PROVN OF 2 X UPS 20 KVA AT COMN COMPLEX OF HQ 101 AREA AT FCSR AND PROVN OF GEYSERS 25 LTRS AND SANITARY FITTINGS AT 58 GTC (60 NOS) AND PROVN OF EXHAUST FANS (HEAVY DUTY) AT BLDG NO A 117 AND COOK HOUSES AT 58 GTC AND SPL REPAIR FOR REPLACEMENT OF B

Amount

Supply,install, testing and commissioning of 75 HP centrifugal pumping set of AC, 3 phase, 415 volt, 50Hz, head-100 mtr,Discharge 2000 LPM, RPM 1480 complete all as specified and as directed Make Kirloskar / crompton

Supply,install, testing and commissioning of 7.5 HP centrifugal pumping set of AC, 3 phase, 415 volt, 50Hz head-70 Mtr , Discharge 250 LPM , RPM-1485 complete all as specified and as directed Make Kirloskar / crompton .

Supply,install, testing and commissioning of 40 HP centrifugal pumping set of AC, 3 phase, 415 volt, 50Hz head 70 mtr, Discharge 1500 LPM,RPM -1475 complete all as specified and as directed Make Kirloskar / crompton .

Supply,install, testing and commissioning of 5 HP head -25 m , discharge -450 LPM, 1500 RPM centrifugal pumping set 3 phase , AC, 415 Volt, 50 Hz and PCC foundation complete all as specified and as directed. Make-Crompton cat No-MIK52-39 or equivalent Make Kirloskar / crompton

Supply,install, testing and commissioning of 3 HP head -15 m , Discharge - 450 LPM, 1500 RPM centrifugal pumping set 3 phase , AC, 415 Volt, 50 Hz and PCC foundation complete all as specified and as directed. Make-Crompton cat No-MIK32-27 or equivalent Make Kirloskar / crompton

Supply and fixing star delta starter fully automatic Suitable for 415 Volts AC , 75 HP capacity complete all as specified and as directed.Make- Havells or L &T or Legrand

Supply and fixing star delta starter fully automatic Suitable for 415 Volts AC , 50 HP capacity complete all as specified and as directed.Make- Havells or L &T or Legrand

Supply and fixing DOL starter Suitable for 415 Volts AC ,7.50 HP capacity complete all as specified and as directed.Make- Havells or L &T or Legrand

Supply and fixing DOL starter Suitable for 415 Volts AC ,3-5 HP capacity complete all as specified and as directed.Make- Havells or L &T or Legrand

M& l for PCC 1:3:6 type C2 (40 mm grade stone grade aggregate) for making good disturbed surface of channels/pavements/foot paths/roads/foundation etc complete all as directed and specified

Material and labour for earthing complete with copper earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised copper earth strip of size 32X6 mm by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as directed and specified

Material and labour for earthing complete with copper earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised copper earth lead wire 4.0 mm by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as directed and specified

Material and labour for sub main wiring with two single core 25 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH, ISI marked , PVC multistranded copper conductor cable of size 25 sqmm green colour as earth lead including PVC casing capping of suitable size including taking down old one complete all as specfied and directed.

Material and labour for sub main wiring with two single core 16 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH, ISI marked , PVC multistranded copper conductor cable of size 16 sqmm green colour as earth lead including PVC casing capping of suitable size including taking down old one complete all as specfied and directed.

Material and labour for sub main wiring with two single core 10 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH, ISI marked , PVC multistranded copper conductor cable of size 10 sqmm green colour as earth lead including PVC casing capping of suitable size including taking down old one complete all as specfied and directed.

S&F in replacement Bronze vertical check valve or foot valve conforming to IS-4038 of pipe size 50 mm dia including taking out old unserviceable foot valve from the sump complete all as specified and as directed. Make- Zoloto or Kirloskar or Upadhayay

S&F in replacement CI foot valve conforming to IS-4038 of pipe size 150 mm dia including taking out old unserviceable foot valve from the sump complete all as specified and as directed. Make- Upadhaya/Zoloto/Kirloskar.

S&F in replacement CI foot valve conforming to IS-4038 of pipe size 100 mm dia including taking out old unserviceable foot valve from the sump complete all as specified and as directed. Make- Upadhaya/Zoloto/Kirloskar.

S & F non return valve 100 mm cast iron with by pass arrangement complete all as specified and as directed. Make-Zoloto or Equivalent make

S & F sluice valve 100 mm cast iron flanged of class 1.6 PN complete all as specified and as directed.Make- ZOLOTO or BIR or Upadhayay

S & F sluice valve 150 mm cast iron flanged of class 1.6 PN complete all as specified and as directed.Make- ZOLOTO or BIR or Upadhayay

S & F Gun metal Gate valve or Stop valve 50 mm dia with iron wheel head screwed both ends for iron pipe ,by pass arrangement complete all as specified and as directed.

S & F Gun metal Gate valve or Stop valve 40 mm dia with iron wheel head screwed both ends for iron pipe ,by pass arrangement complete all as specified and as directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS IS 694 cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) drawn through casing caping with all fittings including plastic laminated sheet cover for mounting switch sockets and drawing continuous earth wire with PVC insulated unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) connected to earth dolly complete all as specified and as directed by Engr-in-Charge.

S&F of switch piano flush type 5 amps single pole one way complete one light/fan point controlled by one switch all as specified and directed by Engr-in-Charge

S & F ceiling rose surface type 65 mm x 50 mm, 2 to 3 terminal complete all as specified and as directed by Engr-in-Charge

Supplying, fixing and testing of exhaust fan AC single phase 230 volts , 450mm sweep, 960 RPM heavy duty copper winding made of steel body complete with louvers shutter complete all as specified and directed by Engr-in-Charge. Make Orient/Havells/Bajaj/Crompton

M & L for cutting of circular holes at any type of wall suitable size for fixing of exhaust fan of size 150 mm sweep grouting 04 Nos 100 mm long 12 mm dia stud bolt including make good disturbed surfaces of wall and colour wash for match as per existing all as specified and as directede by Engr-in-Charge

Material & Labour for sub main wiring with two single core 2.5 sqmm , FRLS, ISI marked PVC Insulated unsheathed multistranded copper cable, and one single core unsheathed FRLSH, ISI marked, PVC insulated multistranded copper conductor cable of size 2.5 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed.

S&F switch socket combination, 5A/16A 5 in 1 complete inclusive all necessary fixing arrangements and all incoming and outgoing electric connection and testing for entire satisfaction of Engr-in-Charge

Supply fixing & testing of storage type water heater of capacity 25 Ltrs, Vertical type, wall mounted, electrically operated, single phase, copper inner tank and heating element up to 2 KW, BEE 5 star rated including PVC conneciton pipe complete all as specified and directed. Make- Crompton Cat No-ASWH-3525, and equivallent make Usha or Havells.

Supply and fix GI tubing 15mm dia medium grade complete incusive threading,elbow, socket, socket reducer, Nippal and all incoming and outgoing water connection from existing pipe line 20/25mm dia and testing for entire satisfaction for Engr-in-Charge.

Supply and fix GI tubing 20 mm dia medium grade complete incusive threading,elbow, socket, socket reducer, Nippal and all incoming and outgoing water connection from existing pipe line 20/25mm dia and testing for entire satisfaction for Engr-in-Charge.

Supply and fix stop cock, 15 mm, cast copper alloy cromium plated fancy type and testing for entire satisfaction for Engr-in-Charge

Supply and fix bib tap 15 mm dia, outer thread, cst copper alloy chromium plated complete inclusive 15mm dia GI socket and all incoming water connection and testing for entire satisfaction for Engr-in-Charge

Supply installation and testing commissioning of UPS 20 KVA, IGBT Power device pulse with modulation technology, Air cooled, 3 phase , 415 volt , AC of input voltage range 380-470 volts, 50 HZ, output voltage of 415 volt +/-1% over all efficiency 90% with suitable No of sealed maint free batteries as per OEM recommendation with 60 min backup, required 32000 VAH, inbuilt battery charger of constant voltage and constant current , IGBT rectiifer , mannual / maintenance bypass , Input and output MCBs ,batteries current limitation protection, overload protection, short circuit protection , torch screen LCD Display with information of input voltage, current , output voltage , current , battery voltage , battery charge / discharge current, auditable Alarm with all indications, as per ISO 9001 and 14001 complete all as specified and directed Make Luminous / Microtek / Schneider Elect.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specified and directed.

M/s S L Wankhar