PROVN OF CERTAIN SANCTION WORKS AT MIL STN NABHA UNDER GE(S) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

M & L for 15mm thick ( in two layers of 10mm and 5mm thickness) cement pastering in cement mortar 1:4 and mixig the water proofing compound as per manufactures instructions on brick or concrete surface of wall finished complete all as specified and directed Note : Water proofing compound shall be measured and paid saparately under item .

M&L 10mm thick cement plastering in cement mortar 1:6, finishing the surface even and smooth without using extra cement complete all as specified and directed.

Complete removal of existing treatment of any type/description such as distempering work ,internal emulsion etc from internal/external surfaces of walls & ceiling with mechanical means/grinder including removal of material from site complete all as specified and directed.

M&L Preparation of new plastered or unplastered surfaces of walls, two coats of cement base paint complete all as specified and directed.

M&L for applying 3mm thick wall care putty on wall over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L prepration of new plastered or unplastered surface of walls and applying two coats of distemper oil emulsion complete all as specified and directed.

Supplying & applying (two component elastomeric acrylic polymer modified) cementitious waterproofing coating on Brick level, SmartCare Damp Block 2K or approved equivalent, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTMC1202, crack bridging up to 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI, will be apply on both Positive & Negative side and resist up to 5 Bars of Hydrostatic Pressure. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc. After coating will sprinkle Sand on the coating then apply plaster on the coating which is in contractor scope,complete all as specified and directed.

Supply only integral water proofing compound ISI marked complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar 1:3 as on concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces applying three coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparing old plastered surfaces of ceilings and applying one coat of white wash complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

All as per srl item No 14 hereinbefore but n. exc 1.5 sqm each complete all as specified and directed.

S&F Powder coated Pressed steel frames (size 105x 60mm) made of MS sheet of 1.25 mm thickness for doors with single rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 type C0) in chowkhats , PCC 1:2:4 type B1 as in hold fast blocks etc., complete all as specifiedand directed. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in the unit quoted rate of item.

S&F Powder coated Pressed steel frames (size 125x 60mm) made of MS sheet of 1.25 mm thickness for doors with double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 type C0) in chowkhats , PCC 1:2:4 type B1 as in hold fast blocks etc., complete all as specified and directed. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in the unit quoted rate.

S&F 35mm thick plain framed (Factory made) Panelled shutters of 2nd class HW without lock rail and panels of 9mm B.W.P commercial ply including beading on the facing side of shutters as per SSR Part I clause No 8.17.5. The size of rail and stiles as per IS 1003 (Part I) kiln seasoned and chemically pressure complete all as specified and directed.

S&F 35mm 2nd class hard wood Glazed and skeleton shutters, 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Aluminium anodised , barrel tower bolt of size 200mm complete all as specified and directed

S&F Aluminium anodised sliding door bolt of size 250mm, stove enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and as directed.

S&F Aluminium handles 125mm cast type , anodised complete all as specified and directed.

S&F Mild steel butt hinges of size 100mm medium weight cold rolled complete all as specified and directed

S&F in repair 300 mm long MS rat tail pattern spring hinge including roller and roller plate, complete all as specified and directed.

S&F Floor door stoper of aluminum alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

Supply and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in complete all as specified and directed including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.

S&F Steel ventilators fixed type with glazing bars complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for preparing of new surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel pain and one coat of pink primer complete all as specified and directed.

M&L for preparing surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red oxide primer on new surfaces of steel or iron, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed.

Dismantling of floor or wall tiling including cement mortar bedding but not backing and removing the rubbish off the premises complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregates complete all as specified and directed.

M&L for Ceramic floor tiles of 7 to 8mm thick area of each tile exc 0.18sqm but not exc 0.38sqm in floor etc set and jointed in neat cement slurry and pointed in white cement to match over and including 15mm thick screed bed in CM (1:4) laid in complete all as specified and directed.

M&L for Non Skid coloured tiles 7 to 8(square/rectangular) area of each tile exc 0.06sqm but not exc 0.11sqm in flooring etc set and jointed in neat cement slurry and pointed in white cement to match over and including 15mm thick screed bed in CM (1:4) laid in complete all as specified and directed.

M&L for coloured glazed ceramic tiles (300 x 600 mm) x 7mm or (300 x400 mm)X7mm thick as in vertical surfaces such as skirtings, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick back coat in CM (1:4), in complete all as specified and directed.

S&F sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes icluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm.complete all as specified and directed.

Taking Up or down steel tubing of size 15mm bore complete all as specified and directed.

Taking Up or down steel tubing of size 20mm bore complete all as specified and directed.

Supply and laying of 20mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fitting fixed on wall / celling or laying in floor complete all as specified and as directed.

Supply and laying of 25mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fitting fixed on wall / celling or laying in floor complete all as specified and as directed.

S&F mild steel chromium plated 20mm curtain rod with & including brackets, stops rollerss complete incl fixing brackets, stops etc complete all as specified and directed. (For the purpose of mesurement and payment running length of curtain rod only shall be considered.)

S&F 18 mm thick LEAD FREE PVC celuka ply of one side white and other side wooden finish color fixed with screws, solvent cement/adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacture's specification complete all as specified and directed. NOTE: Weight of ply should not less than 10kg per sqm.

S&F 12 mm thick LEAD FREE PVC celuka ply of approved colour, fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinets back and pull out drawer sides complete as per manufacture's specification complete all as specified and directed. NOTE: Weight of ply should not less than 10kg per sqm

S&F 6 mm thick LEAD FREE PVC ply fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinets back and pull out drawer sides complete as per manufactured's specification complete all as specified and directed. NOTE: Weight of ply should not less than 10kg per sqm

S&F tower bolts 150 mm long of stainless steel 304 finished/of outer plate metal matt finished complete all as specified and directed.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 Kg complete all as specified and directed.

S&F Paino/continuous hinge of size 30 mm stainless steel complete all as specified and directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacture's instructions complete all as specified and directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150 mm long matt finished complete fixed in position complete all as specified and directed.

S&F stainless steel 304 grade wire Basket (avg wait 2.5 to 4 Kg per basket) of pull out type like plain/cup& saucer/bottle/multi purpose/2-3 shelf baskets etc for kitchens of required suze complete fixed in position complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layar on roofs complete all as specified and directed.

Demolation of mud puska and removing on roof any thickness as complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 using 12.5 mm graded crushed stone aggregates as in padding over roof a slope of 1:100 (minimum thickness 25mm) with & including water proofing compound finish even and smooth without using extra cementcomplete all as specified.

M&L for the following roof treatment. (a) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick weight not less than 3.60kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt, fixed as per manufacturer’s instructions complete all as specified and directed. (b) Applying one coat of bituminous primer confirming to IS-3384 @ 0.3 Ltr/Sqm. (c) Applying one coat of aluminium paint over APP membrane @ 0.50 litres per Sqm all as specified and directed. (d) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per square metre including cleaning the surfaces all as directed and specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame atsite as per specification & drawing complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification and drawing complete all as specified and directed.

S&F PVC(SWR) Floor trap 75mm plain with & including CP grating including jointing to wate pipe with solvent cement complete all as specified and directed.

S&F PVC ( SWR) rain water pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete as specified including flat iron clamps 25x3mm of required shape & size and taking out old damaged AC rain water pipes complete all as specified and directed.

S&F PVC (SWR) bends of any radius for 110 mmdia rain water pipes with rubber ring joints complete all as specified and directed.

S&F rotational moulded polythene water storage tank (ISI marked) cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position incl demolition of existing Rcc tank and incl 20 mm bore ball brass valves high pressure with polythene float and fly nut complete all as specified and directed.

S&F 125mm Brass chromium plated shower rose complete all as specified and directed.

S&F in Repair Bib taps for 15 mm dia bore pipe cast copper alloy chromium plated with capstain head screwed down for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair Pillar taps Cast copper alloy fancy type 15mm bore , with capstan heads Brass CP mixer for mixing hot & cold water screwed down for iron pipe fixed with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in Repair stop cock cast copper alloy chromium plated fancy type ,high pressure with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipe after taking down old stop cock of any description complete all as specified and directed.

S&F in Repair Angle stop valve(Concealed type) cast copper alloy chromium plated with capstan head , long shank and cup screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipeafter taking down old stop cock of any description complete all as specified and directed.

S&F in Repair 20mm Stop valves/ gate valve , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in Repair 450 mm long PVC connection with brass nuts on both ends for 15mm bore pipes of approved quality complete all as specified and directed,

M&L for viterous china, wash hand basin, white, flat back, size 550x400mm including PVC waste pipe 32mm bore and mild steel brackets, fixed all in repairs, including cutting for or pinning in brackets complete all as specified and directed

S&F Tubular towel rail, CP 20mm dia, 60cm long between flanges fixed in repairs complete all as specified and directed.

S&F low level flushing cistern of PVC 10 ltr capicity incl 45cm long PVC connection with brass nut at both ends, 15 dia stop cock cast copper alloy,screwed both ends , high pressure(wt not less than as specified in SSR), PVC flush pipe 32 mm bore complete all as specified and directed.

S&F viterous china ware wash down water closet Orrisa pattern size 580x440mm white with integral foot rests including connection to traps and to flushing pipe, anti syphonage pipe complete fixed in repair complete all as specified and directed.

M&l for Hard core of broken bricks of gauge n exc. 63 mm spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC (1:3:6), 50mm thick, using crushed stone aggregate of size 12.50mm as in PCC path/ plinth protection.finished the surfaces even and smooth with out using extra cement complete all as specified and directed.

M&L for 20mm thick black colure granite Machine cut as in border (Patti) laid over cement screed 15mm thick in CM 1:4 over and jointed with gray cement slurry mixed with pigment including rubbing and polishing complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20mm (+2mm) thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over & including 25mm thick cement concrete type B-0 (12.5mm graded aggregate) complete all as specified and directed.

All as per item No 78 here in before on vertical surfaces as in skirting/dado of size as required at site but excluding 25mm thick PCCcomplete all as specified and directed.

S & F Stainless steel (minimum thickness 1mm) wall mounted kitchen dish plate rack of size 750mm X600mm X 250 mm as described complete all as specified and directed.

S&F PVC enclosed case (cabin type) with cover and looking mirror over it with two shelves in it complete all as specified and fixed with screws on wall complete all as specified and directed.

S&F cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floor of 100 mm bore with sand cast paper complete all as specified and directed.

S&F cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floor of 75mm bore with sand cast paper complete all as specified and directed.

S&F cast iron 100mm sand cast vent cowl with cement joints bore with sand cast paper complete all as specified and directed.

S&F CI floor trap with & including CP grating including jointing to waste pipe in neat cement 75 mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S&F in repair 100 mm branch pieces, double/cross, Tee (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch complete all as specified and as directed.

S&F CI P & S trap including jointing to waste pipe in neat cement 100 mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

Demolition and breaking up 150mm drain pipes set in cement mortar (salt glazed stoneware/asbestos cement/reinforced) and removal of debris to low lying area to a distance not exceeding 100m, of the following sizes complete all as specified and directed.

M&L for reinforced concrete pipes, class NP2 laid and jointed complete with collars bore in pipes 150mm complete all as specified and directed.

M&L for150mm bore, cement concrete bed 1:3:6 type C2, using 40mm graded crushed stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and fitted for the following sizes complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in deep and getting out in soft/loose soil for foundations, etc or for shafts, wells, cesspits, manholes, pier holes, etc complete all as specified and directed.

Removing excavated material(soil) to a distance not exc 50mm and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed.

M & L for PCC 1:2:4, type B1, using 20mm size graded stone agregates as in bands, copings, foundation filling and mass concrete for poles etc., including necessary formwork complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soils complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quions, arches, pillers, etc complete all as specified and directed.

M&L for Brick work in cm 1:4 with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius for manhole and septic tank/soakage well repair work complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete of any description (Reinforecement cut as required to facilitate demolition ) complete all as specified and directed.

M&L for reinforcement cement concrete (Nominal mix )1:2:4 Type B1 (20mm graded crushed stone aggregate) as in slab support on wall , beams and collums in floor roof landing balconies deck slab and in shelves and the like complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia all as specified complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening Fe410 (Gde E-250) Fe-310-O Note - Removing of old gate fixing new steel gate of hold fast , finish the surface included in this item complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone agg as in foundation filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix), using 20 mm graded crushed stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, Footings complete all as specified and directed

M&L for reinforced Cement Concrete (nominal mix) in Columns, pillars, piers, posts and struts in concrete grade M-25 complete all as specified and directed.

M&L for Mild steel TMT round bars (Fe-500) 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

M&L for Formwork to side of pillars ,post, struts,piers, columns and stanchions complete all as specified and directed.

M&L Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over and including 15mm thick screeed bed or bedding layer in CM (1:4), in complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded aggregate as in sub base,complete all as specified and directed.

M&L for Machine pressed precast concrete inter locking paver block any shape and size made of M-40 grade concrete (with grey cement and no pigment) of 60mm thickness laid over and including 25mm thick (compacted) fine sieved sand complete all as specified and directed.

S&F 25 mm thick precast cement concrete type B0 (1:2:4) 12.5 mm graded aggregate set and jointed in CM (1:4) louvres as in and jallies including all mouldings complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/loose soil and ramming the same to actual size n.exc 50m complete all as specified and directed.

M & L for PCC 1:3:6, type B-1, using 40mm graded stone aggregate as in foundation for post holes ,complete all as specified and directed.

S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed to self tapping screws as complete all as specified and directed.

M&L for rectangle / Squar /circular hollow section as in main and cross beams, hip and jack rafters purlins, where connected to common rafters and running rails and guides for structural purpose, fixed with angle cleats or other connecting plates to Fe-290 (Gde E-165) complete all as specified and directed.

M&L for Providing, cement concrete Type C1 1:3:6 (20mm graded aggregate) in plinth, Coping rounded or chamfered on edges complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregates as in coping , bed plate and the like including weathering slightly rounded or chamferred angle and throating as directed including provision of necessary form work and finish exposed surface even and smoothwithout using extra cement complete all as specified and directed.

Surface excavation n exc 30 cm deep and avg 15 cm deep and getting out in soft/loose soil complete all as specified and directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvalture, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for Sand filling under floors or in foundations or cushioning underground cable including watering and consolidation complete all as specified and directed. Note of sand cushioning :- Only punned sand will be measured and paid.

M&L for Machine pressed precast concrete inter locking paver block any shape and size made of M-40 grade concrete (with grey cement and pigment) of 80mm thickness laid over 25mm thick (compacted) fine sieved sand complete all as specified and directed. NOTE- Sand filling will be paid under item no-120 separately.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLSH single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLSH controlled by one switch for one light/fan/sockets point/ complete all as specified and directed in ceiling Portion surface conduit wiring to be done. Note : (i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (ii) Neccessary cutting chasing wherever required and making good the disturbed surface inclding plaster & putty work etc. shall be part of job at no extra cost.

All as per item No 123 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed .

All as per item No 123 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed.

All as per serial item No 123 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed.

M&L for Modular switch 1 way 6A, 1 module type complete all as specified and directed.

M&L for Modular switch 1 way 16A, 1 module type complete all as specified and directed.

M&L for Modular Socket, 6A - 5 pin 2 module type complete all as specified and directed.

M&L for Modular Socket 6A/16A - 2/3 pin 2 module type complete all as specified and directed.

Material and labour for Modular Bell push 6A 1 module complete all as specified and directed.

M & L for Fan step regulator, 120W - 1 module complete all as specified and directed.

Supply and Fixing LED light fittings 1 x 20 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as specified and directed.

Supply and Fixing LED light fittings 1 x 10 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as specified and directed.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 7 to 15 watts for batten fitting complete all as specified and directed..

Supply and fix LED Bulb 9 Watt complete all as specified and directed.

Supply and fix LED Bulb 15 Watt complete all as specified and directed.

Material and labour for call bell ding dong AC 230 volt single pole complete all as specified and directed.

Supply and fix in replacement LED light fitting 1 X9w/1 X 10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for replacement of existing earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frame 40x40x6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate complete all as specified and directed and shown in EP-3 of SSR Part-I

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type IP-54 with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The DB shall be fiush fixed and making good the disturbed surface shall be part of job at no extra cost complete all as specified and directed.

Supply and fix in replacement of MCB SPN 16-32 Amp, 10 KVA, 'B' curve, 240 V complete all as specified and directed.

Supply and fix in replacement of MCB SP up to 16-32 Amp, 10 KVA, 'B' curve, 240 V complete all as specified and directed.

Supply and fix in replacement of MCB SPN 6-32 Amp, 10 KVA, 'B' curve, 240 V complete all as specified and directed.

Supply and fix in replacement of MCB SP up to 6-32 Amp, 10 KVA, 'B' curve, 240 V complete all as specified and directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan blades and Re-Fixing / Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Refixing of dismantled exising exhaust fan any type with louver . Note : Fixing of Exhaust Fan on wall with suitable size anchor bolt , making hole in wall for groutng and making good the disturbed surface including plaster work shall be part of job at no extra cost complete all as specified and directed.

M&L for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x6 sqmm ( line conductor) & 1x6 sqmm ( earth conductor), 1100 volt grade drawing in & including heavy duty non metallic PVC conduit , ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note: (i) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (ii) Connections of cables with MCBs or bus bars shall be done through brass/copper thimbles of appropriate size. (iii) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only.

Supply & lay in replacement of existing unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 16 Sqmm 4 Core complete all as specified and directed.

Supply and laying well burnt sub class ‘B’ bricks. ( designated 75) locally available best quality laid dry in trenches for protection of underground cable complete all as specified and directed.

Material and labour for replacement of GI tubing medium grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

S&F Vertical three phase MCB distribution board powder coated double door flush mounted complete with locking arrangement suitable for 4 way VTPN, IP-54, with MCCB of capacity 63 Amp FP as incomers and MCB's as out going with rated bus bar 200 Amp link 230 volt complete all as specified and directed. Note :- . (i) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (ii) Connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (iii) All the vacant holes of the DB shall be provided with blank plates of appropriate size.

S & F new generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with suitable dia light grade GI pipe bend to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed.

M&L for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x1.5 sqmm ( line conductor) & 1x1.5 sqmm ( earth conductor), 1100 volt grade drawing in & including heavy duty non metallic PVC conduit , ISI marked, incl accessories not less than 25 mm in dia, open/concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed.

M&L for taking down serviceable energy meter and refixing the same after repair work of building complete all as specified and directed.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F 1100 volts grade heavy duty XLPE insulated, armoured heavy duty electric cable with aluminium conductor cross-sectional area 10 sq. mm, 2 core incl grouting into wall , connecting to DB/Panel with suitable size coppr thimbles, making good/mahing the surface of wall complete all as specified and directed.

Supply, installation, commis-sioning of Water cooler fully stainless steel, electric driven single phase 230 volts having approx storage capacity 80 Ltr and cooling capacity 40 Ltrs, entire body including taps and internal tanks made of Food Grade SS-304 Stainless Steel for durability and hygiene. Energy-Efficient: Operating at 230V/50Hz/1Ph power supply, cooling with R-134 refrigerant incl drain pipe complete all as specified and directed .

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA completeall as specified and directed.

Supply & Fix Steel water tubing, 15 mm bore, medium grade, galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Supply, installation, commissioning of Glass Top Deep Freezer capacity 320 Litre single phase 240 volt, 50 Hz complete all as specified and directed.

Supply and fixing LED Solar street light fitting 24 Watt mounted on medium grade GI tubular pole (not less than 7 mtr) including LED luminaire with an inbuilt Lithiumion battery (30 Ah) duly connected with the PV panel, solar panel mounted on top of the pole. In built MPPT charge controller and PIR motion sensor for motion detection. The Solar luminary made up of Aluminium pressure die cast (PDC) housing with IP-65 rating complete all as specified and directed. (Note:- Excavation & earth work shall be measured separately)

S&F Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 4 way double door type with 200 amp rated bus bar as per IS - 8623, IP-54 protection complete all as specified and directed. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be making good as per existing specifications without any extra cost to Govt and the cost of the same is included in the quick quoted rate.

m/s k.k. construction co. (BID ID -3141981)