NIT No. 15 item No. 7 (24-25) EE (T)/EE(EnM)M-4

LT Distribution panel sheet steel enclosure made out of 2mm CRCA sheet totally enclosed, powder coated free standing, floor mounted type, dust& vermin proof, outward opening, lockable doors having hidden hinges and a bolted back cover both using non-deteriorating neoprene rubber gaskets to provide IP-54 protection. The each part of the fabricated panel will be strictly subjected to seven tank treatment. The various components, assemblies and sub equipments of the panel will be as per standard given in relevant IS. The bus bar of the panel will be shaped out of high conductivity, electrolytic conductor and shall be liberal sized in aluminum. The control wiring of the panel will be done with PVC flexible copper wires of 1.5mm cross section. Each wire will be terminating with a ferule crimped to the wire, size 1000MM x 1200mm x 250mm. Having following components of approved make.

MCCB 415V, four pole 3phase High breaking capacity 50KA 50Hz,200Amp with spreader & handle Make: - L&T/Havells/Siemens and any approved make by DJB

MCCB 415V, TP 3phase High breaking capacity 50KA 50Hz,100Amp with spreader & Handle Make:- L&T/Havells/Siemens and any approved make by DJB

MCB Single pole 6Amp. Breaking capacity 10 KA Make:- L&T/Havells/Siemens and any approved make by DJB

MCB Triple pole 63Amp. Breaking capacity 10 KA Make:- L&T/Havells/Siemens and any approved make by DJB

MCB Triple pole 32Amp. Breaking capacity 10 KA Make:- L&T/Havells/Siemens and any approved make by DJB

PVC insulated copper flexible cable 25 sq mm single core Make:- Havells/Grandly and any approved make by DJB

Supply of 3 core 50 Sq. mm armoured aluminium conductor PVC insulated and PVC sheathed/XLPE cable. Make-Polycab/Havells and any approved make by DJB

Thermal over load relay 22-32 Make: L&T/siemens Make:- L&T/Havells/Siemens and any approved make by DJB

Digital Amp. 3 phase meter Make AE/L&T

Digital Volt 3 phase meter0-500V -Make AE/L&T

Motor protection relay with current sensor range 16-44 amperes Make:- L&T/Havells and any approved make by DJB

Power contactor 220V 100 Amp. 3pole Make: Make:- L&T/Havells/Siemens and any approved make by DJB

Star delta timer on delay Make:- L&T/Havells/Siemens and any approved make by DJB

Indicating lights LED type RYB & On/OFF Make:- L&T/Havells/Siemens and any approved make by DJB

Current Transformer 200/5 Make AE /Advance

Current Transformer 100/5Make AE /Advance

On load change over switch 200Amp. 4 pole in sheet steel enclosure Make:- L&T/Havells and any approved make by DJB

Power contactor 220V 55 Amp. 3pole Make: Make:- L&T/Havells/Siemens and any approved make by DJB

Over load relay 09-14 Make: L&T/siemens Make:- L&T/Havells/Siemens and any approved make by DJB

Digital Amp. 3 phase meter Make AE/L&T

Current Transformer 50/5Make AE /Advance

Dismantling of the existing old damaged panel & starter ,removing of cable connection & shifting the same from site

Laying & making end termination of both incoming & out going side of cable with brass compressed cable gland ,thimbling on removable cable gland plate

Installation of the panel at site by making foundation on surface and making foundation with M.S. angle & channel, grouting and required civil work for proper foundation /grouting, testing & commissioning of the panel & other accessories and Loading, unloading by crane & heavy labour & cartage up to site with relevant IS as follow: - Check equipments specification - Continuity and ear thing -MCCB mechanism and alignment -Meggaring of all equipments for phase to phase, neutral to body, neutral to earth and phase to earth. - All functional tests -Checking for all tightness of nuts and bolts

INNOVATIVE ENGINEERS (BID ID -1563507)

Premier Engineering Company (BID ID -1563648)

R.P. ENTERPRISES (BID ID -1563536)

HYDROCON ENGINEERS (BID ID -1563669)

Devraj Enterprises (BID ID -1563714)