Repair to DIET building at Solan

Amount

Demolition above G.L. upto all floor level including disposal of unserviceable materials with in all lead in reinforced cement concrete upto 15cm(fifteen centimeter) thickness as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of materials in all lead and lift including all incidental charges.

Demolition of brick work in cement mortar above G.L. upto floor all levels including stacking of serviceable materials and disposal of un-serviceable materials with in all lead as per direction of the Engineer-in-Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Dismantling G.I. Sheet roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within all lead as per direction of Engineer-in-Charge and as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Dismantling cement asbestos celotax/hard board in ceiling or partition wall including stacking of serviceable materials and disposal of un-serviceable materials within all lead (Frame work such as joists, beams to be measured and paid for separately) as per direction of Engineer-in-Charge and as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Dismantling steel work upto span of 10 metres and a height of 5 metres Including dismembering. P in built up sectional in angles, tees,flats and channels including all gusset plates, bolts, nuts, beading etc and stacking the materials within20 metres lead as per direction of Engineer-in-Charge and as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Dismantling doors, windows and clerestorey windows, ventilators ( wood or steel) shutters including chaukhats, architraves, hold fasts and other attachments etc. complete in all respects not exceeding 3.00 ( three) square meter in area etc. as per direction of Engineer in Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Taking out doors, windows and clerestory windows shutters Not exceeding 3 sqm (three square meter) in area (steel or wood) including stacking within all lead as per direction of Engineer in Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Dismantling 80 mm (eighty milimeters) dia old C.I. Pipes including excavaton and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within all lead. as per direction of Engineer in Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing 40mm thick 2nd class deodar wood paneled glazed or paneled and glazed shutters for doors, windows and clerestory windows including black enameled iron butt hinges with necessary screws as per H.P. PWD. Spesification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing clerestory window chowkhats including cutting masonry for embedding hold fasts in Cement mortar 1:4 (1 Cement : 4 Sand) and making good the damage to walls complete as per HPPWD specification 1990 ( One thousand nine hundred ninety) volume-1 ( One) including carriage of all equipments and labour to various locations through all modes of transportation in all leads and lifts as per direction of engineer in charge.

White glazed tiles 6 mm (six milimeters) thick in flooring, treads of steps and landing laid on a bed of 12 mm(twelve milimeters) thick cement mortar 1:3(1 cement :3 sand) finished with flush pointing in white cement including carriage of all labour, equipment and material to various location through all modes of transportation in all leads and lift, including all incidental charges.

Providing and laying antiskid (Mart Finish) ceramic tiles 5.5 (five point five) milimeters thick 30*30 (thirty into thirty)centimeters size in flooring laid over 12 (tweelve ) milimeters thick cment mortar 1:3(one cement:isto three sand)in all floors upto all heights and levels complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 5mm thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) as per direction of Engineer-in-Charge and as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing corrugated G.I. sheet roofing fixed with galvanized iron J or L hooks bolts and nuts 8mm (eight millimeter) diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of pulins, rafters and trusses 0.63mm(Zero point sixty three millimeter) thick sheet as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges hoisting upto all heights and level.

Providing and fixing .15 cm.wide 45 cm, 0.80mm thick sheet overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges and as per direction of engineer in charge.

Providing and fixing M.S. BP sheet 1.66 mm (one poine sixty six millimeter ) to 2 mm (two millimeter) thick in eaves board/facia/soffits ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (base members of steel work shall be measured and paid for separately) work as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing on wall face PVC (D-Plast) rain water pipes 100mm (One hundred millimeters) dia pipe of working pressure not less than 4.5 (Four point Five) kg/sqm. Including filling the joints with approved adhesive complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jumb lock jamb, beed and if reuired angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plate and shock absorber Profile-A as specified and applying a coat of approved steel primer after pretretment of the surface as directed by Engineer-in-Charge

Steel work in trusses and trussed purlins in buildings in built up sections, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges and as per direction of engineer in charge.

Painting two coats with white ready mixed paint. (excluding priming coat on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

One extra subsiquent coat with white readymixed paint on freshly painted steel and othermetal surfaces as per HP.PWD. Specification 1990 Volume-1, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Finishing wall with water proof cement paint of approved brand and manufacture and of required shade on undecorated wall surface with two coats to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials as per HPPWD specification 1990 ( One thousand nine hundred ninety) volume-1 ( One) including carriage of all equipments and labour to various locations through all modes of transportation in all leads and lifts as per direction of engineer in charge.

One extra sub sequent coat of water proofing cement paint of approved brand and manufacture as per HPPWD specification 1990 ( One thousand nine hundred ninety) volume-1 ( One) including carriage of all equipments and labour to various locations through all modes of transportation in all leads and lifts as per direction of engineer in charge.

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres with Lime Mortar 1 : 2 (1 Lime : 2 Sand) as per HPPWD specification 1990 ( One thousand nine hundred ninety) volume-1 ( One) including carriage of all equipments and labour to various locations through all modes of transportation in all leads and lifts as per direction of engineer in charge.

Providing and fixing to wall, ceiling and floor 15mm (Fifteen milimeters) nominal bore galvinised mild steel tubes (medium grade ) tube fittings and clamps including making good the wall, ceiling and floor as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 100mm (one hundred milimeters) nominal size diameter M.S. stay and clamps for sand cast iron / cast (spun) iron pipes as per the direction of Engineer in Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts i/c all incidental charges.

Providing and fixing Long pattern vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts i/c all incidental charges.

Providing and fixing Vitreous China wash down, Ordinary water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(One cement isto one sand) (Seat and over to be measured and paid for separately) as per the direction of Engineer in Charge and as per HP.PWD. Specification i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts & all incidental charges.

Providing and fixing 10 (ten) litres capacity PVC low level duel flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) as per HPPWD specification 1990 ( one thousand nine hundred ninety ) volume-1 including carriage of material through all modes of transport including all incidentals in all leads and lifts as per direction of Engineer in Charge.

Providing and fixing high level C.I. flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as syphonic arrangement, 15mm nominal size brass ball valve with polythene float, unions and coupling for connections with inlet, outlet and overflow pipes etc. including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe chain and pull are not included in the rate).10.00/12.50 litres capacity as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing plastic seat ( SOLID TYPE/ Hollow type) white plastic seat and cover for wash down water closet with C.P. Brass hinges and rubber buffers as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing vitreous china bowl pattern urinal Flat back type of size 430x260mmx350mm(four hundred thirty into two hundred sixty into three hundred fifty milimeter) including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 600*450 (Six hundred into Four hundred Fifty) millimeters beveled edge mirror or superior glass mounted on 6mm thick A.C. sheet ply wood sheet and fixed to wooden plugs with brass screws and washers as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.

Providing and fixing 600mm x 20mm (six hundred into twenty millimeter) Johnson modle No. T0250C Towel rail complete in all respect as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and fixing Recessed soap tray 150mm x 150 mm (one hundred fifty into one hundred fiftymilimetres) size. (Vitreous China ) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 15mm dia brass bib tap (Superior orheavy type) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15mm dia brass bib tap long body (Superior orheavy type) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Construction chamber 300mm x 300mmx500mm (three hundred into three humdred into five hundred milimeters) inside with 100 mm (one hundred milimeters) inside size for stop cock with C.I. surface box 100mm x 100 mm x 75mm (One hundred into one humdred into Seventy five milimeters )(inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 75mm thick foundation concrete 1:5:10 ( 1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying (to level or slopes) and 1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 finished smooth complete including curing as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15mm (fifteen milimeters) C.P. brass angle valve without Nuts and pipe as per the direction of Engineer in Charge and as per HP.PWD. Specification i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts i/c all incidental charges.

Providing and fixing 15mm (fifteen milimeters) nominal bore P.V.C. connection with brass unions 300/450mm(three hundred / four hundred fifty milimeter) length as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 20 mm (twenty milimeters) nominal bore P.V.C. connection with brass unions 300/450mm(three hundred / four hundred fifty milimeter) length as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing110 mm X 90 mm (one hundred ten into ninety milimeters) dia PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

110 mm (one hundred ten milimeters)dia.

75 mm (seventy five milimeters) dia.

Providing and fixing 75mm (seventy five milimeter) dia PVC single equal brnach plain ISI marked including fixing with approved adhesive etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 500 litres net capacity tank PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing on wall faces PVC door bend 110mm (one hundred ten milimeter dia. for rain water pipes including filling the joints with approved adhesive complete as per the direction of Engineer-in-Charge and as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.:-

Providing and fixing PVC plain tee ISI marked including fixing with approved adhesive etc.complete as per the direction of Engineer-in-Charge and as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

110 mm dia (one hundred ten milimeter dia.)

90 mm dia (ninty milimeter dia.)

Providing and fixing 75 mm (seventy five millimeters) dia. PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete in all respects as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 90mm (Ninty milimeters) dia PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

rajneesh katna

M/s Tanmit Construction

Arun Sharma