WELCOME MAINT INCLUDING CERTAIN MISC REPAIR IN OFFICERS MD ACCN UNDER AGE B/R-II AT ITARANA CANTT ALWAR

Amount

Complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforsecent salt, trading oil grees spots etc using mechanical scraper including material and labour water proof/weather proof cement based wall care putty of average thickness 1 mm over the new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer,application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (Step 3) Allow 6-8 hrs time to dry the putty surface.

Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint . Make - Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty) at any height incuding necessary scaffolding.

M&L Providing and applying plaster of paris putty 2mm thick over plastered surface to prepare the surface even and smooth after hacking of existing surface, etc complete all as specified and directed

M & L for applying one coat of distemper oil emulsion, of approved shade/tint, etc complete all as specified and as directed by Engr- in - Charge.

M & L for applying two coat of distemper oil emulsion, of approved shade/tint, etc complete all as specified and as directed by Engr- in - Charge.

Complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforsecent salt, trading oil grees spots etc using mechanical scraper including M&L applying two coats of oil emulsion distemper of approved shed/tint over coat of white wall care putty 1mm thick complete all as speciifed and directed. Note : Putty will paid under respective items

M & L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying two coats of white wash etc complete all as specified and as directed by Engr- in - Charge.

All as per description of serial item No. 7.00 here-in-above but one coat on ceiling surfaces etc complete all as specified and as directed by Engr- in - Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

M&L15mm thick rendering in cement mortar 1:6 on other than fair faces of brick work surace finished even and smooth with out using extra cement etc complete all as specified and directed

M&L for preparing newly plastered surfaces and applying two coats of Oil bound distemper on walls etc complete all as specified and directed by Engineer-in-Charge.

M&L for Rough cast plaster on exterior walls applying the under coat of cement and sand morrtar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed by Engineer in Charge

M&L for preparation of newly plastered surafce of wall and applying two coat of weather proof exterior emulsion paint of approved shade/tint over a coat of wall care putty etc complete all as specified & as directed.

M&L for taking down and removal of loose / disintegrated old concrete up to 50 mm depth/ plaster and cleaning all loose dust washing with water and applying bonding coat nito bond AR or equivlent of modified styrene butadiene emulsion (SBR Bonding agent by volume with the brushes etc to bind New Cement plaster/ polymer Modified plaster/ concrete/ screed concrete with old surface etc complete all as specified & as directed.

M&L for applying 15mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45 ) in proportion 1:3 by weight 5 litres Nit bond SBR 45 to added to 50 KG Cement with 13 litre water addition, finished surface to match with existing adjoining surface of ceiling, beams and alike etc complete all as specified & as directed.

M&L and applying two or more coats of 2 component zinc based epoxy rust preventer (Nitozinc Primer-M) on corroded reinforcement after cleaning and removing the rust from corroded reinforcement with the help of wire brush and treating it with rust remover (Reebaklens RR) including thoroughly cleaning washing air blowing brushing etc complete all as specified & as directed. Note : Qty of Zinc based epoxy rust prevent or only shall be taken into account for payment purpose on the basis of actual consumption.

M & L for writing letters or figures (Block, Roman, Itslic or Indian) n. exc 30 cm height with thick synthetic enamel paint. complete all as specified and as directed by Engr- in - Charge.

M & L for preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr- in - Charge.

M & L for preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr- in - Charge.

Demolition of brick work built in cement mortar or cement lime mortar including all quion arches, etc complete all as specified & as directed.

Taking down chowkats or frames with shutters (without taking off shutters frome the frames) n exc 1.5 sqm each complete all as specified & directed.

Taking down chowkhat with shutter (without taking off shutte from the frame) exc 1.5 Sqm and not exc 4 Sqm each, etc complete all as specified & as directed.

Taking down of shutter exc 1 sqm and n exc 2 sqm each and refixing in same opening after easing, adjusting etc complete all as specified and directed

Demolition cement concrete(unreinfored) as in ground floor and paving not exceeding 15cm thick below or above the ground level etc complete all as specified & as directed.

Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses etc complete all as specified and directed

M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed

All as per ser item 26.00 above but except bricks

M&L vitrified tiles light shed 9 to 10mm thick of size 600mmx600mm as in floor set and jointed in neat cement slurry and pointed in colour cement to match the shed of colour over and incuding 15mm thick cement morter screed bed 1:6 etc complete all as specified and directed

All as per ser item No 28.00 above but in skirting and dado including 10mm thick rendering cement mortar 1:4, etc complete all as specified & as directed.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick of size 300mmx 300mm as in floor set and jointed in neat cement slurry and pointed with white or coloured lcement to match the shed of tiles laid over and including 15 mm thick cement mortar screed bed 1:6 etc complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in vertical surface 300x450x7 mm/450x350x7 mm thick over 10 mm thick rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed.

Treatement for sunken portion is as follows :- (a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed.(b) Maintain the Sunken to a slope of 1:40 outward with 32mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (c) Top of the sunken floor slabs shall be laid to a slope 1:40. The surface of RCC slab shall be made even and smooth by using extra cement while the concrete is still green. Concave fillet in PCC (1:2:4) type B0 of radius 75 mm shall be provided at the junctions of RCC slab and adjoining walls. (d) Floor and side walls upto the finished floor level shall be plastered with 15 mm thick CM (1:4) mixed with water proofing compound @ 3% by weight of cement. Over plastered surfaces, a layer of APP based polymeric membrane not less than 3mm thick, weighing not less than 3 kg per sqm, reinforced with polyster non- woven fabric (weighing not less than 150 gm per square metre) shall be laid by torch application. Side overlaps shall be 100mm and the ends laps shall be 150 mm and overlap joints shall also be sealed by torch application. (e) The sunken portion shall be filled with lean cement concrete (1:5:10), type E2 using 40 mm brick aggregate after carrying out satisfactory testing of CI pipes / joints and slabs / walls by filling water for 72 hours. The sunken portion of Nahani / floor trap and pipe joints shall be embedded in PCC (1:3:6) blocks. (f)32 mm dia GI spout shall be provided to drain out leakage, if any.

Supply only integral waterproofing compound

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (styles), with 2,4 or 6 raised panel design with 2mm thick wood garain finish Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain finished PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

S&F Butt hinges 100mm long extruted aluminum alloy with galavanisied mild steel hing pin etc complete all as specified & directed.

S&F Aluminum anodised, 150 mm long barrel tower bolts of extruded section and fixed etc complete all as specified & directed.

S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked. etc complete all as specified & directed.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore

Taking down or up steel tubing and connection inculding cleaning for refixing or removal to store 20mm bore .

Refixing old steel tubing and connection in new or old position (walls,ceiling,floor etc) bore of pipe in 15mm dia.

Refixing old steel tubing and connection in new or old position (walls,ceiling,floor etc) bore of pipe in 20mm dia.

Supply and fixing, jointing and testing 15mm dia bore galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings including cutting through wall floor etc

Supply and fixing, jointing and testing 20 mm dia bore galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings for the following sizes including cutting through wall floor etc

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good, cutting not exc 10cm girth etc complete as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern EWC), any coloured, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet etc complete all as specified and directed

Supply and fixing in repair PVC flushing cistern low level 10 ltr cap with inlet ball valve float and handle syphonic action type incl brackets and flush pipe of polythene of low or high density ISI marked.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed.

S&F in repairs vitreous china wash basin white of size 550x400 mm with padestal stand including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed.

S&F in reapirs, 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm dia stop valve/angle valve of copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union fixed in repair.

S&F in repairs 15 mm bore fancy type long body bib tap, half turn, with wall flange, cast copper alloy with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.

S&F in repairs fancy type center hole basin mixer without popup waste system but including plain waste coupling 32 mm size with aerator complete cast copper alloy, chromium plated, scrwed down high pressure, with long scrwed shanks & fly nuts scrwed for iron pipes of 15 mm bore complete all as specified & as directed.

S&F in repair CP grating round with /without hole 100mm dia complete all as specified and directed

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size fixed to 15mm bore pipe complete all as specified and directed.

S&F Brass Chromium plated Tubular Towel rail, 20mm dia, D type, 60 cm long between flanges fixed to wall complete all as specified and directed.

Supply and fix stainless steel kitchen plate rack over all size 30" x 31" x 10"(inches) and thickness of stainless steel plate 0.60mm, fixed to wall with stainless steel screws complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs washers and wastes including waste pipe fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors including dismantling etc complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with Holder bat clamps of GI flat iron 25x3 mm including dismantling etc complete all as specified and directed.all as specified and directed.

S&F PVC (SWR) bends 110mm dia any radius.

S&F PVC (SWR) junction single(Single T) equal or unequal with access door110mm dia.

S&F PVC(SWR) Vent cowl 110mm dia.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors including dismantling etc complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with Holder bat clamps of GI flat iron 25x3 mm including dismantling etc complete all as specified and directed.

S&F PVC (SWR) bends 75mm dia any radius.

S&F PVC (SWR) junction single(Single T) equal or unequal 75mm dia.

Supply and fix 110mm PVC (SWR) WC connector bent type all as specified and as directed.

S& F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm float valeve 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.

Disconnecting existing PVC water tank (1000 ltr) setting aside (or lowering if required ) for repair , cleaning etc and hoisting if required reconnecting and refixing in position in position complete all as specified and as directed by the Engineer-In- Charge.

S&F in repair 20mm ball valve with high pressure (PTMT) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm 210 gm.

S&F in repairs 20mm bore Gun Metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed.

S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 900 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple etc complete all as specified and directed.

S&F in repairs health faucet, brass chromium plated for EWC with & including PVC connection 1m long suitable for 15 bore GI pipe with PTMT nut & nipple etc complete all as specified and directed.

S&F in repairs Mirror cabinet PVC frame of size 400 x 500 mm fixed to wall with rawl plug & stainless steel suitable size screws etc complete all as specified and direceted.

S&F in repairs wall mixer chromium plated (3 in -1) with arrangement for both telephonic shower and overhead shower with 220 mm max long bend pipe with hand shower of size 100 x 55 mm with 130 mm long arm & 1.2 mtr house pipe .

S&F in repairs glass corner shelf Parryware or equivalent of Jaquar/Marc) etc complete all as specified & as directed.

S&F in repair 15mm dia bore cast copper alloy chromium plated fancy type pillar tap(Swan Neck) for with out cold & hot water complete all specified and as directed .

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed

M & L for providing Post Construction Antitermite Treatment alongwith external wall below concrete or masonry apron using chemical emulsion @ 2.25 Litres per linear metre including drilling and plugging holes etc in apron with cement mortar 1:2 (1 cement 2 coarse sand ) complete all as specified and as directed. Note : (i) Contractor should mentioned the date of ATT in each Building on his own arrangement. (ii) No extra paiment will be made in this items.

M & L for Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement 2 coarse sand ) to match the existing floors, complete all as specified and as directed. Note : (i) Contractor should mentioned the date of ATT in each Building on his own arrangement. (ii) No extra paiment will be made in this items.

S&F Mild steel Framed work using angle Iron ,flat Iron ,round bars as in security doos/gates with end of bars shouldered and or rivetted or forged into spikes ,framed guard bars barred into iron doors ,walkways railing framework amd similler work confiming to Fe 290 ,GDE E-165 etc complete all as specified and directed.

S & F factory made solid Wooden HDF Moulded door shutter 30mm thick (Style) with 2,4 or 6 raised panel design with 3mm thick Moulded Door facing sheet on front face & 3 mm thick plain colour Door Facing sheet on back face,, with raised High Density Boiling Waterproof Fiberboard skins, the core shall be consist of solid core using Machine filled Rigid Expanded Polyurethane Foam of minimum density 40kg/cum with including additional wooden blocks for fixing of locks etc. The door shall comply with and as per IS 15380 : 2003 & IS 13205 : 1991 complete, supplying and fixing in frame at site as specified and directed.

S&F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel frames with beading complete all as specified & directed.

S&F in repair Aluminium barel tower bolt 300mm long stove enamelled black with bright bolt & fixed.

S&F in replair Aluminium handle of 150m size oval type stove enamelled black all as specified.

S&F mild steel butt hinges medium weight colod rolled of size 100mm, ISI marked etc complete all as specified and directed.

S&F in replacment 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed

Dismantling of concrete post as in Roof truss/puline etc any section in any description and making good in disturbed portion

Dismantling AC/CGI/Fibre sheet (Corrugated,Semi corrugated etc) as in rooof etc complete as as specified

S&F steel work as in tubuler section ( in any description) ncluding special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.

S&F for preparation of new steel surface/privously untreated surface of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified

S&F in repair stainless steel Curtain rod not less than 20 mm dia with chromium plated including both sides finnials and bracket fancy type fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified and directed.

S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S&F vitrious china soap dish white of size 160x160x90mm etc complete all as specified and directed.

S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F powder coated aluinium window having three track section 92mmx31.75mm shutter section 50mmx18mm mounted on bearing to slide on track plain anodised of approved colour including S&F of 5 mm thick frosted/plain glass and wire esh with glazing clip, pvc track gasket ,EPDM rubber gasket on glass of weather tightening alongwith recessed type handle and lock including sealing gap with marble /granite surface with silicon sealent aking it water proof in all manner complete all as specified and directed by Engineer in Charge .

S&F mild steel frame work such as grills,gratring etc,with ends of bars shouldered &/or riveted or forged into spikes,framed guard bars, barred iron door ladder,frame balusters,walk ways, railing,frame work or water tanks & similar work conforming to Fe-290 Gde E-165.

S & F mild steel cupboard shutter with frame, Godrej pattern made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock vertical type size 65mm 4 lever with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12 mm dia bolt 150mm long grouted in brick wall/concrete including making good the disturbed surface as original complete all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.

Supplying and fixing in repair kitchen cabinets made of 18 mm thick consisting of panel of 18 mm thick celluca ply of density 600 Kg.cbm density with prelaminated sheet on one side cut in desired size of shutter and fixed with frame as in cabinet boxes with shelf and shutter full size fitted above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, ball catches, knobs, channels etc including dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing.

Preparation of new steel surface of any description not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer.

ALAKNANDA ENTERPRISES

AARSINFRATECH

M/s ASK Enterprises

KARTIK ENTERPRISES

J.J.ENGINEERING

M/S JINDAL ENTERPRISES

GAR CONSTRUCTIONS

shiva construction