ADDN/ALTN TO LADIES WASHROOM, PROVN OF SHED IN P-78, SPL REP TO BLDG. NO. P-78 AND CERTAIN MINOR WORK UNDER GE AF STN GORAKHPUR.

Amount

Demolition of brickwork built in cement mortar including quoins, arches, pillar etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:6, and finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:4, and finishing the surface even and smooth by using water proofing compound without using extra cement, complete all as specified and directed (WPC should be paid separetally).

M & L for 5mm thick renderinag in CM 1:3 in over concrete surfaces as in ceiling, complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats oil bound distemper over one coat of primer over 1mm thick birla white wall care putty complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying two coats of white wash on wall complete all as specified and directed.

M&L for preparation of new surface of wall and applying three coat of white wash complete all as specified and as directed.

M & L for preparation of new platered surfac of ceiling and applying three coat of white wash, complete all as specified and directed.

M & L for preparation of old platered surface of ceiling and applying one coat of white wash, complete all as specified and directed.

M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up Resistance of Asian Paints Ltd or its equivalent with low VOC less than 50 , Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat and allow 6-8 hrs to dry the surface in both the coats of paint with 4 years performance warranty from Manufacture and instructions complete all as directed.

M&L for preparation of old surfaces of steel and applying one coat of synthetic enamel paint complete.

Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor,wall, aprons etc complete all as specified and directed.

M&L double charged full body vitrified coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including laying of screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete, complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified.

Demolition of cement concrete in ground floors and paving n. exc 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection finished surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 75mm thickcement concrete 1:2:4 type B-2 using 20 mm graded stone as in flooring or in sub base etc complete all as specified and as directed.

Dismantling wall and ceililing boards (fibre, pulp, insulation etc. ) or insulation boards/ slabs/ blankets, any thickness, including cover fiilets complete all as specified and directed.

M&L in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed.

Dismantling of brick tiles any thickness laid, bedded and pointed in any mortar from roof including removal of old tarfelt (cost of necessary scafolding and removal of the material obtained from site to outside the premises deemed to be included in the rate), complete all as specified and directed.

Roughening surfaces of old concrete roof by iron brush and picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0 Kg of cement per Sqm, complete all as specified and directed.

M&L for 15mm thick rendering on roof surface of mortar in CM 1:4, using Liquid Water Proofing Compound as per manufacturer's instruction, laid in roof (WPC shall be paid separately), complete all as specified and directed.

M&L for priming roof surfaces and applying a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm except felt and laying APP based polymeric membrane with 100mm side laps/end laps and minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) over roof surfaces by force application, complete all as specified and directed.

M&L 20mm thick concrete tiles laid on cement mortar 1:6 and grouted flush in CM (1:3), mixed with 5% of crude oil by weight og cement on 15mm thick screed bed complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in roof kerbs etc rounded or chamfered on edges, complete all as specified and directed.

Excavation in post holes ( or similar holes) in soft/loose soil each n. exc 0.50 Cum getting out, watering and removing surplus soil to a distance n. exc 50 m and making good surface complete all as specified and directed.

M&L for PCC 1;2:4 type B1 using 20mm gragded stone aggregate for post hole

S&F Steel work in tublar (Square, rectangular or pipe) designer trusses including post and strut, perlin etc with special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240, complete all as specified and directed.

S&F pre-painted FRP (Fibre Reinforced Plastic) sheet (corrugated, semi-corrugated or plain) 3.00mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed.

M&L for preparing new surfaces of iron and iron based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, of any radius provided without access door, complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats oil bound distemper over and including 1mm thick birla white wall care putty complete all as specified and as directed.

Taking down chowkat or frames not exc. 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified and directed.

Taking down chowkats with shutters exceeding 1.5 Sqm but n. exc 4 sqm each ( without takig off shutters from the frames), complete all as specified and directed.

Providing and fixing factory made uPVC Natural Oak/Golden Oak colour powder coated door, with frame made of extruded profiles. Profiles of frames 1.6+/-2mm thick glavanized mild steel and sash will be miltered cut and fusion welded at all corners, including dirilling of holes for fixing hardware and darainage of water etc. making arrangement for fixing of hardware, EPDM gasket, 1.2+0.2mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mmx100mm long fasteners, alll complete and as directed, Note: glazing, hardware hinges and fitting, EPDM rubber gasked etc not be paid separetely) including touch lock with hook, zinc allow body with single nyylon rollers (weght bearing capacity to be 40 Kg) After fixing the frame the gap between frame and adjascent finish wall shall be filled with eatlerh proof silicon sealed over bracket rod of requireed size and approved quality, Make: fenesta or equivalent, complete all as specified & directed.

M&L Non-skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including laying of screed bed or bedding layer of mortar 15mm thick in cm 1:6, complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350 x250 x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles including rendering 10 mm thick on faces of brick or concrete surfaces in cm 1:3 complete all as specified and directed.

M&L double charged vitrified coloured dark shade tiles 10mm thick ( square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.0 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including laying of screed bed or bedding layer of mortar 15mm thick in cm 1:6, complete all as specified and directed.

M&L for 20mm thick granite stone (any type of work) in steps, jambs, pillars, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for chamfers, splays or arris of granite in face work exc. 15mm but n. exc 50 mm wide complete all as specified and as directed.

Taiking up or down steel tubing and connections, 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm bore complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubings, cutting not exceeding 10cm girth, complete all as specified and directed.

M&L for GI tubing 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for GI tubing 20 mm bore 'medium grade' galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F table top oval type fancy type wash basin, Vitreous China white flat back of size 550x400mm including 32mm bore Chromium plated waste fitting but excluding taps, complete all as specified and ditected Make: Jaquar/Kohlar/hindware.

S&F in repairs bottle trap of PTMT having minimum water seal of 25mm (min weight 32mm-260gms/ 40mm 270gms), complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia 600 mm long, fixed complete all as specified and as directed Make: Jaquar/Kohlar/hindware..

Taking down rain water / vent pipe of any description including fittings etc. including removal to store, complete all specified and directed.

M&L for 75mm bore PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. (concrete to be measured seperately), complete all as specified and directed.

Supply and fix in repairs cast copper alloy chromium plated fancy type angle cock, of 15 mm bore complete all as specified and directed Make: Jaquar/Kohlar/hindware.

S&F in repairs fancy type, chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed Make: Jaquar/Kohlar/hindware.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 15 mm bore basin mixture fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered ' Hot' or 'Cold' with long screw shanks screwed for iron pipe or union, complete all as specified and directed. Make: Jaquar/Kohlar/hindware.

Demolition of reinforced cement concrete in roofs, beams, staircase, lintels, chajja, RCC OHT etc, complete all as specified and directed.

M&L reinforced cement concrete (nominal mix) type B1 1:2:4 (20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, copies, deck slabs and in shelves including necessary form work, complete all as specified and directed.

Use and waste of form work (flat) to rough finished surfacesides and soffits of floor and roof beams, cantilevers, shelves etc, complete all specified and directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all specified and directed.

M&L for preparation of ground by spreading of vermicompost and good earth as required thickness including creating mounds in different levels for plantation, complete all as specified and directed.

M&L for chequered cement concrete tiles size 30cmx30cmx25mm thick laying on 30mm thick sand cusion for garden, colour and design approved by Garrision engineer, complete all as specified and directed.

Supply only white sand, complete all as specified and directed.

M&L for chequered cement concrete tiles size 30cmx30cmx25mm thick set jointed and pointed in neat cement slurry in floors on 20 mm thich CM 1:6 with gre cement and no pigments colour and design approved by Garrision engineer, complete all as specified and directed.

Supply and stacking of vermiculture compost, complete all as specified and directed.

Supply and stacking, leveling and spreading of soil, complete all as specified and directed.

Supply and plantation of specimen and special plants of Royal palm (7' to 8' height) having 25 to 30 leaves, complete all as specified and directed.

Supply and install and testing built-in inverter type split air conditioner of capacity 1.5 Ton, BEE 5 star rating, for working on 230 volt, SP, 50 Hz supply complete including cutting of existing wall and proper fixing making good disturbed surface with existing surface if required and providing water pipe upto ground level and copper tubing up to 7.5 Mtr connecting inner unit with outer unit of AC complete all as specified and directed.Make: Carrier/Voltas/Bluestar/Hitachi/LG

S&F automatic voltage stabilizer for low and high voltage correction equipped with clectronic transistorized relay suitable for operation single phase, Ac, 50 Hz complete with voltmeter, indicators and designed for input voltage 90 to 300 stabilized between 215 V to 220 v with accuracy of + 2.5% of capacity 4 KVA (Not less than 17 Amp) complete all as specified and directed at site.

S&F MCB, SPN, 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 6 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 6 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 6 sqmm conductor cable, 1 No 6 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

sanjay enterprises

M/S SHAILZA TRADERS

M/s Mahendra Construction

M/S NATIONAL ELECTRIC WORKS

RVRconstructon

M/S DEEKSHA CONSTRUCTION

M/S RAJEEV KUMAR