PROVISION OF SECURITY LIGHT AT ASC CENTRE AND COLLEGE AND AT ASC CENTRE NORTH, SOUTH AND COLLEGE AND WATER SUPPLY WORKS AT IBLUR CAMP AREA OF ASC CENTRE NORTH 1 ATC AND AT DOMLUR UNDER GE CENTRAL BANGALORE

Amount

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of GI/CI pipe lines etc getting out including forming bottom surface to required level and gradient in hard/dense soil.

All as per item No 2 above but exc 1.5 metre and not exc 3.0 metre deep.

Returning and filling in excavated soil including spreading leveling, watering, well ramming in layers not exc 25 cm thick complete.

Removing of excavated materials not exceeding 50 Mtrs and depositing where directed by Engr- in-Charge at a level not exceeding 1.5 Mtrs above the starting point.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc and removing debris outside MD land complete all as specified and directed.

M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded hard granite stone aggregate) as in foundation, as in coping to Electric Pole and the like including necessary form work and finishing the external surfaces of concrete with 10 mm thick plastering in CM (1:4) finished even and smooth complete all as directed. (Note Quoted rate is deemed to be inclusive of form work and plastering complete.)

M&L for precast cement concrete block masonry type C1, 1:3:6 (20 mm graded granite stone aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Supply and Fixing exhaust fan, 300mm sweep metal body, AC single phase 230/240 Volt including bird free louver shutter cut to fit with hole for exhaust fan including providing holes grouting bolts and 3 core flexible copper conductor cable of size 24/0.20 sqmm connecting up from ceiling rose to exhaust fan terminal complete all as directed. Make Usha/almonard/Crompton/Khaitan/Bajaj.

Supply & Fixing 5 star rated energy saving ceiling fan 1200mm sweep (white) with all accessories and hanging the ceiling fan from fan hook with 3 core flexible copper wire 24/0.20 sqmm from ceiling rose, etc all as directed. Make : Model ES-50 of Havells or equivalent in Usha/Orient.

Provision of trenchless bore using mechanical nuematic drilling equipment for passing electric cables through pipe upto 200mm dia under the existing bituminous/WBM road/PCC hard standings, depth range not less than 1.0 mtr and upto 1.5mtr and making good to the distrubed surfaces of road to match with its existing specifications all as specified and directed by engr-in-charge at site. Note : 1. Quoted rates deems to be inclusing of necessary earth work, transportation charges of Drilling machine and passing pipe through bore complete. 2. Any damage to MES assets caused during trenchless bore shall be recitfied by the contractor at his own cost.

M & L for Sand cushioning and covering with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment)

Supply and laying well burnt bricks, locally available best quality bricks laid breath wise across the length of cable in trenches for protection of UG cables complete all as specified and directed.

S&F new generation energy saving environmental friendly long life, with high power LED building street light/security light 1x 45/40 Watt LED pressure die-cast aluminium, heat resistant, toughened glass diffuser, IP65/66 protection and impact resistant of IK7with 10 KV built-in surge protection device prewired with all accessories and connection up with 3 core flexible copper conductor cable 4/20 mm size, 1.5m long and testing on installation all as specified and directed. Make CG Cat No LSTS-40-CDL-M or equivelent of Bajaj/phillips/Havells.

S&F new generation energy saving environmental friendly long life, with high power LED building street light/security light 1x 60 Watt LED pressure die-cast aluminium, heat resistant, toughened glass diffuser, IP65/66 protection and impact resistant of IK7with 10 KV built-in surge protection device prewired with all accessories and connection up with 3 core flexible copper conductor cable 4/20 mm size, 1.5m long and testing on installation all as specified and directed. Make CG Cat No LST-60-CDL-M or equivelent of Bajaj/phillips/Havells.

S&F new generation energy saving environmental friendly long life, with high power LED building street light/security light 1x 70/72 Watt LED pressure die-cast aluminium, heat resistant, toughened glass diffuser, IP65/66 protection and impact resistant of IK7with 10 KV built-in surge protection device prewired with all accessories and connection up with 3 core flexible copper conductor cable 4/20 mm size, 1.5m long and testing on installation all as specified and directed. Make CG Cat No LST-70-CDL-M or equivelent of Bajaj/phillips/Havells.

S & F Integral compact wide beam high performance LED flood light luminiaire with IP 66 protection, tampered protective toughened glass 5mm thick, thermal shock impact resistance cover, epoxy black powder coated finish, high purity , 120W LED 5000K high power LED of luminous efficiancy greater than 120 Lm/watt with built in control gear fixed to pole/wall, etc and testing complete all as specified and directed. (Make : HAVELLS Model No - JETAIRISFLS120WLED757APWBLTG or equivelant model of Philips/GE/Wipro as approved).

Supply & fix new 9 metres long steel tubular swaged pole complete with cast iron base plate , finial taper plug ,bolts, nuts & screws as specified type 410 SP -31 fixed in position including two coats of aluminium paint over a coat of primer except the planting depth which shall be painted with black bituminous paint including writing pole number using suitable paint complete all as directed. NOTE :- Excavation and PCC will be measured and paid seperately under relevant items.

M & L for Cross arms bracing supports clamps and back plates fabricated from structural steel sections including nut bolt washers welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and including one primer coat of red oxide zinc chrome primer, one under coat and one finishing coat of aluminium paint including taking down old rusted/damaged cross asrms complete all as specified and directed.

M & L for pin type porcelain vitreous white/brown insulator including one galvanised mild steel spindle two galvanised iron nut 100 mm height 65mm dia suitable for 1100 volts grade complete all as specified and directed.

M & L for shackle type porcelain vitreous white/brown insulator of size 75 mm height 90mm dia suitable for 1100 volts grade including galvanised mild steel strips, washers, insulators bolts, nuts complete all as specified and directed.

S & F aluminium conductor steel reinforced (ACSR) conductor of size 1 of 6/1 x 2.11mm (Squirrel) including binding, straining in LT over head line including all jumper connection and binding on insulator with new wire/aluminium tape including taking down old ACSR complete all as specified and directed.

S&F street light thermoplastic cable Junction box made of SMC/FRP of size 200x255x112mm, suitable to accomodate 2 Nos FRP insulator for taking connection of street light, IP-66, weather proof for outdoor use with TPN terminal and with MCB SPN, 6-32A, 10 KA, 'C' Curve, 01 No and connector terminal 4 pole indicating RYB Phase Colour and Neutral colour complete fixed to street light pole with suitable size of mild steel clamps, nuts & bolts complete all as specified and directed. (Make - Hensel, CAT No : KF 2525 or equivalent model of make as per list of manufacturer attached).

M&L for taking down old unserviceable bracket and provision of bracket on steel poles for fixing of street light fittings, bended to 45 degree angle, made out of 32/40mm dia GI pipe dedium grade, 1.2 mtr long fixed with and including 2 Nos MS clamps made from mild steel flat of size 40x5mm, bolt,nuts and washers including two coats of aluminium paint over a coat of zinc chromate primer complete all as specified.

S & F 40mm bore GI pipe "light grade" for protection & passing of LT cable fixed to poles/walls/laid under floor/roads complete including fittings, two coats of aluminium paint over a coat of zinc chromate primer complete all as specified.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, GI strips armoured cable for working voltage 1100 volts, 2 core, nominal cross sectional area of main conductor 16 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, culverts, under floors, through GI Pipe complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, GI strips armoured cable for working voltage 1100 volts, 2 core, nominal cross sectional area of main conductor 10 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, culverts, under floors, through GI Pipe complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, GI strips armoured cable for working voltage 1100 volts, 4 core, nominal cross sectional area of main conductor 10 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, culverts, under floors, through GI Pipe complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, GI strips armoured cable for working voltage 1100 volts, PVC insulated ,3 core with reduced neutral conductor (3 1/2 Core), nominal cross sectional area of main conductor 25 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, culverts, under floors, through GI Pipe complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, GI strips armoured cable for working voltage 1100 volts, PVC insulated ,4 core, nominal cross sectional area of main conductor 25 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, culverts, under floors, through GI Pipe complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, GI strips armoured cable for working voltage 1100 volts, PVC insulated ,3 core with reduced neutral conductor (3 1/2 Core), nominal cross sectional area of main conductor 95 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, culverts, under floors, through GI Pipe complete all as specified and as directed.

Material and labour for PVC insulated weather proof 3 core flexible multistranded copper conductor cable, 2.5 sqmm for connection of security / street light fitting from junction box including making proper connection using suitable size thimbles/lugs complete all as directed.

M&L, Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground (earth pit depth not less than 2.25m deep below the ground level) with top edge of earth plate at a depth not less than 1.5m below ground level connected to earth using GI earth wire of 6mm dia by means of of nuts, bolts and washer and check nuts of GI or steel as shown in electrical plate No.3 of MES SSR-2009 (Part-I) and connected to earth test point all as specified or indicated including testing on completion with and including 15mm bore light grade GI protection pipe 7.5 metre long for earth including PCC (1:2:4) pit with RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 6mm dia MS bars @ 100mm both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with 20mm dia light grade pipe, funnel, wire mesh, common salt chorcoal, necessary excavation and earth work in any type of soil complete all as specified.

Design, Fabrication, supply, installation, commissioning and testing Double Door Panel board manufactured from CPRI approved firm with canopy head, out door , cubical type panel board of over all min dimension 90 cm (L) X 60 cm (H) X 40 cm (W) fabricated with 3.0mm thick CRCA sheet on mild steel angle iron 50X50X6 mm thick frame, totally enclosed type dust & vermin proof back side open-able fixed with hinged shutter and front side open-able with hinged shutter and locking arrangement for individual MCCBs/MCBs , powder coated finished both internally and externally suitable for 415Volt AC 50 Hz 3 Phase 4 wire system by means of Alluminum bus bar of 250 Amps Capacity (Main bus bar ) and 350 Amps Loop Bus bar with coloured insulating tape/sleeves mounted on porcelain or synthetic insulators with provision for fixing MCCBs/MCBs necessary inter connections with Aluminium bar/strip duly coloured code insulation and providing under mentioned equipments & accessories including connections of all out going/in coming existing/New cables of required size and including PCC foundation in 1:3:6, type C1 of 0.5 mtrs height above GL and 0.30mtrs below GL including necessary earth work complete all as specified and as directed. (a) INCOMING: MCCB 4 pole, 63Amp,Icu=Ics=16KA, Adjustable thermal and adjustable Magnetic setting with extended terminals - 01No Make: L&T/Legrand/ ABB/Siemens/Havells (b) OUTGOING: MCCB 4 pole, 32Amp,Icu=Ics=16KA, Adjustable thermal and adjustable Magnetic setting with extended terminals - 01No Make: L&T/Legrand/ ABB/Siemens/Havells (c ) MCB TPN 32Amp, 10KA,C curve - 01 Nos . Make: Legrand cat No 408683 or equivalent model of L&T/ ABB/Siemens/Havells. (d) Indicating lamp LED type 240V 50 Hz AC -one set of 3 .Make: L&T/Legrand/ ABB/Siemens/Havells. (e) Astronomy time switch with 32 Amps capacity 3 pole contactor with auto manual switch - 01 set

Design, Fabrication, supply, installation, commissioning and testing Double Door Panel board manufactured from CPRI approved firm with canopy head, out door , cubical type panel board of over all min dimension 90 cm (L) X 45 cm (H) X 30 cm (W) fabricated with 3.0mm thick CRCA sheet on mild steel angle iron 45X45X6 mm thick frame and 4 Noslegs 60 cm high from GL , totally enclosed type dust & vermin proof back side open-able fixed with hinged shutter and front side open-able with hinged shutter and locking arrangement for individual MCCBs/MCBs , powder coated finished both internally and externally suitable for 415Volt AC 50 Hz 3 Phase 4 wire system by means of Alluminum bus bar of 150 Amps Capacity and providing under mentioned equipments & accessories including connections of all out going/in coming existing/New cables of required size and including PCC foundation in 1:3:6, type C1 of 0.5 mtrs height above GL and 0.30mtrs below GL including necessary earth work complete all as specified and as directed. (a) INCOMING: MCCB 4 pole, 100Amp,Icu=Ics= 25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals - 01No Make: L&T/Legrand/ ABB/Siemens/Havells (b) OUTGOING: MCCB 4 pole, 63Amp,Icu=Ics=16KA, Adjustable thermal and adjustable Magnetic setting with extended terminals - 01No Make: L&T/Legrand/ ABB/Siemens/Havells (c ) MCB SPN 10Amp, 10KA,C curve - 02 Nos . Make: Legrand or equivalent model of L&T/ ABB/Siemens/Havells. (d) Indicating lamp (RYB) LED type 240V 50 Hz AC -one set of 3 .Make: L&T/Legrand/ ABB/Siemens/Havells. (e) Bus bar with electrolite aluminium bus bar with heat shrinkable insulating sleeves of capacity 150 Amps, 4 Nos of required length supported on FRP insulators including all internal wiring using multistranded copper conductor cable. (f) Star delta starter suitable for / upto 7.5 HP motor in built fully automatic - 2 Nos. Make Havells/L&T/ABB

Fabrication, supply, installation, commissioning and testing LT joint box/ Junction box with canopy head, out door of over all min dimension 100 cm (L) X 50 cm (W) X 80 cm (H) fabricated with 3.0mm thick CRCA sheet on mild steel angle iron 45X45X6 mm thick frame and fixed on 50 cm high PCC platform totally enclosed type dust & vermin proof front side open-able with hinged shutter and locking arrangement 440Volt 3 Phase & neutral including Alluminum bus bar of 200 Amps Capacity including PCC foundation in 1:3:6, type C1 of 0.5 mtrs height above GL and 0.30mtrs below GL complete all as directed by the Eng in charge.

Taking up or down old GI water mains up to 50mm dia (including all fittings), with spigot and socket ends including cleaning serviceable pipe and stacking at site properly for reuse all specified and directed by engr-in-charge at site. Note : Earth work shall be measured and paid seperately under relevant item.

Taking up or down old GI water mains 80 & 100mm dia (including all fittings), with spigot and socket ends including cleaning serviceable pipe and stacking at site properly for reuse all specified and directed by engr-in-charge at site. Note : Earth work shall be measured and paid seperately under relevant item.

Relaying/refixing of old serviceable steel water tubing and connection in new or old position including necessary cuttings, threading and providing new fittings such as bends, elbows, sockets, nipples, tappers and reducers etc and testing on completion complete all as directed for 20 mm bore pipe Note :- (i) Excavation and earth work will be measured and paid separately. (b) Old serviceable water tubing retrieved under item No 38 & 39 above shall be used.

All as per item No 40 above but for 25 mm bore pipe.

All as per item No 40 above but for 50 mm bore pipe.

All as per item No 40 above but for 80 mm bore pipe.

All as per item No 40 above but for 100 mm bore pipe.

Supply and laying GI water tubing 80 mm bore "medium grade" including all fittings to laid in trenches including necessary cuttings, threading and testing on completion all as specified and directed by Engr-in-Charge.

All as per item No 45 above but for 50 mm bore pipe.

All as per item No 45 above but for 25 mm bore pipe.

All as per item No 45 above but for 20 mm bore pipe.

Supply and Laying Ductile iron socket & spigot pipes, conforming to IS-8329-2000 class K-9 100 mm bore dia in size, any length laid in trenches including testing on completion and including taking out old pipes any size. Note : (i) Lead joint for fixing fittings & excavation and earthwork will be measured and paid separately. (ii) CI/Ductile iron specials measured and paid separately .Make - Electro steel/TATA.

Supply and fixing Ball valves (float valve) high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm bore dia.(minimum weight 210 gms).

Supply and fixing Ball valves (float valve) high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of size 25 mm bore dia. (minimum weight 455 gms).

Supply and fix Gun - metal gate valve 20mm bore, vertical/horizontal type with ISI marked and fixed with suitable size of union as directed. Make: KIRLOSKAR/LEADER/ ZOLOTO

Supply and fix Gun - metal gate valve 25mm bore, vertical/horizontal type with ISI marked and fixed with suitable size of union as directed. Make: KIRLOSKAR/LEADER/ ZOLOTO

Supply and fix Gun - metal gate valve 40mm bore, vertical/horizontal type with ISI marked and fixed with suitable size of union as directed. Make: KIRLOSKAR/LEADER/ ZOLOTO

S & F 50mm dia Gun-metal, globe or gate valve ISI marked with iron wheel head, screwed at both ends for iron pipes Make: KIRLOSKAR/LEADER/ ZOLOTO

Taking out/burning out of leaking and damaged lead joints in position from the existing CI mains including removing the old lead carefully with out damaging to the pipe complete for 80mm bore pipes Note : Excavation and earth work will be measured and paid separately.

All as per item No 56 above but for 100 mm bore pipe.

Material and labour for run lead joints including jointing materials such as spun yarn etc complete for 80 mm bore pipes. Note : Any excavation and earth work involve will be measured and paid separately.

All as per item No 58 above but for 100 mm bore pipe.

Material and labour for lead wool joints including jointing materials etc complete for 80 mm bore pipes. Note : Excavation and earth work will be measured and paid separately.

All as per item No 60 above but for 100 mm bore pipe.

Drilling and tapping from cast iron water mains (in position) for branch connections of 25mm internal dia.

Drilling and tapping from cast iron water mains (in position) for branch connections of 20mm internal dia.

Supply only cast iron foot valve 100 mm dia complete with necessary bolts, nuts, washers all as directed.

Supply only pocket type chlorine test kit .Make RMCO or its equivalent make approved by GE.

Supply and fix medium grade collar for lowering galvanised iron pipe of size 50 mm dia lowering into bore well all as directed.

Mild steel plain black sheet cut to size required, bending, turning, welding to steel frame work in valve pit etc complete all as directed.

Material and labour for preparation of old surfaces of steel area over 10 cm in width or grith (ie inside & outside surfaces of valve pit cover) by removing foreign particles, cleaning the surfaces thoroughly and completely dried up then applying one coat of black bituminous paint complete all as directed. otherwise descriped and all as directed.

Material and labour for preparation of new surfaces of steel area over 10 cm in width or grith (ie inside & outside surfaces of valve pit cover) and applying two coats of black bituminous paint over a coat of red oxide zinc chrome primer complete all as directed. otherwise descriped and all as directed.

S&F rotational moulded polyethylene water storage tanks 2000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia brass ball/float valve high pressure with polythene float and flynut, 20 mm water tank nipple, union suitable for HDPE water tank, 20mm bore gun metal gate/globe valve with iron wheel head complete all as specified and directed. Make: Sintex/ Polycon/ Rolex.

Supply, install, commissioning and testing of centrifugal pump set, 440V, 3 phase, 50 cycle, 37 metre head, 416 LPM directly coupled with electric motor of suitable capacity (3 HP min) with necessary cast iron foot valve, mounted on and including providing PCC 1:3:6 , type C1 foundation of size 1.00X1.00X1.00 metre necessary earth work including suitable pump motor cover made out of 2 mm thick MS sheet, providing suitable capacity pump starter complete all as directed. Make: Kirloskar/ CG/ KSB/ Jyoti.

Supply and fixing cast iron body 80 mm dia butterfly valve internally moulded, wafer type, PN - 10, including all acessories complete all as directed. Make: Zoloto/ L&T/ Kirlosker.

S&F Cast iron heavy duty sluice valve conforming to IS-14846 class PN 1.6, ISI marked, with flanged end and drill hole with non raising high tensile brass spindle and iron wheel, long service life and leak-tightness even after 1000 open/close cycles including jointing materials viz rubber gasket 3mm thick, bolts, nuts and washers complete suitable for 100 mm bore pipe testing after installation of sluice valve Make: Kirloskar/Zoloto/Venus.

Supply and fixing cast iron non return valve 100 mm dia with by pass arrangement complete with necessary bolts, nuts, washers all as directed. Make: Kirloskar/Zoloto/Venus.

Supply, install, lowering into bore well,testing and commissioning electric driven Non clog vertical submersible sewage pump set, having pumping capacity 600 LPM at 40 Mtrs head (7.5 HP, 415 Volts, 50 Hz) suitable to pass 40mm size particles with chromium plated steel impeller and cutter, guaide rail and lifting chain necessary priming pipe connection with valve, earthing connection complete including consisting of following acessories :- (a) Double bi-directional mechanical seal with silicon carbide face for long service life. (b) Lateral cable entry to avoid transport and installation damage and having resin filled triple protection cable assembly to avoid leakage in the motor in the event of damage of cable. (c ) Submersible cable three core 50 metre long two runs of required size from non clogging submersible pump set to starter. Make: Kirloskar / KSB/CG/CALAMA.

RAMSON TRADERS

Chandana Enterprises

Charms Engineers Inc

Shiva Shakthi Electrical Enterprises