Tender for the work of Shifting of 200 KVA DTC of Rumad Velguem to a new location at the load Centre in the jurisdiction of S.O Pale under SD II Sakhali.

Cost of Material

RCC poles 11.0 Mtr long

RCC poles 9.0 Mtr long

RCC poles 7.5.0 Mtr long

Stay Set Complete for 11 mrt Rcc pole

GI Nut bolts 65X12mm

HDGI 11 KV 'V' shap cross arm with LA HDG clamps for 11mts long RCC pole

HDG top fitting cross arm of channel ISMC 75x40x6 mm 0.7 mtrs long along with HDG clamps for 11 mtrs along RCC pole

HDG gurad channel of 1.5 mtr long of channel ISMC 75 x 40 x6 mm. for 11.0 mtrs RCC pole

11 KV pin insulator with HDGI pin

11KV Disc Insulators along with hardware (45KN)

HDGI DP structure material

Supply and erection of 11 KV GOAB switches of 200 A

HDG earthing pipe 8ft long 40 mmdia Class B fabricated & perforated including alternate ;ayers of 30 cmc thick of charcoal,salt & earth (charcoal & salt10Kgs each per pit inclusive of excavation,bacfilling & spreading the earth evenly)

Supply and Erection of Distribution Box (M.S) with 400Amps MCCB & Kit-Kat fuses

Supply & erection of DTC Metering unit

Supply & erection of 4G Modem

XLPE single core unarmoured 50 sq mm 1.1 KV grade

11Kv/400 Volts Enamelled danger boards

HDG LT 4 pin cross arm channel type with HDG clamps for 11.0 mts long RCC pole

HDG LT 2 pin cross arm channel type with HDG clmaps for 11.0 mts long RCC pole

LT shackle insulator with Metal parts

LT Pin insulator with GI Pin

AA "ANT" conductor 7/3.10 for phase

AA "GNAT conductor 7/2.21 for double neutral & guard loops

GI Tubular fencing complete with Gateand side dismentaling system as per specification of Distribution Transformer and feeder Pillears (Size 4MX 3MX2M) with concreting for GI fencing supports with plinth (0.3X 0.3X0.5) Cu.m x12 Nos..Each Ratio 1:3:6 and brick masonary

ACSR"WEASEL" Conductor

Cost of Erection

RCC poles 11.0 Mtr long

RCC poles 9.0 Mtr long

RCC poles 7.5.0 Mtr long

Removing and Re-Erection of 200 KVA DTC

Stay Set Complete for 11 mrt Rcc pole

HDGI 11 KV 'V' shap cross arm with LA HDG clamps for 11mts long RCC pole

HDG top fitting cross arm of channel ISMC 75x40x6 mm 0.7 mtrs long along with HDG clamps for 11 mtrs along RCC pole

HDG gurad channel of 1.5 mtr long of channel ISMC 75 x 40 x6 mm. for 11.0 mtrs RCC pole

11 KV pin insulator with HDGI pin

11KV Disc Insulators along with hardware (45KN)

HDGI DP structure material

Supply and erection of 11 KV GOAB switches of 200 A

HDG earthing pipe 8ft long 40 mmdia Class B fabricated & perforated including alternate ;ayers of 30 cmc thick of charcoal,salt & earth (charcoal & salt10Kgs each per pit inclusive of excavation,bacfilling & spreading the earth evenly)

Removing of old FRP distribution Box

Supply and Erection of Distribution Box (M.S) with 400Amps MCCB & Kit-Kat fuses

Supply & erection of DTC Metering unit

HDG LT 4 pin cross arm channel type with HDG clamps for 11.0 mts long RCC pole

HDG LT 2 pin cross arm channel type with HDG clmaps for 11.0 mts long RCC pole

LT shackle insulator with Metal parts

LT Pin insulator with GI Pin

AA "ANT" conductor 7/3.10 for phase

AA "GNAT conductor 7/2.21 for double neutral & guard loops

GI Tubular fencing complete with Gateand side dismentaling system as per specification of Distribution Transformer and feeder Pillears (Size 4MX 3MX2M) with concreting for GI fencing supports with plinth (0.3X 0.3X0.5) Cu.m x12 Nos..Each Ratio 1:3:6 and brick masonary

Removing & Restringing of AAC ANT conductor for jointing

Removing & Restringing of AAC GANT conductor for jointing

Removing and re-erection of XLPE 1.1KV 3 & 1/2 c cable 240 sq. mm

Removing and re-erection of XLPE 1.1KV 3 & 1/2 c cable 120 sq. mm

Removing of 11KV GOAB switch 200 A

Removing of 11KV 200 A H.G Fuse unit

Removing of 9kv, 5KA lightening Arrestor

Removing of HDGI structural material

Removing of deteriorated HDG LT 4 pin cross arm channel type HDG clamps

Removing of deteriorated HDG LT 2 pin cross arm channel type HDG clamps

Removing of deteriorated HDG cut point channel of 1.3 mtr long of channel ISMC 75x 40 x 6 mm with HDG clamps

Removing of deteriorated HDGI 11 KV 'V' shape cross arm with LA HDG clamps

Removing of deteriorated HDG top fitting cross arm of channel ISMC 75x40x6 mm 0.7 mtrs long along with HDG clamps

Removing of deteriorated HDG gurad channel of 1.5 mtr long of channel ISMC 75x40x6 mm

Removing of 11KV pin insulator with HDG pin

Removing of 11KV Disc insulators with Metal part

Removing of 9 Mtr RCC pole

Removing of 7.5 Mtr RCC pole

ACSR"WEASEL" Conductor

Removing of LT shackle insulator with M.P

Removing of LT Pin insulator with GI Pin

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.All kinds of soil

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) All works upto plinth level

Centering & shuttering including Strutting, Propping & removal of forms for :Foundations, Footings, Bases for columns

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

12mm cement plaster 1:4 (1 cement : 4 coarse sand)

Painting three or more coats of arcyllic exterior paints of approved brand and manufacture (such as weather shield, APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete

Supply and spreading of 40 mm/20 mm of basaltic stone aggregates in the swichyard.

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.