EE EM II/ SDMC/ 9

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable on surface, medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required. Group C.

Wiring for light point/ power point with 2x4 sqmm FR PVC insulated copper conductor single core in surface/ recessed PVC conduit alongwith 1 no 4 sqmm FR PVC insulated copper conductor S/C cable for loop earthing as required for following locations.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Wiring for circuit/ sub main with 2x2.5 sqmm FR PVC insulated copper conductor single core in surface/ recessed PVC conduit alongwith 1 no 2.5 sqmm FR PVC insulated copper conductor S/C cable for loop earthing as required for following locations.

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Supplying and fixing following way, triple pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way, Double door.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A.

Supplying and fixing 2+6/8 way double door, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).

Supply and fixing 63 amps rating, double pole, 240 volt, isolator in the existing MCB DB complete with connection, testing and commissioning etc, as required.

Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.

Supplying and fixing 6 amps to 32 amps rating, single pole , 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply of AC ceiling fan energy saver type complete with down rod of standard length (30cm), canopy, blades without regulator of following size: 1200 mm sweep.

Installation, testing & commissioning of ceiling fan i/c wiring the down rod of standard length (upto 30 cm) with 1.5 sqmm FR PVC insulated copper conductor single core cable etc. as required.

Supply of hanging clamp for ceiling fan.

S and F of electronic fan regulator 1200/1400mm sweep a.c. ceiling fan on existing switch board as reqd.

Supply of 15 inch (380mm) sweep 1400 rpm exhaust fan heavy duty complete with shutters, blades etc. as reqd.

Installation of exhaust fan upto 450 mm sweep , in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing and fixing 6 SWG dia. G.I. wire on surface or in recess for loop earthing as required.

S/I/T/C of LED tube type luminaire 20 watt rating complete with poly carbonatehousing batten integrated electronic driver prewired with high efficient LEDs having system wattage 20 watt, +- 5%, Luminous (b) Luminous Efficieny lumens/watt >= 95 (c ) Power Factor>= 0.95.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (i) 5/6 amps switch.

(ii) 15/16 amps switch.

(iii) 3 pin 5/6 amp socket outlet.

(iv) 6 pin 5/6 and 15/16 amp socket outlet.

Providing and fixing of 600 mm sweep Air circulater complete with blades, jaal workable on 220/240 volts AC supply etc. as reqd.

Providing of 600 mm sweep pedestal fan complete with blades, base plate, supporting rod, jaal workable on 220/240 volts AC supply etc. as reqd.

Supply of arms of GI pipe of size 20/ 25mm dia B class 4 feet long bent medium grade with 25mm width 5mm thick MS clamps set 2 nos. with 3/ 8 nut and bolts for fixing of GI pipe in various sizes suitable to existing RCC/ MS poles per relevant standard specifications.

Supply of LED street light fitting 70 W complete in all respect, colour temperature 3000K, IP66 protection, toughened glass cover, Aluminium housing.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan), including getting out and disposal of excavated earth lead up to 50m and lift up to 1.5m, as directed by Engineer-in-charge. All kind of soil.

SITC of Pillar box size 900 mm x 450mm x 250mm suitable for mounting incomer of 250 A MCCB/ Main switch 4 Pole and energy meter 3 phase complete with eleethoypic grade Aluminium bus bar of size 25mm x 10mm mounted on galvanized M. S. body powder coated pilferage proof SMC door duly welded with S.S. with rain canopy size 40mm x 40mm x 5mm x 600mm height in cutting 300 mm height below ground and covered with shock proof SMC sheet of 3 mm as required, with suitable stand of 2ft, without MCCB i/ c and making foundation etc. as required.

Supply of 4x 35 Sqmm size of XLPE insulated PVC sheathed Al. Conductor armoured cable 1.1 KV grade confirming to IS-7098.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 35 sq. mm (32mm)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required (a) 63mm dia (OD-63mm ID -51mm nominal).

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Up to 35 sq. mm.

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Up to 35 sq. mm.

SITC of single phase monoblock pumpset complete with all accessories workable of 240 Volts 50 Hz AC supply (a) 1 HP (0.75 KW) single phase pumpset head from 12-30 metre suction and delivery 25X25 mm.

Providing and fixing following rating and breaking capacity and pole MCCB with thermo magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 A, 30KA, FPMCCB.

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 2.2.16 250 Amp, 36KA, FPMCCB.