SPL REPAIR/ REPLACEMENT OF LIGHT FITTINGS INTO LED LIGHT FITTINGS IN VARIOUS FACULTIES AND PROVN OF OPEN BATHROOM AT KALWANT COY OF MCMM JABALPUR UNDER GE (EAST) JABALPUR

Amount

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc complete all as specified and directed.

Taking down carefully unserviceable DBs any type/size with MCCBs/MCBs//Isolator etc and making good disturbed surfaces complete all as specified and directed.

M&L point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLS cable 1100 Volts grade drawn into existing PVC conduits medium grade not less than 20mm( ISI marked) and including PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire including connected to common earth dolly, including concealed MS box with 3 mm thick laminated sheet cover fixed with brass screws and cup washers for mounting of plate mounting for housing the switches, socket outlets, fan regulators etc and making good the disturbed surfaces with cement sand to match with the existing surfaces complete all as specified & directed by Engineer-in-charge for One light Point/ ceiling fan point controlled by one switch complete all as specified and directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLSH grade with multistranded copper conductor ISI marked drawn through heavy duty PVC concealed conduit fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including concealed MS box with 3 mm thick laminated sheet cover fixed with brass screws and cup washers for mounting of plate mounting for housing the switches, socket outlets, fan regulators etc. (a) One light point controlled by one switch complete all as specified and directed.

S&Fswitch piano, flush type single pole, one way 5 Amps capacity complete all as specified and directed.

S&Fceiling rose surface backlite 65x50 mm 3 terminals complete all as specified and directed.

S&F fan regulator step down 120 Watt, 2 module complete all as specified and directed.

S&F LED lights fitting 1 x 18 W, 220 V, AC decorative box type with driver, holder, including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F SMD LED, IP 20, 18W(+/-10%) Recessed downlighter with minimum System efficacy of 120lm/W system lumen output 2160(+/-10%) lumen, operating in an ambient temperature of 0⁰C to 45⁰C at 50Hz frequency. Luminaire shall have aluminium pressure die cast aluminium heat sink with polycarbonate mounting cover in white with high transmittivity diffuser for uniform illumination and reduced glare. EMC/PCT package of wattage of 0.5-1 W LEDs used in the product shall comply with IEC 62471 for Photo-biological safety. LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. The LED shall comply with L70 life of 50000 burning hours tested at maximum current. The LEDs used should be with CCT of 5700 K and CRI of Minimum 80, with MacAdam CCT binning <3 mounted on 1.6mm MCPCB/FR4 with 35 micron cu layer. LED Driver shall be external, Isolated type, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate at nominal rated voltage of 240V with 2.5KV internal surge protection, Power factor of minimum 0.95, driver efficacy of minimum 85%, and total harmonic distortion (THD) of less than or equal to 10% should be integral to the luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 complete all as specified and directed.

S&F Integral, SMD 2x2 Backlit LED Panel, IP 20, 40W LED recessed mounted fixture with system efficacy of minimum 120lm/W and system lumen output of minimum 4800lm, operating in ambient temperature of 0⁰C to 45⁰C at 50Hz frequency. Luminaire shall have CRCA housing coated in white (RAL9016) with translucent HET diffuser for uniform illumination and wider light distribution. LEDs used in the product shall comply with IEC 62471. LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. The LED shall comply with L70 life of 50000 burning hours tested at maximum current. The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be Isolated type, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 4KV internal surge protection, Power factor of minimum 0.95 and total harmonic distortion (THD) of less than or equal to 10% should be integral to the luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 complete all as specified and directed.

S&F Linear 4 Feet Fixture 30 W+/- 1W Suspended mounted having Extruded Aluminium housing in White Powder coated with HET diffuser with minimum system lumen efficacy of 115 lm/W and minimum lumen output of 3450lm width of the fixture between 50mm-65mm(should not be batten type), P.F.>0.95 with THD<10% ,CCT 5700 K, CRI 80.LEDs used in the product shall comply with IEC 62471. LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. The LED shall comply with L70 life of 50000 burning hours tested at maximum current.The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be Isolated type, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 140V to 300V (nominal rated voltage – 240V) . With Class 1 electrical insulation with Fixture have Surge Protection 3kV Fixture should be complete with suspension and mounting it. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 complete all as specified and directed.

S&F 200W SMD LED Highbay luminaire with eye bolt suspension having and system efficacy of 140 lm/W with 28000 system lumens, operating in ambient temperature of 0⁰C to 45⁰C at 50Hz frequency. Luminaire shall be made up of Pure Polyester powder coated pressure die cast aluminium body that is corrosion resistant. Fixture should have aeroflow technology with seperated optical and driver compartment reducing hot spots and enabling good air circulations. Luminaire shall be designed with non-yellowing polycarbonate IP lens to ensure 90 deg beam angle of luminaire for uniform distribution. It should be equiped with high purity integrated IP66 lens with high precision light output with IK10 rating. EMC/ceramic package of wattage of 1-5W LEDs used in the product shall comply with IEC 62471 for Photo-biological safety. Luminaire shall be with IP66 and IK08 protection. LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. The LED shall be compliant with LM70B50 life of 1,00,000 burning hours tested at maximum current for atleast 17000br hrs(LM80 report). The LEDs used should be with CCT of 57000 K and CRI of Minimum 70, with MacAdam CCT binning <5 . LED driver made up of be silicone potted, Integrated type, Isolated, Constant Current and driver accessories be pre-wired in driver compartment and isolated from optical compartment. Driver should have Efficiency > 85% & 6 KV internal surge protection with Auto Cutoff protection and recovery for higher and lower input voltage and with 440V Withstand for 48 Hours. Driver shall have wide input voltage range of 150V to 305V. Power factor of minimum 0.95 and total harmonic distortion (THD) of less than or equal to 10% should be integral to the luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. With Class 1 electrical insulation Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 8 way 240 volts with IP 43 protection and double door, Bus bar rating 100 Amps, suitable for mounting MCBs complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 12 way 240 volts with IP 43 protection and double door, Bus bar rating 100 Amps, suitable for mounting MCBs complete all as specified and directed.

S&F MCB, single pole, 240 volts, 6 to 32 Amps complete all as specified and directed.

S&F MCB, single pole & neutral, 240 volts, 32 to 63 Amps complete all as specified and directed.

Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr depth, for foundation etc n.exc 10 Sqm on plan and getting out in any type of soil complete all as specified and directed.

M&L cement concrete (1:4:8) type D-2 (40 mm graded stone aggregate) as in Mass Concrete complete all as specified and directed.

M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation filling mass concrete complete all as specified and directed.

M&L old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick surfaces in CM (1:4), first coat 10 mm thick plaster in CM 1:4 and second coat 5 mm thick in CM 1:4 with using water proofing liquid finished surfaces even and smooth without using extra cement complete all as specified and directed. Note : WPL shall be measured and paid seperately.

M&L forming embankment including raising (or lowering) earth spreading in layer n .exc 30 cm thick watering, ramming/rolling and finishing to required size and slope etc n exc 1.5 mtr high from base complete all as specified and directed.

M&L broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L PCC 1:4:8 type D2, 75mm thick using 40mm graded aggregate as in sub base complete all as specified and directed.

S&F Non- Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F Glazed ceramic tiles (300x600)x 8-10 mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F MS steel flat iron as in wind tie for roof sheet including securing bolts complete all as specified and directed.

M&L framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and applying two coats distemper oil emulsion over a coat of primer and avg 3 mm thick wall care putty complete all as specified and directed.

M&L applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L painting two coats with synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including preparation of surfaces and priming complete all as specified and directed.

S&F 2000 Ltrs capacity rotational moulded polyethylene water storage tank ISI marks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 20mm bore ball brass valve, high pressure with polyethylene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 20mm bore Gun metal gate valve with iron wheel head screwed both end for iron pipe complete all as specified and directed.

S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

S&F 20 mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

S&F vitreous china white counter oval shape wash hand basin of size 630x450mm incl brackets complete all as specified.

S&F tubular towel rail 20 mm dia 'D' type 600mm long of stainless steel complete all a specified and diredted.

S&F angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed.

S&F brass chromium plated bottle trap for wash basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap bore of trap 32mm fixed complete all as specified and directed.

S&F waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia.etc. complete all as specified and directed.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding laid over 20 mm thick screed bed in CM 1:4 rates including moulding and rounding complete all as specified and directed.

M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F 15 mm bore long neck CP pillar taps, fancy type, cast copper alloy with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F 15mm bore fancy type long neck chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed.

S&F long neck brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F 15mm bore fancy type concealed stop cock chromium plated with long shank and cup complete all as specified and directed.

Returning, filling in, including spreading levelling watering and well ramming in layers nexc 25cm as in hard/dense soil complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed in hard/dense soil complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified and directed

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L 60 mm thick glossy finish machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade complete all as specified and directed.

Schedule of credit amount of Rs. 52669.00 to be deducted during AOC.

SRI SAI CONSTRUCTION COMPANY (BID ID -3342416)

KISHOR KALAMKAR (BID ID -3343204)

RAINA SALES AND SERVICES (BID ID -3343141)

a k builders (BID ID -3343128)

titiksha india (BID ID -3340698)

M/S CHETAN PRAKASH GOYAL (BID ID -3342794)

SR ASSOCIATES (BID ID -3343447)