Providing, installation, testing and commissioning of electro-mechanical machinery alongwith allied works at WSS Majalta under JJM

Amount

DUGWELL / NALLHA TO PUMP ROOM

Providing, installation, testing and commissioning of 6000 GPH x 21-29 meter head mono submersible pump set including LT control panel alongwith allied works which includes providing, fabrication and fitting of MS pipe, flanges,4mm2 aluminium cable 30 meters in length. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles and material handling equipment etc.

STAGE-0 BALGESAR TO MAJALTA

Providing, installation, testing and commissioning of 5000 GPH x 90 meter head HC pump set coupled with suitable rating prime mover (in compliance with the technical conditions) and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block for each pump of size 6’x3’x4’ by using TMT steel bar of 10mm dia for steel mesh. The foundation block as per size of pump set should have additional margin of 6” on all sides. The foundation block may be combined for all the pumps which must include space on all sides of pump set and space between the pump sets. Providing, fabrication and laying of 80mm dia MS suction pipe line to the pump set of length as per site conditions including 80mm dia MS bends, MS flanges, MS expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 80mm dia Cast Iron sluice valve-1no., and / or foot valve-1no., gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of delivery pipe line of 80mm dia alongwith providing and fitting of MS pipe, bends, MS expanders / reducers / MS dismantling joints / MS saddles, MS flanges, cast steel NRV 80mm and sluice valve 80mm dia (Class 150) alongwith providing and fitting of nuts, bolts, washers, gaskets, flanges etc. Job includes providing and fabrication of bypass arrangement across in and out side of NRV. Job includes providing / fitting and laying of single core multi-strand copper cable 35mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 50mm2 copper cable single core multi-strand upto MCCB and further upto voltage stabilizer in four leads conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 100 ampere MCCB of 50KA breaking strength. . Proper earthing of equipment should be done.Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles and material handling equipment etc.

Making of connection of delivery line with common rising main through 100mm dia MS pipe manifold. Job further includes providing and fitting of bus bar arrangement on the walls of the pump room. Job includes providing, laying and fixing of insulation rubber mats on the floor of the pump house around electro mechanical machinery. Job includes providing and fitting of overhead MS girder of required size so as to sustain the load of material / equipment / machinery while lifting / shifting of the material / equipments / machinery alongwith 03 tonnes manually operated chain pulley block at pumping station. Job includes providing of maintenance tool kit alongwith 3 phase welding set (1no), folding bed 01 no., chairs 04 no., fan 01 no. and no. steel almirah 01 no. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc.

Providing, carriage, installation, testing and commissioning of 3 phase, 63 KVA voltage stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 10 gauge container chamber alongwith allied works at WSS Majalta. Job includes providing of 63 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of single core armoured Al. cable of 90mm2 from electric pole to main switch in four leads approximately 50 meters length of each lead. keeping in consideration the short circuit current, de-rating factor/s, voltage drop etc. and must have required insulation and thimbling as per site requirement .The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e. it should work from 180V to 400+5%. Proper earthing of the equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles and material handling equipment etc.

RETROFITTING- PUMPING STATION MAJALTA

Providing, installation, testing and commissioning of 5000 GPH x 300 meter head HC pump set coupled with suitable rating prime mover (in compliance with the technical conditions) and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block for each pump of size 6’x3’x4’ by using TMT steel bar of 10mm dia for steel mesh. The foundation block as per size of pump set should have additional margin of 6” on all sides.The foundation block may be combined for all the pumps which must include space on all sides of pump set and space between the pump sets Providing, fabrication and laying of 80mm dia MS suction pipe line to the pump set of length as per site conditions including 80mm dia MS bends, MS flanges, MS expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 80mm dia Cast Iron sluice valve-1no. and / or foot valve-1no., gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of delivery pipe line of 80mm dia alongwith providing and fitting of MS pipe, bends, MS expanders / reducers / MS dismantling joints / MS saddles, MS flanges, cast steel NRV 80mm and sluice valve 80mm dia (Class 300) alongwith providing and fitting of nuts, bolts, washers, gaskets, flanges etc. Job includes providing and fabrication of by pass arrangement across in and out side of NRV. Job includes providing / fitting and laying of copper cable 50mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 70mm2 copper cable upto MCCB in four leads and further upto voltage stabilizer in four leads approximately 30 meters in length conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 250 ampere MCCB of 50KA breaking strength.Proper earthing of equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles and material handling equipment etc.

Making of connection of delivery lines with common rising main through 100mm dia pipe manifold. Job further includes providing and fitting of bus bar arrangement on the walls of the pump room.Job includes providing, laying and fixing of insulation rubber mats on the floor of the pump house around electro mechanical machinery. Job includes providing and fitting of overhead MS girder of required size so as to sustain the load of material / equipment / machinery while lifting / shifting of the material / equipments / machinery alongwith 03 tonnes manually operated chain pulley block at pumping station. Job includes providing of maintenance tool kit as per enclosed annexure, 01 no. folding bed, 04 no. chairs, one no. fan and 01 no. steel almirah. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc.

Providing, carriage, installation, testing and commissioning of 3 phase, 100 KVA voltage stabilizer copper wound, first quality CRGO silicon steel core, naturally-oil cooled, manually operated, 12 gauge container chamber alongwith allied works at WSS Majalta. Job includes providing of 100 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of single core armoured Al. cable of 90mm2 from electric pole to main switch in four leads approximately 50 meters length and providing and fitting of copper cable 70mm2 approximately 20 meters in length from main switch to voltage stabilizer completed with insulation and thimbling as per site requirement .The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e. it should work from 180V to 400+5%. Proper earthing of the equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools , tackles and material handling equipment etc.

Vaibhav Engineers and Technocrates