REPAIRS TO JOINERY INCLUDING DOORS WINDOWS VENTILATORS ETC IN TECHNICAL AREA ATCVRDE AVADI

Amount

Notes for BOQ items:- 1. Contractor is required to deploy the Tradesman & helper daily (except holiday & Sunday) as under:- (a) One Carpenter with One helper for all carpentry related items including Aluminium joinery and steel joinery of Sch ‘A’. All the trandesman shall be available at MES service centre at Bharatiyar Nagar from 0830 Hours to 1630 Hours on all days. The rates quoted by contractor shall deemed to be include this aspect. In case, if the contractor fails to employ the above persons, a recovery of Rs 700/- per tradesman per day and Rs 400/- per helper per day will be deducted from the payments due to him. Contractor shall produce attendance register of tradesman at the time of RAR payment duly signed by AGE. 2. Attendance register alongwith details of complaint to monitor the arrival and departure of tradesman shall be maintained by JE-in-Charge and signed by the contractor on daily basis. 3. The tradesman employed by the contractor shall have experience in their trades. The contactor will get the names of tradesman approved from Engr-in-Charge. The accepting officer reserves the right to reject the employment of such person forthwith. No claim what-so ever be entertained on this regard.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m with shutters (without taking off shutters from the frame) each all as specified and directed by Engineer-in-Charge.

Taking down Chowkhats or frames n.exc 1.5 sq. m with shutters (without taking off shutters from the frame) each all as specified and directed by Engineer-in-Charge.

Taking down shutters exc 1 sq. m and n exc 2 sq. m all as specified and directed by Engineer-in-Charge.

Refixing shutters in same opening of any description of area exc 1 Sqm but n.exc 2 Sqm each all as specified and directed by Engineer-in-Charge.

S&F 2nd class HW plain solid straight chowkhat and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed by Engineer-in-Charge.

S& F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides face is covered with deco rative face veneer with lipping/frame to match all as specified and directed by Engineer-in-Charge.

S& F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type all as specified and directed by Engineer-in-Charge.

S&F Glazed and skeleton shutters 30mm thick of 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed by Engineer-in-Charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and directed by Engineer-in-Charge.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per pecification & drawing all as specified and directed by Engineer-in-Charge.

Taking down existing windows/ventilators complete all as specified and directed all as specified and directed by Engineer-in-Charge.

S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, devetailed or welded all as specified and directed by Engineer-in-Charge.

S&F Alumnium powder coated sections made out of hallow/solid extruded aluminium section (minimum thickness of powder coating 50 micron) for openable windows/sliding windows/ventilators/door shutter with all types of frames with one or more rebates including joining cleats, beads for fixing etc complete all as specified and as directed & approved by Engineer-in-Charge. (glass/wiremesh shall be measured and paid separately)

S&F tinted glass 5.5mm thick fixed with glazing clip, rubber beading /gasket in squares in each pane all as specified and directed by Engineer-in-Charge.

S&F tinted glass 5.5mm thick fixed in repairs with glazing clip, rubber beading /gasket in squares in each pane all as specified and directed by Engineer-in-Charge.

S&F Alumnium powder coated louvers (movable arrangement in pair) for ventilators including locking arrangement complete all as specified and directed by Engineer-in-Charge.

S&F Alumnium powder coated louvers (movable arrangement in pair) for ventilators including locking arrangement complete fixed in repair all as specified and directed by Engineer-in-Charge.

S&F Figured glass, pin headed type 4mm thick fixed to aluminium lovers in strips width not exceeding 80mm all as specified and directed by Engineer-in-Charge.

S&F Figured glass, pin headed type 4mm thick fixed in repair to aluminium lovers in strips width not exceeding 80mm all as specified and directed by Engineer-in-Charge.

S&F 300mm long aluminium anoised sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet cast or extruded section and fixing both and sliding boths of external section or cast alumnium aloy and fixed all as specified and directed by Engineer-in-Charge.

S&F 200mm Aluminium anodized barrel tower bolts of extruded section and fixed all as specified and directed by Engineer-in-Charge.

S&F Aluminium handle cast type anodized of size 150mm long all as specified and directed by Engineer-in-Charge.

S&F SS Butt hinges,100 mm, medium weight, cold rolled mild steel, and fixed all as specified and directed by Engineer-in-Charge.

S&F 25 x 6 mm flat iron for hold fast confirming to Fe-290 Gde E-165 all as specified and directed by Engineer-in-Charge.

S&F in repairs 300mm long aluminium anoised sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet cast or extruded section and fixing both and sliding boths of external section or cast alumnium aloy and fixed all as specified and directed by Engineer-in-Charge.

S&F in repairs 200mm Aluminium anodized barrel tower bolts of extruded section and fixed all as specified and directed by Engineer-in-Charge.

S&F in repairs Aluminium handle cast type anodized of size 150mm long all as specified and directed by Engineer-in-Charge.

M&L for preparing new wooden surfaces and two coats of synthetic enamel paints over a coat of pink primer all as specified and directed by Engineer-in-Charge.

Taking down cement plastering of any description scrubbing down with water washing down etc. all as specified and directed by Engineer-in-Charge.

Rendering 15mm thick CM 1:4 on fair face of brick walls or concrete surface finished fair and even all as specified and directed by Engineer-in-Charge.

M&L for prepration of new plastered surface and applying three coats of white wash on walls all as specified and directed by Engineer-in-Charge.

Hacking out old broken glasses any thickness size , quality, description from metal frame including punching or drilling out old glazing pins /spring clips etc all as specified and directed by Engineer-in-Charge.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty and cilips in squares n. exc 0.5 sqm each pane all as specified and directed by Engineer-in-Charge.

M&L for Securing glass of any description in existing metal frames glazed with putty including removing loose or decayed putty, painting/oiling one coat on rebates, grooves, reputtying incl pins and painting/oiling puttied surface to match existing work all as specified and directed by Engineer-in-Charge.(New lengthof frame reputted shall be measured)

M&L for preparing of steel surface and painting 2 coats of synthetic enamel paints over a coat of red oxide primer all as specified and directed by Engineer-in-Charge.

Dismantling boarding any description fixed in any position with nails all as specified and directed by Engineer-in-Charge.

M&L providing and fixing calcium slicate board 12mm thick in ceiling fixed with screw as per manufacture's instructions and S&F powder coated aluminium snap grid frame work for false ceiling size of grid 605 x 605 mm with 6mm dia GI adjusting rod upto 600mm length fixed to purlin/rafters by means of ceiling cleats/ fastners with GI flat 40 x 3mm size 60mm long complete all as specified and directed by Engineer-in-Charge.

M&L Door closser hydraulically regulated aluminium body fixed suitable for doors all as specified and directed by Engineer-in-Charge.

M&L Door closser hydraulically regulated aluminium body fixed in repairs suitable for doors all as specified and directed by Engineer-in-Charge.

M&L double action floor spring hydaulically regulated made up of aluminium alloy sheet foundation box main body with stainless steel cover governig pivot made of brass complete fixed to floor including remooval of existing old floor spring copleteall as specified and directed by Engineer-in-Charge.

Prelaminated particle board interior grade 9mm thick with decorative choice lamination on both side all as specified and directed by Engineer-in-Charge.

Repairs to existing aluminium doors by making adjustments in members to make them smooth functionable including necessary opening of parts, grinding, cutting,fixing of cleats, hinges, rubber beads, rollers, screws, adjustment of door closer etc. complete all as directed by Engineer-in-Charge

Repairs to existing aluminium windows by making adjustments in members to make them smooth functionable including necessary opening of parts, grinding, cutting,fixing of cleats, hinges, rubber beads, rollers, screws etc. complete all as directed by Engineer-in-Charge

S&F in repairs powder coated glazed aluminium partion with aluminium sections of minimum 2mm thickness and pannel not exceeding area of 1.50 Sqm including necessary joining cleats glainy clips, rubber neoprene packing, beading screw, etc including necessary drilling in walls, floor & celing complete all as specified and directed by Engr-in-charge

S&F brass mortice lock four lever 100mm with key in duplicate all as specified and directed by Engineer-in-Charge.

S&F brass mortice lock four lever 100mm with key in duplicate in repairs all as specified and directed by Engineer-in-Charge.

M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coat all as specified and directed by Engineer-in-Charge.

S&F mild steel framed work such as grills, ladder, framed baluster walkways, railing etc and conforming to Fe 290Gde -E-165 incl necessary cutting, weldingetc to match with existing complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed by Engineer-in-Charge.

S&F in repairs Harrison rails, 20 mm thick, mild steel pipe with PVC coating with fixing brackets, stops, rollers etc all as specified and directed by Engineer-in-Charge.

S&F Prelaminated particle board 12mm thick, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed in repairs with screws to timber frame work complete all as specified and directed by Engineer-in-Charge.

S&F Plywood 3mm thick, grade BWR, type BB, fixed with screws to timbe frame work all as specified and directed by Engineer-in-Charge.

S&F in repairs Perforated particle board or tiles 12 mm thick for insulation and accoustic purposes of size 600x600mm or 605x605mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Solid PVC wall panelling 5mm thick Prelam PVC sheet on one side including necessary fixing arrangement and beadings complete as per manufacture instruction all as specified and directed by Engineer-in-Charge. Make: Rajashri / Sintax / Prayag. Note: Texture and pattern of wall panel shall as approved by AGE (I).

S&F in repairs Venetian blinds of approved make vertical type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc and necessary fittings complete all as specified and directed by Engineer-in-Charge. Note: Texture and pattern of Venetian blind shall as approved by AGE (I).

k.Pandurangan

K Kumar Construction