR DINING (Drawing No-FD-16, 203, 228, 279 & FD/E6MAP/04)

3.01

Front legs made out of Ist class hard wood (shesham / Teak wood) of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed.

Each