Total 19 different works, 03 feeder separation work, 11 dilapidated incoming and outgoing VCB replacement work and improvement work of switchyard of power sub-station on semi-turnkey basis (under 20 crore work plan) under EDD-MEH

DECENTRALISED ITEM NAME (EXCLUDING GST)

RUBBER MAT

4*2.5 MM SQ CONTROL CABLE

2*2.5 MM SQ CONTROL CABLE

MS NUT BOLT OF VARIOUS SIZE

Aluminium P.G. Clamp for Dog

CROSS ARM HOLDING CLAMP

F BRACKET

STAY CLAMP

STAY LOOP INSULATOR

MS NUT BOLT

DANGER BOARD WITH CLAMP

BARBED WIRE

CLAMP FOR CHANEL

GI EARTHING SPIKE MADE OF 20MM SOLID ROD

PG CLAMP

GI PIPE 6"DIA

GAURDING ANGLE CLAMP

WORK DETAILS AND RATES (EXCLUDING GST) (उक्त कार्य के निष्पादन मे प्राक्कलन एवं इस सूची मे दर्ज सामग्री के अतिरिक्त यदि कोई अन्य टी एंड पी आइटम/ विकेंद्रीयकृत सामग्री की आवश्यकता पड़ती है तो कार्यदायी संस्था द्वारा उपलब्ध कराते हुये कार्य को ससमय पूर्ण करा लिया जायेगा एवं कोई अतिरिक्त धनराशि देय नहीं होगी )

Carriage of material From Store To Site

Return of old and Damage material as a received back from Site to Store

Installation and Commisioning of 11 KV VCB(O/G) with all Wirings

Installation and Commisioning of 11 KV VCB(I/C) with all Wirings

Shifting, Loading & Carriage of following material from store center Santkabir Nagar to 33/11 KV S/S Mehdawal RuralShifting, Loading & Carriage of following material from store center Santkabir Nagar to DIFFERENT DIFFERENT S/S UNDER EDD MEHDAWAL 33 KV L.A.(1)/ Bus isolator(1)/post insu.(1)/fuse set with structure(1)/ Bus coupler(1)/11 kv IC Panel(1)/(1)/ TF control panel(1)/CT(1)/VCB with structure(1)

Carriage of 11 kv cables 3*300 mmsq.

Mounting, Fitting & Grouting of following equipments

33 KV L.A(1)./Fuse set(1)/CT(1)/VCB(1)/PI(1)/BI(1)/with struc.complete work with concreating work as structure foundation

33 kv control panel(1)

Jointing charges of C/J Kit with cable

Laying of Control Cable.

Painting of COMPLETE S/S Structure & Equipment (BEFORE 02 LAYER PAINTING WITH 02 DIFFERENT COLOURED PAINT SURFACE PREPARATION WITH RAGMAL PAPER & RED OXIDE 02 LAYER IS INCLUDED )

Body Earthing of indoor panels with materials.

Testing after Completion of work

Dismantling/Removal Work of 11 KV VCB(O/G) with all Wirings

Carriage of Conductor/Material From Store To Site

Grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Stringing & sagging of 3 phase 11 KV line upto proper sag including laying of ACSR Weasel Conductor, binding with insulators & jumpering

Erection of Sectional Double Pole Structure of ST pole including digging of pit, fitting of all accessories, back filling of earth, grouting of each pole & stay sets with materials & other required works.

Erection of single support ST/PCC pole for construction of 11 KV/LT line including digging of pit, fitting of all accessories, back filling of earth & others required work.

Earthing of Poles

Laying of 11 KV XLPE 3x70 SQ MM

Dismantling/Removal Work of 11 KV VCB(I/C) with all Wirings

M/S JAISWAL BROTHERS

M/S MAA KALI TRADERS