PROVISION OF CYCLE / SCOOTER PARKING SHED

Amount

Surface excavation not exceeding 30cm deep and average 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 metre wide for wall foundation, cable etc or for manholes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each layer in soft/loose soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 metre above the starting point complete all as specified and directed.

Removing excavated surplus soil to a distance exceeding 250 metre and not exceeding 500 metre, depositing where directed at level not exceeding 1.5 metre above the starting point complete all as specified and directed.

Material and labour hard core of gauge not exceeding 63mm, deposited, spread and levelling in layers not exceeding 15 cm thick, watered and rammed to true surface complete all as specified and directed.

Supply and lay river bed sand for sand cushioning for cables 8 cm below the cable and 15cm above the cable all as specified and directed.

Providing plain cement concrete 1:5:10, type E-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and directed.

Providing plain cement concrete 1 :4 : 8, type D-2, using 40 mm graded crushed stone aggregate as in foundations, filling, mass concrete, etc complete all as specified and directed.

Providing plain cement concrete 1 :2 : 4, type B-1, (using 20 mm graded crushed stone aggregate) as in foundations, filling, and mass concrete etc complete all as specified and directed.

Material and labour brick work using sub class 'B' bricks (old size bricks) built in cement and sand mortar (1:6) straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

Supply and lay sub class ‘B’ bricks (old Size), common burnt clay building bricks for cable protection laid length wise perpendicular to the axis of cable, abutting each other gap should not be more than 10mm complete all as specified and directed.

Supply and fix mild steel tubular section as in post / column / strut etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.

Supply and fix Mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410 - W (Gde E-250) quality A complete all as specified and directed.

Supply and fix for plates (plain or chequered) channels, square cut or notched (rodinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe 410-W (Gde E-250 quality-B) etc complete all as specified and directed.

Supply and fix 12mm dia mild steel screw bolts not exceeding 5cm long (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed.

Supply and fix 16mm dia mild steel screw bolts exceeding 22.5 cm and not exceeding 30 cm long (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and directed.

Material and labour 100mm thick plain cement concrete type B-1 (20mm graded aggregate) laid in alternate bays as in flooring surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour 100mm thick plain cement concrete 1:2:4 type B-2, (Using 40mm graded crushed stone aggregate) as floor finished finished concrete surface with spike rolling or making impression of expanded metal whilst the concrete is green complete all as specified and directed.

Material and labour 75 mm thick plain cement concrete (1:3:6) type C-2 , using 40 mm graded crushed stone aggregate as in plinth protection laid in alternate panel not exceeding 3 metre surface shall be finished even and fair complete all as specified and directed.

Material and labour 15mm thick rendering in cement and sand mortar (1:4) on fair faces of brick work / concrete surfaces finished even and fair complete all as specified and directed.

Material and labour preparing new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

Material and labour preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply, laying, jointing and testing 50 mm bore dia galvanised iron tubes light grade with all fittings, laid in trenches or passing through cables under the floor or along the pole etc complete all as specified and directed.

Material and labour point wiring complete with 1.5 Sq mm, single core PVC insulated PVC unsheathed multi-stranded copper conductor FRLS cable 1100 volts grade laid/drawn through and including rigid PVC conduit pipe (minimum 20 mm external dia) with necessary conduit fittings / accessories fixed concealed in walls/ceiling by means of PVC sleeve/dash fastener with cadmium plated iron screws all as per ISI including sunk type pressed steel terminal boxes for mounting, modular fittings like switches, sockets, fan regulator etc with base cover plate, grid plate etc concealed in walls etc including 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable as continuous earth wire to common earth and connecting to earth dolly of one light / fan / exhaust fan point controlled by one way switch complete all as specified and directed.

Supply and fix time switch 240 volt single phase 20 Amp rating with contactor fitted inside steel enclouser complete all as specified and directed.

Supply and fix Factory made sheet metal enclosure distribution boards, (protection class IP-42) double door, vertical type suitable for mounting MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, single pole and neutral, 4 ways, 240 volts complete all as specified and directed. Note :- MCBs shall be measured and paid for separately under respective item of this schedule.

Supply and fix MCB, single pole, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs catered herein before complete all as specified and directed.

Supply and fix MCB, single pole and neutral, 230 volts, 5 to 32 Amp rating, 10 KA, C series fixed in DBs catered herein before complete all as specified and directed.

Supply and fix aesthetically designed 2 feet x 2 feet LED flat panel light fitting of capacity 18 watt (6500K) for surface mounting which provides soft light and glare free symmetrical ilumination complete fixed/connect properly complete. Note :- (i) Fitting shall be of Make Syska Cat Part No SSK-WP-1018 or equivalent model of make as specified in Appendix 'B' to particular specification. (ii) Quoted rate shall deem to be include cost of lamp. (iii) Light fitting of other make of higher capacity may be used without any price adjustment.

Supplying, laying, testing and commissioning of XLPE insulated, PVC bedded, galvanised steel strip armoured, heavy duty electric cable with stranded aluminium conductor, 1100 Volts grade, connecting both end with suitable lugs of cross sectional area 10 sqmm 2 core, complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection cover and pipe shall be measured and paid for separately under respective items of this schedule.

Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4 mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

Forming construction joint 30mm deep x 10mm wide filled with sealing compound.grade A complete all as specified and directed.

Forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound A complete all as specified and directed.

M/S CHANDRIKA PRASAD AND SONS

chauhan construction

DKS ENGINEERING WORKS

M/S V K MEHROTRA

M/s M A Traders