WC 4460 Renovation of EDC Hostel Building at Hyderabad SS

ATTACHMENTS General guidelines for filling up the Attachments

Renovation of EDC Hostel Building at Hyderabad SS

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645)

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3, 4, 5, 6, 7, 8, 9, 11, 12,13, 14, 15 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security : To be submitted as per proforma provided in the Bidding Document.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

8 Attachment 20: Unequivocal consent of the proposed Associate(s) for the purpose of executing the 'Second Contract' and /or 'Third Contract' as an independent Contractor (applicable to foreign bidder) : No specific format is provided by POWERGRID. Bidder may use their own format.

9 Attachment 21: Capacity, Capability and Experience of Proposed Associate(s) (applicable for foreign bidder) : No specific format is provided by POWERGRID. Bidder may use their own format.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

Renovation of EDC Hostel Building at Hyderabad SS

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645)

Enter the details of the bidder below:

Specify type of Bidder Sole Bidder

Name of the Bidder

Address of Registered Office

Contact Details:

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) ATTACHMENT-3 (QR)

Renovation of EDC Hostel Building at Hyderabad SS

(Qualifying Requirement Data)

Bidder’s Name and Address (Bidder) : To

Name: 0 Sr.GM(C&M)

Address: 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

In support of the Qualification Requirements (QR) for bidders, stipulated in Section-III of the Bidding Documents, we furnish herewith our QR data/details/documents etc. along with other information, as follows (The QR stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in Section-III shall prevail).

We are furnishing the following details/document in support of Qualifying requirement for the subject package.

A Attached copies of original documents defining :

a) The constitution or legal status; #REF!

b) The principal place of business; #REF!

c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).

B Attached original & copies of the following documents :

a) Written power of attorney of the signatory of the Bid to commit the bidder.

1.0 GENERAL INFORMATION

Bidder is required to provide general information as per the following format.

S No. Particulars For Individual Firm

1 Name of the Firm

2 Head Office/ Registered Office Address

5 Contact Person

6 Place of Incorporation/ Registration

7 Year of Incorporation/ Registration

8 Nationality of the Agency

[Necessary documents to eatablish legal status of the bidder should be uploaded with the bid]

2.0 TECHNICAL REQUIREMENTS {Reference Section-III}

2.1 Bidder who wishes to participate in the tender should have successfully completed Civil works for any State/Central Govt. departments/ undertakings/ private organizations during last Five years as on the originally scheduled date of bid opening: One similar work of value not less than Rs. 185.06 Lakhs excl. GST or Two similar works, each of value not less than Rs. 1115.66 Lakhs excl. GST or Three similar works, each of value not less than Rs. 92.53 Lakhs excl. GST

(a) Following documents shall be submitted by the bidder as evidence of above: (i) Completion certificate(s) from the client for the work inter alia indicating final executed amount and date of completion or any other document, authenticated by the client, containing relevant information to conclusively establish that the bidder has completed the requisite work(s) as per the requirement specified above. (ii) The copy of corresponding work order(s) shall also be submitted. Note: Contracts involving only excavation/earth work or only painting works will not be considered for technical experience.

2.2 Format for the Bidder for indicating its technical experience (in support of meeting the requirement of para 2.1 above is to be furnished, as applicable, using this format]

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

3.0 FINANCIAL REQUIREMENTS {Reference Section-III}

a) (i) The Minimum Annual Average Turnover* (MAAT) of the bidder for the best three (3) financial years out of the preceding five (5) financial years shall be: Rs. 346.99 Lakhs * Note- “Annual gross revenue from operation/gross operating income as incorporated in the profit &loss account excluding other income”.

Note: In case the bidder is a holding company, the Financial Position criteria referred to in clause 3.0 above shall be that of holding company only (i.e. excluding its subsidiary / group companies). In case bidder is a subsidiary of a holding company, the Financial Position criteria referred to in clause 3.0 above shall be that of subsidiary company only (i.e. excluding its holding company).

RELAXATION FOR MSME BIDDERS MSMEsˆ / START Ups^-: MSEs$ and START Ups^ meeting the specified requirements at (I) Technical Experience above shall also be considered qualified if they meet 80% (Eighty percent) of the requirements as specified at para (II) above in financial position.

^ Start-Ups as defined by DPIIT, applicable as on the originally scheduled date of bid opening. $ MSE as defined in the bidding documents. Bidder shall furnish documentary evidence in support of the qualifying requirements stipulated above.

(a) Following documents shall be submitted by the bidder as evidence of above: i) Audited balance sheet and Profit & Loss Account for the preceding five (5) financial years. In case, the audited balance sheet for latest financial year is not available, a certificate from the Chartered Accountant on their letter head certifying the financial turnover for the latest financial year may be submitted. ii) In case, the bidder is not covered under compulsory tax audit under the IT act for a particular financial year, a copy of acknowledgement of income tax return filed for the corresponding period should also be submitted along with either certificate from Chartered Accountant certifying the turn over or print out of Form 26AS.

3.2 Format for the Bidder for indicating its Financial Criteria (in support of meeting the requirement of para 3.1 above is to be furnished, as applicable, using this format]

Financial Year Turnover

Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

(Use separate sheet for each experience/ Contract)

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) ATTACHMENT-4

Renovation of EDC Hostel Building at Hyderabad SS

(Alternative, Deviations and Exceptions to the Provisions)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Reason for change The change in Bid Prices if the deviation is withdrawn and the Bidder conforms to the Specifications

Any proposed deviation will be applicable only for the bidder whose bid is substantially responsive in accordance with Clause 22, Section ITB, Vol. I of the bidding documents. If a bid is not substantially responsive, it will be rejected and may not subsequently be made responsive by the bidder by correction of the non-conformity.

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) ATTACHMENT-5

Renovation of EDC Hostel Building at Hyderabad SS

(Work Completion Schedule)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject package i.e., Renovation of EDC Hostel Building at Hyderabad SS for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Period in months from the effective date of Contract

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Note: Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) ATTACHMENT-6

Renovation of EDC Hostel Building at Hyderabad SS

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Note: The information in similar format should be furnished for each partner of joint venture in case of joint venture bid.

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) ATTACHMENT-7

Renovation of EDC Hostel Building at Hyderabad SS

(Declaration regarding Social Accountability)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) Attachment-8

Renovation of EDC Hostel Building at Hyderabad SS

Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise)

Bidder’s Name and Address (Bidder) : To:

Contract & Material

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Southern Region -I Headquarters

0 Kavadiguda Main Road

0 Secunderabad - 500080 (Telangana)

I. We have read the provision in the Bidding Documents regarding furnishing the option for advance payment.

Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents,

we hereby confirm to opt the following:

Interest Bearing Initial Advance: Supply Portion

(Select from drop down list)

We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1. Name of the Supplier/ Contractor in whose favour payment is to be made Details

2. Address with PIN Code and State

Registered Office:

Correspondence Address:

3. Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

4. Permanent Account (PAN) No.

5. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)

6 Name of the States/UT GSTIN number

a Andhra Pradesh

9. PF Registration No. of the Company

10. PF Regional Office covered (with Address)

11. Name of Contact Person

12. Telephone No(s)

13. Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account: Current Account

14. 9 digit MICR code printed at bottom in middle, next to cheque no.

15. IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) ATTACHMENT-9

Renovation of EDC Hostel Building at Hyderabad SS

(Additional Information)

Bidder’s Name and Address (Bidder) : To

Name : 0 Contract & Material

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region -I Headquarters

0 Kavadiguda Main Road

Secunderabad - 500080 (Telangana)

In support of the additional information required as per ITB Sub-Clause 9.3 (i) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

1.0 The Bidder shall furnish

Certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorization Letter(s) from the bidder addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:

Sl. No. Letter Ref. Date Addressed to (name of the Bank)

1.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder may result in rejection of Bid.

1.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years. A consistent history of awards invlolving litigation against the Bidder may result in rejection of Bid.

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

3.0 Description of the plant for carrying out the work

Bidders should provide information of the plant(s) for carrying out the work including the proposal of manufacturing methods in sufficient detail to demonstrate the adequacy of the bidder’s proposals to meet the technical specification.

3.0 OTHER INFORMATION

3.1 Current Contract Commitments of works in progress

Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Value of outstanding work (Rs.) Estimated completion date

3.2 Financial Data:

Figures Rs in Million

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) ATTACHMENT-10

Renovation of EDC Hostel Building at Hyderabad SS

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

Integrity Pact - separately attached herewith in Volume-III.

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Between #REF! #REF!

Power Grid Corporation of India Limited #REF! #REF!

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!

"POWERGRID", #REF! #REF!

#REF! #REF! having its Registered Office at ,

hereinafter referred to as

"The Bidder/Contractor"

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Renovation of EDC Hostel Building at Hyderabad SS

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 1 of 8

Renovation of EDC Hostel Building at Hyderabad SS Package and Specification Number SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) POWERGRID values full compliance with all relevant laws and regulations, and the principles of economical use of resources, and of fairness and transparency in its relations with its Bidders/ Contractors.

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 2 of 8

during his participation in the tender process and during the contract execution :

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

(Office Seal) (Office Seal)

Designation : #REF!

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Integrity Pact Page 8 of 8

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) ATTACHMENT-11

Renovation of EDC Hostel Building at Hyderabad SS

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

Further, we hereby confirm that except as mentioned in the Schedule – 4 (Alternative, Deviations and Exceptions to the Provisions) hereof and/or the Covering Letter, forming part of our First Envelope :

(i) there are no discrepancies/inconsistencies and deviations/omissions/ reservations to the Bidding Documents, in the Second Envelope bid;

We also confirm that in case any discrepancies/ inconsistencies and deviations/ omissions/ reservations, as referred to in para (i) and (ii) above, is observed in the Second Envelope, the same shall be deemed as withdrawn/rectified without any financial implication, whatsoever to POWERGRID. However, in case of any arithmetical errors, the same shall be governed as per the provision of ITB Sub-Clause 27.2 read in conjunction with BDS

Date 0-Jan-1900 Printed Name 0

Place 0-Jan-1900 Designation 0

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) ATTACHMENT-10

Renovation of EDC Hostel Building at Hyderabad SS

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

Safety Pact - separately attached herewith in Volume-III.

Date : 0 Printed Name : 0

Place : 0 Designation : 0

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) ATTACHMENT-13

Renovation of EDC Hostel Building at Hyderabad SS

(Declaration regarding Code of Integrity for Public Procurement (CIPP) Policy of POWERGRID)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby declare that we have read and abide by the Code of Integrity for Public Procurement (CIPP) Policy of POWERGRID, as detailed herein below:

Code of Integrity for Public Procurement: 1.1 Employer as well as bidders, suppliers, contractors and consultants should observe the highest standard of ethics and should not indulge in the following prohibited practices, either directly or indirectly, at any stage during the procurement process or during execution of resultant contracts:

i) “Corrupt practice”: making offers, solicitation or acceptance of bribe, rewards or gifts or any material benefit, in exchange for an unfair advantage in the procurement process or to otherwise influence the procurement process or contract execution; ii) “Fraudulent practice”: any omission or misrepresentation that may mislead or attempt to mislead so that financial or other benefits may be obtained or an obligation avoided. This includes making false declaration or providing false information for participation in a tender process or to secure a contract or in execution of the contract; iii) “Anti-competitive practice”: any collusion, bid rigging or anti-competitive arrangement, or any other practice coming under the purview of The Competition Act, 2002, between two or more bidders, with or without the knowledge of the Employer, that may impair the transparency, fairness and the progress of the procurement process or to establish bid prices at artificial, non-competitive levels; iv) “Coercive practice”: harming or threatening to harm, persons or their property to influence their participation in the procurement process or affect the execution of a contract;

v) “Conflict of interest”: any personal, financial, or business relationship between the bidder and any personnel of the procuring entity who are directly or indirectly related to the procurement or execution process of the contract, which can affect the decision of the procuring entity directly or indirectly. vi) “Undue Advantage”: improper use of information obtained by the bidder from the procuring entity with an intent to gain an unfair advantage in the procurement process or for personal gain. This also includes if the bidder (or his allied firm) provided services for the need assessment/ procurement planning of the tender process in which it is participating; vii) “Obstructive practice”: materially impede the Employer’s investigation into allegations of one or more of the above mentioned prohibited practices either by deliberately destroying, falsifying, altering; or by concealing of evidence material to the investigation; or by making false statements to investigators and/or by threatening, harassing or intimidating any party to prevent it from disclosing its knowledge of matters relevant to the investigation or from pursuing the investigation; or by impeding the Employer’s rights of audit or access to information.

1.2 Obligations for Proactive Disclosures i) POWERGRID as well as bidders, suppliers, contractors and consultants, are obliged under Code of Integrity for Public Procurement to suo-moto proactively declare any conflicts of interest (coming under the definition mentioned above – pre-existing or as and as soon as these arise at any stage) in any procurement process or execution of contract. Failure to do so would amount to violation of this code of integrity; and ii) Any bidder must declare, whether asked or not in a bid document, any previous transgressions of such a code of integrity with any entity in any country during the last three years or of being debarred by any other procuring entity. Failure to do so would amount to violation of this code of integrity. iii) To encourage voluntary disclosures, such declarations would not mean automatic disqualification for the bidder making such declarations. The declared conflict of interest may be evaluated and mitigation steps, if possible, may be taken by POWERGRID. Similarly voluntary reporting of previous transgressions of Code of Integrity elsewhere may be evaluated and barring cases of various grades of debarment, an alert watch may be kept on the bidder’s actions in the tender and subsequent contract.

1.3 Punitive Provisions: Without prejudice to and in addition to the rights of POWERGRID to other penal provisions as per the Bidding Documents or Contract, if POWERGRID comes to a conclusion that a (prospective) bidder/supplier, directly or through an agent, has violated this code of integrity in competing for the contract or in executing a contract, POWERGRID may take appropriate measures including one or more of the following: i) if the bid(s) is under consideration in any procurement a) Forfeiture or encashment of Bid Security b) calling off of any pre-contract negotiations, and; c) rejection and exclusion of the bidder from the procurement process ii) if a contract has already been awarded a) Cancellation/termination of the contract in question; b) Forfeiture or encashment of Contract Performance Guarantee (CPG) of the contract in question; iii) Provisions in addition to above: a) Removal from the list of registered suppliers and banning/debarment of the bidder/contractor from participation in future procurements in line with POWERGRID’s policy for “Black-Listing of Firms / Banning of Business”. b) In case of anti-competitive practices, information for further processing may be filed with the Competition Commission of India; c) Initiation of suitable disciplinary or criminal proceedings against any individual or staff found responsible.

1.4 In pursuance to this policy, the Employer will have the right to require that the provision be included in Bidding Documents and in contracts, requiring Bidders, suppliers, and contractors and their sub-contractors to permit the Employer to inspect their accounts and records and other documents relating to bid submission and contract performance under this project only and to have them audited by auditors appointed by the Employer.

Further, we hereby confirm that incase of transgression of CIPP, we are aware that we may get delisted from Registered Suppliers / Contractors and POWERGRID may take other punitive actions such as Cancellation of Contracts, Banning and Blacklisting or action in Competition Commission of India etc.

We hereby confirm that we observe the highest standard of ethics and shall not indulge in the following prohibited practices, either directly or indirectly, at any stage during the procurement process or during execution of resultant contracts:

i) Corrupt Practice

ii) Fradulent Practice

iii) Anti-competitive Practice

iv) Coercive Practice

v) Conflict of Interest

vi) Obstructive Practice

Date 0-Jan-1900 Printed Name 0

Place 0-Jan-1900 Designation 0

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) ATTACHMENT-14

Renovation of EDC Hostel Building at Hyderabad SS

(Declaration in regard to bid capacity)

Bidder’s Name and Address (Bidder) : To

Name: 0 Sr.GM(C&M)

Address: 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

In support of determining the balace bid capacity of the bidders as stipulated in the Qualification Requirements (QR) in Section-III of the Bidding Documents, we hereby declare the following details:

I) Details of the contracts awarded by SR-I, POWERGRID :

S No. Details of the contracts awarded by SR-I, POWERGRID in FY 2025-26 LOA/ PO reference number along with date of award

II) Details of the tenders floated by SR-I, POWERGRID, for which bidder has submitted their bid:

S No. Details of the tenders floated by SR-I, POWERGRID in FY 2025-26, for which bidder has submitted their bid: Tender reference number (RFx / Specification No.) & date of tender publication

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) ATTACHMENT-15

Renovation of EDC Hostel Building at Hyderabad SS

(Declaration by the Bidder for 'POWERGRID Whistle Blower and Fraud Prevention Policy')

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby declare that we, along with our associate/ collaborators/ sub-contractors/ sub-vendors/consultants/ service providers shall strictly adhere to the 'POWERGRID Whistle Blower and Fraud Prevention Policy'.

We, along with our associate / collaborator / subcontractors / sub-vendors / consultants / service providers shall observe the highest standard of ethics and shall not indulge or allow anybody else working in our organization to indulge in fraudulent activities during execution of the contract and would immediately apprise the Employer about any fraud or suspected fraud as soon as it comes to their notice.

Date 0-Jan-1900 Printed Name 0

Place 0-Jan-1900 Designation 0

SPEC. NO.: SR-I/C&M/WC-4460/2025/RFx-5002004923 (SR1/NT/W-CIVIL/DOM/B00/25/15645) Bid Form-1st Envelope

Bid Proposal Ref. No.

Power Grid Corporation of India Ltd.,

Southern Region -I Headquarters

Kavadiguda Main Road

Secunderabad - 500080 (Telangana)

Name of Contract : Renovation of EDC Hostel Building at Hyderabad SS

Dear Ladies and/or Gentlemen,

1.0 Having examined the Bidding Documents, including Amendments the receipt of which is hereby acknowledged, we the undersigned, offer to execute the work under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 3.2 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid consisting of Techno – Commercial Part & Price Parts.

2.0 Attachments to the Bid Form

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments:

(a) Attachment 1 Bid Security, in a separate envelope, for a sum of Rs. 4,63,000 (Rs. Four Lacs and Sixty Three Thousand only) initially valid for a period of Seven (7) months from the date set for opening of bids.

(b) Attachment 2 A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 6.

(c) Attachment 3 Bidder’s Eligibility and Qualifications

(d) Attachment 4 The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein

(e) Attachment 5 Work Completion Schedule.

(f) Attachment 6 Information regarding ex-employees of Employer in Bidder’s firm.

(g) Attachment 7 Declaration regarding Social Accountability

(h) Attachment 8 Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

(i) Attachment 9 Additional Information

(j) Attachment 10 Integrity Pact

(k) Attachment 11 Declaration

(l) Attachment 12 Safety Pact

(m) Attachment 13 Declaration for Code of Integrity for Public Procurement (CIPP) Policy of POWERGRID.

(n) Attachment 14 Declaration in regard to bid capacity.

(o) Attachment 15 Declaration for 'POWERGRID Whistle Blower and Fraud Prevention Policy'.

(p) Attachment 21 Affidavit for self-certifictaion PPP-MII

(q) Attachment 23 Compliance to the process related to the e-RA

(r) Attachment 26 Certification by the Bidder per DoE Order

(s) Attachment 28 Hard Copy Declaration

3.0 We are aware that our bid is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in the bid documents.

3.2 We declare that as specified in Bidding Documents, the RATES of all the Goods to be supplied under this contract shall remain FIRM during the currency of the contract and no price adjustment shall be applicable..

4.0 We confirm that except as otherwise specifically provided our Bid Prices include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

4.1 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents

4.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

5.0 Construction of the Contract

5.1 We declare that we have studied the mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us Single Contract covering all goods and related services.

6.0 We have read the various clauses and provisions in bid documents and confirm that all the specified stipulations are acceptable to us.

Further we understand that deviation taken in any of the above clauses by us shall make our bid non-responsive as per provision of bidding documents and rejected by you.

7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification/Letter of Award to us, and to achieve the completion of works and related services within the time stated in the Bidding Documents.

8.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.

9.0 We agree to abide by this bid for a period of Six (06) months from the date initially stipulated for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period

10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

11.0 We understand that you are not bound to accept the lowest or any bid you may receive.

12.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

(a) Renovation of EDC Hostel Building at Hyderabad SS

13.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced.

15 Further, we hereby confirm that except as mentioned in the Attachment -4 (Deviations) hereof:

(i) there are no discrepencies/inconsistencies and deviations/omissions/reservations to the Bidding Documents,;

16 We also confirm that in case any discrepencies/inconsitencies and deviations/omissions/reservations, as referred to in para (i) and (ii) above, is observed, the same shall be deemed as withdrawn/rectified without any finacial implication, whatsoever to POWERGRID. However, in case of any artithmetical errors, the same shall be governed as per the provisions of ITB

We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only EURO Four Thousand Nine Hundred Sixty Only RMB Ten Thousand Three Hundred Fifty Two Only INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

85 Eighty Five 60 Sixty 52 Fifty Two 47 Forty Seven

8 Eight Hundred 9 Nine Hundred 3 Three Hundred 6 Six Hundred

55 Fifty Five Thousand 4 Four Thousand 10 Ten Thousand 91 Ninety One Thousand 0 0 0 0 0 plus

1 One Lac 0 0 6 Six Lac 0 0 0 0 1

1 One 1 One 1 One 1 One 0 0 1 0 1

2 Two 2 Two 2 Two 2 Two 0 0 1 1 0

3 Three 3 Three 3 Three 3 Three 0 0 1 1 1

4 Four 4 Four 4 Four 4 Four 0 1 0 0 0

5 Five 5 Five 5 Five 5 Five 0 1 0 0 1

6 Six 6 Six 6 Six 6 Six 0 1 0 1 0

7 Seven 7 Seven 7 Seven 7 Seven 0 1 0 1 1

8 Eight 8 Eight 8 Eight 8 Eight 0 1 1 0 0

9 Nine 9 Nine 9 Nine 9 Nine 0 1 1 0 1

10 Ten 10 Ten 10 Ten 10 Ten 0 1 1 1 0

11 Eleven 11 Eleven 11 Eleven 11 Eleven 1 1 1 1 1 USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

12 Twelve 12 Twelve 12 Twelve 12 Twelve

13 Thirteen 13 Thirteen 13 Thirteen 13 Thirteen

14 Fourteen 14 Fourteen 14 Fourteen 14 Fourteen

15 Fifteen 15 Fifteen 15 Fifteen 15 Fifteen

16 Sixteen 16 Sixteen 16 Sixteen 16 Sixteen 0 0 0 0 0 +

17 Seventeen 17 Seventeen 17 Seventeen 17 Seventeen 0 0 0 0 1 /- +

18 Eighteen 18 Eighteen 18 Eighteen 18 Eighteen 0 0 0 1 0 /-

19 Nineteen 19 Nineteen 19 Nineteen 19 Nineteen 0 0 0 1 1

20 Twenty 20 Twenty 20 Twenty 20 Twenty 0 0 1 0 0

21 Twenty One 21 Twenty One 21 Twenty One 21 Twenty One 0 0 1 0 1

22 Twenty Two 22 Twenty Two 22 Twenty Two 22 Twenty Two 0 0 1 1 0

23 Twenty Three 23 Twenty Three 23 Twenty Three 23 Twenty Three 0 0 1 1 1

24 Twenty Four 24 Twenty Four 24 Twenty Four 24 Twenty Four 0 1 0 0 0

25 Twenty Five 25 Twenty Five 25 Twenty Five 25 Twenty Five 0 1 0 0 1

26 Twenty Six 26 Twenty Six 26 Twenty Six 26 Twenty Six 0 1 0 1 0

27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 0 1 0 1 1

28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 0 1 1 0 0

29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 0 1 1 0 1

30 Thirty 30 Thirty 30 Thirty 30 Thirty 0 1 1 1 0

31 Thirty One 31 Thirty One 31 Thirty One 31 Thirty One 1 1 1 1 1 USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

32 Thirty Two 32 Thirty Two 32 Thirty Two 32 Thirty Two

33 Thirty Three 33 Thirty Three 33 Thirty Three 33 Thirty Three

34 Thirty Four 34 Thirty Four 34 Thirty Four 34 Thirty Four

35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr

36 Thirty Six 36 Thirty Six 36 Thirty Six 36 Thirty Six

37 Thirty Seven 37 Thirty Seven 37 Thirty Seven 37 Thirty Seven

38 Thirty Eight 38 Thirty Eight 38 Thirty Eight 38 Thirty Eight

39 Thirty Nine 39 Thirty Nine 39 Thirty Nine 39 Thirty Nine

40 Forty 40 Forty 40 Forty 40 Forty

41 Forty One 41 Forty One 41 Forty One 41 Forty One

42 Forty Two 42 Forty Two 42 Forty Two 42 Forty Two

43 Forty Three 43 Forty Three 43 Forty Three 43 Forty Three

44 Forty Four 44 Forty Four 44 Forty Four 44 Forty Four

45 Forty Five 45 Forty Five 45 Forty Five 45 Forty Five

46 Forty Six 46 Forty Six 46 Forty Six 46 Forty Six

47 Forty Seven 47 Forty Seven 47 Forty Seven 47 Forty Seven

48 Forty Eight 48 Forty Eight 48 Forty Eight 48 Forty Eight

49 Forty Nine 49 Forty Nine 49 Forty Nine 49 Forty Nine

50 Fifty 50 Fifty 50 Fifty 50 Fifty

51 Fifty One 51 Fifty One 51 Fifty One 51 Fifty One

52 Fifty Two 52 Fifty Two 52 Fifty Two 52 Fifty Two

53 Fifty Three 53 Fifty Three 53 Fifty Three 53 Fifty Three

54 Fifty Four 54 Fifty Four 54 Fifty Four 54 Fifty Four

55 Fifty Five 55 Fifty Five 55 Fifty Five 55 Fifty Five

56 Fifty Six 56 Fifty Six 56 Fifty Six 56 Fifty Six

57 Fifty Seven 57 Fifty Seven 57 Fifty Seven 57 Fifty Seven

58 Fifty Eight 58 Fifty Eight 58 Fifty Eight 58 Fifty Eight

59 Fifty Nine 59 Fifty Nine 59 Fifty Nine 59 Fifty Nine

60 Sixty 60 Sixty 60 Sixty 60 Sixty

61 Sixty One 61 Sixty One 61 Sixty One 61 Sixty One

62 Sixty Two 62 Sixty Two 62 Sixty Two 62 Sixty Two

63 Sixty Three 63 Sixty Three 63 Sixty Three 63 Sixty Three

64 Sixty Four 64 Sixty Four 64 Sixty Four 64 Sixty Four

65 Sixty Five 65 Sixty Five 65 Sixty Five 65 Sixty Five

66 Sixty Six 66 Sixty Six 66 Sixty Six 66 Sixty Six

67 Sixty Seven 67 Sixty Seven 67 Sixty Seven 67 Sixty Seven

68 Sixty Eight 68 Sixty Eight 68 Sixty Eight 68 Sixty Eight

69 Sixty Nine 69 Sixty Nine 69 Sixty Nine 69 Sixty Nine

70 Seventy 70 Seventy 70 Seventy 70 Seventy

71 Seventy One 71 Seventy One 71 Seventy One 71 Seventy One

72 Seventy Two 72 Seventy Two 72 Seventy Two 72 Seventy Two

73 Seventy Three 73 Seventy Three 73 Seventy Three 73 Seventy Three

74 Seventy Four 74 Seventy Four 74 Seventy Four 74 Seventy Four

75 Seventy Five 75 Seventy Five 75 Seventy Five 75 Seventy Five

76 Seventy Six 76 Seventy Six 76 Seventy Six 76 Seventy Six

77 Seventy Seven 77 Seventy Seven 77 Seventy Seven 77 Seventy Seven

78 Seventy Eight 78 Seventy Eight 78 Seventy Eight 78 Seventy Eight

79 Seventy Nine 79 Seventy Nine 79 Seventy Nine 79 Seventy Nine

80 Eighty 80 Eighty 80 Eighty 80 Eighty

81 Eighty One 81 Eighty One 81 Eighty One 81 Eighty One

82 Eighty Two 82 Eighty Two 82 Eighty Two 82 Eighty Two

83 Eighty Three 83 Eighty Three 83 Eighty Three 83 Eighty Three

84 Eighty Four 84 Eighty Four 84 Eighty Four 84 Eighty Four

85 Eighty Five 85 Eighty Five 85 Eighty Five 85 Eighty Five

86 Eighty Six 86 Eighty Six 86 Eighty Six 86 Eighty Six

87 Eighty Seven 87 Eighty Seven 87 Eighty Seven 87 Eighty Seven

88 Eighty Eight 88 Eighty Eight 88 Eighty Eight 88 Eighty Eight

89 Eighty Nine 89 Eighty Nine 89 Eighty Nine 89 Eighty Nine

90 Ninety 90 Ninety 90 Ninety 90 Ninety

91 Ninety One 91 Ninety One 91 Ninety One 91 Ninety One

92 Ninety Two 92 Ninety Two 92 Ninety Two 92 Ninety Two

93 Ninety Three 93 Ninety Three 93 Ninety Three 93 Ninety Three

94 Ninety Four 94 Ninety Four 94 Ninety Four 94 Ninety Four

95 Ninety Five 95 Ninety Five 95 Ninety Five 95 Ninety Five

96 Ninety Six 96 Ninety Six 96 Ninety Six 96 Ninety Six

97 Ninety Seven 97 Ninety Seven 97 Ninety Seven 97 Ninety Seven

98 Ninety Eight 98 Ninety Eight 98 Ninety Eight 98 Ninety Eight

99 Ninety Nine 99 Ninety Nine 99 Ninety Nine 99 Ninety Nine

100 One Hundred 100 One Hundred 100 One Hundred 100 One Hundred

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Renovation of EDC Hostel Building at Hyderabad SS

Specification No: Ref: SR-I/C&M/WC-4460/2025 Rfx no.: 5002004923

Enter the details of the bidder below:

Specify type of Bidder Sole Bidder

Name of the Bidder TRUE

Address of Registered Office TRUE

Mobile no. +91 TRUE

Printed Name TRUE

Designation TRUE

Place TRUE False

#REF! ATTACHMENT-10

Name : #REF! #REF!

Address : #REF! #REF!

Integrity Pact is annexed herewith this Volume.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Between 0 #REF!

Power Grid Corporation of India Limited 0 #REF!

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!

"POWERGRID", #REF! #REF!

0 #REF! having its Registered Office at ,

hereinafter referred to as

"The Bidder/Contractor"

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 1 of 8

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 2 of 8

during his participation in the tender process and during the contract execution :

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Integrity Pact Page 8 of 8

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only EURO Four Thousand Nine Hundred Sixty Only RMB Ten Thousand Three Hundred Fifty Two Only INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

85 Eighty Five 60 Sixty 52 Fifty Two 47 Forty Seven

8 Eight Hundred 9 Nine Hundred 3 Three Hundred 6 Six Hundred

55 Fifty Five Thousand 4 Four Thousand 10 Ten Thousand 91 Ninety One Thousand 0 0 0 0 0 plus

1 One Lac 0 0 6 Six Lac 0 0 0 0 1

1 One 1 One 1 One 1 One 0 0 1 0 1

2 Two 2 Two 2 Two 2 Two 0 0 1 1 0

3 Three 3 Three 3 Three 3 Three 0 0 1 1 1

4 Four 4 Four 4 Four 4 Four 0 1 0 0 0

5 Five 5 Five 5 Five 5 Five 0 1 0 0 1

6 Six 6 Six 6 Six 6 Six 0 1 0 1 0

7 Seven 7 Seven 7 Seven 7 Seven 0 1 0 1 1

8 Eight 8 Eight 8 Eight 8 Eight 0 1 1 0 0

9 Nine 9 Nine 9 Nine 9 Nine 0 1 1 0 1

10 Ten 10 Ten 10 Ten 10 Ten 0 1 1 1 0

11 Eleven 11 Eleven 11 Eleven 11 Eleven 1 1 1 1 1 USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

12 Twelve 12 Twelve 12 Twelve 12 Twelve

13 Thirteen 13 Thirteen 13 Thirteen 13 Thirteen

14 Fourteen 14 Fourteen 14 Fourteen 14 Fourteen

15 Fifteen 15 Fifteen 15 Fifteen 15 Fifteen

16 Sixteen 16 Sixteen 16 Sixteen 16 Sixteen 0 0 0 0 0 +

17 Seventeen 17 Seventeen 17 Seventeen 17 Seventeen 0 0 0 0 1 /- +

18 Eighteen 18 Eighteen 18 Eighteen 18 Eighteen 0 0 0 1 0 /-

19 Nineteen 19 Nineteen 19 Nineteen 19 Nineteen 0 0 0 1 1

20 Twenty 20 Twenty 20 Twenty 20 Twenty 0 0 1 0 0

21 Twenty One 21 Twenty One 21 Twenty One 21 Twenty One 0 0 1 0 1

22 Twenty Two 22 Twenty Two 22 Twenty Two 22 Twenty Two 0 0 1 1 0

23 Twenty Three 23 Twenty Three 23 Twenty Three 23 Twenty Three 0 0 1 1 1

24 Twenty Four 24 Twenty Four 24 Twenty Four 24 Twenty Four 0 1 0 0 0

25 Twenty Five 25 Twenty Five 25 Twenty Five 25 Twenty Five 0 1 0 0 1

26 Twenty Six 26 Twenty Six 26 Twenty Six 26 Twenty Six 0 1 0 1 0

27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 0 1 0 1 1

28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 0 1 1 0 0

29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 0 1 1 0 1

30 Thirty 30 Thirty 30 Thirty 30 Thirty 0 1 1 1 0

31 Thirty One 31 Thirty One 31 Thirty One 31 Thirty One 1 1 1 1 1 USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

32 Thirty Two 32 Thirty Two 32 Thirty Two 32 Thirty Two

33 Thirty Three 33 Thirty Three 33 Thirty Three 33 Thirty Three

34 Thirty Four 34 Thirty Four 34 Thirty Four 34 Thirty Four

35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr

36 Thirty Six 36 Thirty Six 36 Thirty Six 36 Thirty Six

37 Thirty Seven 37 Thirty Seven 37 Thirty Seven 37 Thirty Seven

38 Thirty Eight 38 Thirty Eight 38 Thirty Eight 38 Thirty Eight

39 Thirty Nine 39 Thirty Nine 39 Thirty Nine 39 Thirty Nine

40 Forty 40 Forty 40 Forty 40 Forty

41 Forty One 41 Forty One 41 Forty One 41 Forty One

42 Forty Two 42 Forty Two 42 Forty Two 42 Forty Two

43 Forty Three 43 Forty Three 43 Forty Three 43 Forty Three

44 Forty Four 44 Forty Four 44 Forty Four 44 Forty Four

45 Forty Five 45 Forty Five 45 Forty Five 45 Forty Five

46 Forty Six 46 Forty Six 46 Forty Six 46 Forty Six

47 Forty Seven 47 Forty Seven 47 Forty Seven 47 Forty Seven

48 Forty Eight 48 Forty Eight 48 Forty Eight 48 Forty Eight

49 Forty Nine 49 Forty Nine 49 Forty Nine 49 Forty Nine

50 Fifty 50 Fifty 50 Fifty 50 Fifty

51 Fifty One 51 Fifty One 51 Fifty One 51 Fifty One

52 Fifty Two 52 Fifty Two 52 Fifty Two 52 Fifty Two

53 Fifty Three 53 Fifty Three 53 Fifty Three 53 Fifty Three

54 Fifty Four 54 Fifty Four 54 Fifty Four 54 Fifty Four

55 Fifty Five 55 Fifty Five 55 Fifty Five 55 Fifty Five

56 Fifty Six 56 Fifty Six 56 Fifty Six 56 Fifty Six

57 Fifty Seven 57 Fifty Seven 57 Fifty Seven 57 Fifty Seven

58 Fifty Eight 58 Fifty Eight 58 Fifty Eight 58 Fifty Eight

59 Fifty Nine 59 Fifty Nine 59 Fifty Nine 59 Fifty Nine

60 Sixty 60 Sixty 60 Sixty 60 Sixty

61 Sixty One 61 Sixty One 61 Sixty One 61 Sixty One

62 Sixty Two 62 Sixty Two 62 Sixty Two 62 Sixty Two

63 Sixty Three 63 Sixty Three 63 Sixty Three 63 Sixty Three

64 Sixty Four 64 Sixty Four 64 Sixty Four 64 Sixty Four

65 Sixty Five 65 Sixty Five 65 Sixty Five 65 Sixty Five

66 Sixty Six 66 Sixty Six 66 Sixty Six 66 Sixty Six

67 Sixty Seven 67 Sixty Seven 67 Sixty Seven 67 Sixty Seven

68 Sixty Eight 68 Sixty Eight 68 Sixty Eight 68 Sixty Eight

69 Sixty Nine 69 Sixty Nine 69 Sixty Nine 69 Sixty Nine

70 Seventy 70 Seventy 70 Seventy 70 Seventy

71 Seventy One 71 Seventy One 71 Seventy One 71 Seventy One

72 Seventy Two 72 Seventy Two 72 Seventy Two 72 Seventy Two

73 Seventy Three 73 Seventy Three 73 Seventy Three 73 Seventy Three

74 Seventy Four 74 Seventy Four 74 Seventy Four 74 Seventy Four

75 Seventy Five 75 Seventy Five 75 Seventy Five 75 Seventy Five

76 Seventy Six 76 Seventy Six 76 Seventy Six 76 Seventy Six

77 Seventy Seven 77 Seventy Seven 77 Seventy Seven 77 Seventy Seven

78 Seventy Eight 78 Seventy Eight 78 Seventy Eight 78 Seventy Eight

79 Seventy Nine 79 Seventy Nine 79 Seventy Nine 79 Seventy Nine

80 Eighty 80 Eighty 80 Eighty 80 Eighty

81 Eighty One 81 Eighty One 81 Eighty One 81 Eighty One

82 Eighty Two 82 Eighty Two 82 Eighty Two 82 Eighty Two

83 Eighty Three 83 Eighty Three 83 Eighty Three 83 Eighty Three

84 Eighty Four 84 Eighty Four 84 Eighty Four 84 Eighty Four

85 Eighty Five 85 Eighty Five 85 Eighty Five 85 Eighty Five

86 Eighty Six 86 Eighty Six 86 Eighty Six 86 Eighty Six

87 Eighty Seven 87 Eighty Seven 87 Eighty Seven 87 Eighty Seven

88 Eighty Eight 88 Eighty Eight 88 Eighty Eight 88 Eighty Eight

89 Eighty Nine 89 Eighty Nine 89 Eighty Nine 89 Eighty Nine

90 Ninety 90 Ninety 90 Ninety 90 Ninety

91 Ninety One 91 Ninety One 91 Ninety One 91 Ninety One

92 Ninety Two 92 Ninety Two 92 Ninety Two 92 Ninety Two

93 Ninety Three 93 Ninety Three 93 Ninety Three 93 Ninety Three

94 Ninety Four 94 Ninety Four 94 Ninety Four 94 Ninety Four

95 Ninety Five 95 Ninety Five 95 Ninety Five 95 Ninety Five

96 Ninety Six 96 Ninety Six 96 Ninety Six 96 Ninety Six

97 Ninety Seven 97 Ninety Seven 97 Ninety Seven 97 Ninety Seven

98 Ninety Eight 98 Ninety Eight 98 Ninety Eight 98 Ninety Eight

99 Ninety Nine 99 Ninety Nine 99 Ninety Nine 99 Ninety Nine

100 One Hundred 100 One Hundred 100 One Hundred 100 One Hundred

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Renovation of EDC Hostel Building at Hyderabad SS

Schedule-I : DSR Scheduled Items

Bidder’s Name and Address (Sole Bidder) : 0 Contract Services

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

0 Kavadiguda Main Raod, Secunderabad - 500080

All prices are in INR

Sl. No. DSR 2023 Ref No: Service Number SAC (Service Accounting Codes) Whether SAC in column ‘4’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘6’ is confirmed. If not indicate applicable rate of GST # Description (DSR'23 Items- Civil Works) Unit Quantity Unit Erection Charges as per DSR incl. GST Unit Erection Charges as per DSR excl. GST Unit Erection Charges incl. Escl.@3% excluding GST Quoted rates excl. GST (as per Quoted Percentage) GST % Amount as per DSR excluding GST GST Quoted Amount excluding GST GST on Quoted Amount

Part-I CIVIL SCHEDULE ITEMS

SUB HEAD : 1.0 CARRIAGE OF MATERIALS

1 1.1.1 CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking Lime, moorum, building rubbish up to 2Km cum 72.00 196.66 166.66 171.66 171.66 18.00% 12,359.52 2,224.71 12,359.52 2,224.71

2 1.1.2 CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking Earth Up to 2 Km cum 4.00 245.82 208.32 214.57 214.57 18.00% 858.28 154.49 858.28 154.49

SUB HEAD : 2.0 EARTH WORK

3 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m nin width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. cum 40.00 260.30 220.59 227.21 227.21 18.00% 9,088.40 1,635.91 9,088.40 1,635.91

4 2.10.1.2 Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m: All kinds of soil. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre 25.00 352.15 298.43 307.39 307.39 18.00% 7,684.75 1,383.26 7,684.75 1,383.26

5 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. cum 40.00 196.00 166.10 171.08 171.08 18.00% 6,843.20 1,231.78 6,843.20 1,231.78

6 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litre 20.00 234.75 198.94 204.91 204.91 18.00% 4,098.20 737.68 4,098.20 737.68

SUB HEAD : 4.0 CONCRETE WORK

7 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). cum 23.00 6,812.00 5,772.88 5946.07 5,946.07 18.00% 136,759.61 24,616.73 136,759.61 24,616.73

8 4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). cum 1.00 9,895.20 8,385.76 8637.34 8,637.34 18.00% 8,637.34 1,554.72 8,637.34 1,554.72

9 4.3.1 Centering and shuttering including strutting,propping etc. and removal of form work for : Foundations, footings, bases for columns sqm 9.00 392.15 332.33 342.30 342.30 18.00% 3,080.70 554.53 3,080.70 554.53

10 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification per bag of 50kg Cement used 26.00 18.15 15.38 15.84 15.84 18.00% 411.84 74.13 411.84 74.13

11 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-lll) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. sqm 129.00 749.30 635.00 654.05 654.05 18.00% 84,372.45 15,187.04 84,372.45 15,187.04

SUB HEAD : 5.0 REINFORCED CEMENT CONCRETE

12 5.12 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). cum 12.00 10,585.90 8,971.10 9240.23 9,240.23 18.00% 110,882.76 19,958.90 110,882.76 19,958.90

13 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 965.00 107.85 91.40 94.14 94.14 18.00% 90,845.10 16,352.12 90,845.10 16,352.12

SUB HEAD : 6.0 MASONRY WORK

14 6.15 Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry. sqm 1.00 104.80 88.81 91.48 91.48 18.00% 91.48 16.47 91.48 16.47

SUB HEAD : 8.0 CLADDING WORK

15 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red. Area of slab upto 0.50 sqm sqm 28.00 5,413.50 4,587.71 4725.34 4,725.34 18.00% 132,309.52 23,815.71 132,309.52 23,815.71

16 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red. Area of slab over 0.50 sqm. sqm 65.00 5,136.30 4,352.80 4483.38 4,483.38 18.00% 291,419.70 52,455.55 291,419.70 52,455.55

17 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. metre 276.00 510.95 433.01 446.00 446.00 18.00% 123,096.00 22,157.28 123,096.00 22,157.28

18 8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. metre 6.00 568.55 481.82 496.28 496.28 18.00% 2,977.68 535.98 2,977.68 535.98

19 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. each 31.00 978.70 829.41 854.29 854.29 18.00% 26,482.99 4,766.94 26,482.99 4,766.94

SUB HEAD : 9.0 WOOD AND P.V.C. WORK

20 9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood. cum 0.50 142,949.70 121,143.81 124778.13 124,778.13 18.00% 62,389.07 11,230.03 62,389.07 11,230.03

21 9.7.7.1 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm). sqm 20.00 2,241.80 1,899.83 1956.83 1,956.83 18.00% 39,136.60 7,044.59 39,136.60 7,044.59

22 9.7.7.2 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). sqm 131.00 2,600.45 2,203.77 2269.88 2,269.88 18.00% 297,354.28 53,523.77 297,354.28 53,523.77

23 9.12 Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). sqm 20.00 176.40 149.49 153.98 153.98 18.00% 3,079.60 554.33 3,079.60 554.33

24 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part |) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

24.1 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 10.00 3,473.85 2,943.94 3032.26 3,032.26 18.00% 30,322.60 5,458.07 30,322.60 5,458.07

24.2 9.20.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws sqm 23.00 2,819.25 2,389.19 2460.87 2,460.87 18.00% 56,600.01 10,188.00 56,600.01 10,188.00

25 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). sqm 23.00 462.35 391.82 403.58 403.58 18.00% 9,282.34 1,670.82 9,282.34 1,670.82

26 9.61.1 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel chromium plating grade 1 as per IS: 1068 and fixing with necessary screws etc., complete. Overall width 35 mm metre 42.00 336.45 285.13 293.68 293.68 18.00% 12,334.56 2,220.22 12,334.56 2,220.22

27 9.71.2 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 100x60x2.50 mm each 30.00 106.35 90.13 92.83 92.83 18.00% 2,784.90 501.28 2,784.90 501.28

28 9.79.2 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 50 mm each 40.00 356.75 302.33 311.40 311.40 18.00% 12,456.00 2,242.08 12,456.00 2,242.08

29 9.114.2 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type) each 200.00 39.70 33.64 34.65 34.65 18.00% 6,930.00 1,247.40 6,930.00 1,247.40

30 9.165.1 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125mm each 216.00 119.20 101.02 104.05 104.05 18.00% 22,474.80 4,045.46 22,474.80 4,045.46

31 9.165.2 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 100mm each 50.00 90.45 76.65 78.95 78.95 18.00% 3,947.50 710.55 3,947.50 710.55

SUB HEAD : 10.0 STEEL WORK

32 10.25.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. kg 2286.00 172.60 146.27 150.66 150.66 18.00% 344,408.76 61,993.58 344,408.76 61,993.58

33 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Kg 200.00 772.40 654.58 674.21 674.21 18.00% 134,842.00 24,271.56 134,842.00 24,271.56

SUB HEAD : 11.0 FLOORING

34 11.41A.1.3 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 1200 mm sqm 458.00 1,577.15 1,336.57 1376.66 1,376.66 18.00% 630,510.28 113,491.85 630,510.28 113,491.85

SUB HEAD : 12.0 ROOFING

35 12.21.1 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase metre 202.00 305.15 258.60 266.36 266.36 18.00% 53,804.72 9,684.85 53,804.72 9,684.85

36 12.22 Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. each 22.00 298.25 252.75 260.34 260.34 18.00% 5,727.48 1,030.95 5,727.48 1,030.95

37 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter metre 113.00 377.40 319.83 329.43 329.43 18.00% 37,225.59 6,700.61 37,225.59 6,700.61

38 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 0.00

39 12.43.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm each 96.00 371.30 314.66 324.10 324.10 18.00% 31,113.60 5,600.45 31,113.60 5,600.45

40 12.45.3 Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.]. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.|. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board sqm 70.00 1,529.10 1,295.85 1334.72 1,334.72 18.00% 93,430.40 16,817.47 93,430.40 16,817.47

41 12.46 Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. each 22.00 84.55 71.65 73.80 73.80 18.00% 1,623.60 292.25 1,623.60 292.25

42 12.52.3 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part | and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. sqm 70.00 2,215.15 1,877.25 1933.56 1,933.56 18.00% 135,349.20 24,362.86 135,349.20 24,362.86

SUB HEAD : 13.0 FINISHING

44 13.5.2 15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand) sqm 25.00 395.35 335.04 345.09 345.09 18.00% 8,627.25 1,552.91 8,627.25 1,552.91

45 13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) sqm 125.00 425.55 360.64 371.45 371.45 18.00% 46,431.25 8,357.63 46,431.25 8,357.63

46 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand). sqm 419.00 518.55 439.45 452.63 452.63 18.00% 189,651.97 34,137.35 189,651.97 34,137.35

47 13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Per bag of 50kg cement used in the mix 53.00 22.10 18.73 19.29 19.29 18.00% 1,022.37 184.03 1,022.37 184.03

48 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm). sqm 1075.00 171.10 145.00 149.35 149.35 18.00% 160,551.25 28,899.23 160,551.25 28,899.23

49 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture sqm 467.00 226.25 191.74 197.49 197.49 18.00% 92,227.83 16,601.01 92,227.83 16,601.01

50 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 442.00 156.05 132.25 136.21 136.21 18.00% 60,204.82 10,836.87 60,204.82 10,836.87

51 13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats sqm 2210.00 142.80 121.02 124.65 124.65 18.00% 275,476.50 49,585.77 275,476.50 49,585.77

52 13.85.1 Applying priming coats with primer of approved brand and manufacture,having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre sqm 84.00 70.35 59.62 61.41 61.41 18.00% 5,158.44 928.52 5,158.44 928.52

53 13.85.3 Applying priming coats with primer of approved brand and manufacture,having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre sqm 2210.00 73.95 62.67 64.55 64.55 18.00% 142,655.50 25,677.99 142,655.50 25,677.99

54 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. sqm 3285.00 25.15 21.31 21.95 21.95 18.00% 72,105.75 12,979.04 72,105.75 12,979.04

SUB HEAD : 14.0 REPAIRS TO BUILDING

56 14.75 Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. sqm 50.00 670.95 568.60 585.66 585.66 18.00% 29,283.00 5,270.94 29,283.00 5,270.94

57 14.77 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia upto 300 mm metre 50.00 340.75 288.77 297.43 297.43 18.00% 14,871.50 2,676.87 14,871.50 2,676.87

58 14.78 Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. sqm 5.00 422.70 358.22 368.97 368.97 18.00% 1,844.85 332.07 1,844.85 332.07

59 14.79 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. each 15.00 433.75 367.58 378.61 378.61 18.00% 5,679.15 1,022.25 5,679.15 1,022.25

60 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. each 22.00 134.10 113.64 117.05 117.05 18.00% 2,575.10 463.52 2,575.10 463.52

SUB HEAD : 15.0 DISMANTLING AND DEMOLISHING

61 15.2.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer -in - charge. Nominal concrete 1:4:8 or leaner mix (including equivalent design mix). cum 9.00 1,503.60 1,274.24 1312.46 1,312.46 18.00% 11,812.14 2,126.19 11,812.14 2,126.19

62 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar cum 12.00 2,060.20 1,745.93 1798.31 1,798.31 18.00% 21,579.72 3,884.35 21,579.72 3,884.35

63 15.18 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. Kg 200.00 5.65 4.79 4.93 4.93 18.00% 986.00 177.48 986.00 177.48

64 15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm sqm 548.00 73.40 62.20 64.07 64.07 18.00% 35,110.36 6,319.86 35,110.36 6,319.86

65 15.40.1 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : Thickness upto 40 mm sqm 40.00 289.30 245.17 252.52 252.52 18.00% 10,100.80 1,818.14 10,100.80 1,818.14

66 15.42 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

67 15.51 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. each 22.00 958.75 812.50 836.88 836.88 18.00% 18,411.36 3,314.04 18,411.36 3,314.04

68 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. each 22.00 112.05 94.96 97.81 97.81 18.00% 2,151.82 387.33 2,151.82 387.33

69 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. sqm 372.00 54.65 46.31 47.70 47.70 18.00% 17,744.40 3,193.99 17,744.40 3,193.99

70 15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. sqm 189.00 56.35 47.75 49.19 49.19 18.00% 9,296.91 1,673.44 9,296.91 1,673.44

SUB HEAD : 16.0 ROAD WORK

71 16.68 Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. sqm 60.00 972.00 823.73 848.44 848.44 18.00% 50,906.40 9,163.15 50,906.40 9,163.15

72 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). cum 12.00 10,117.60 8,574.24 8831.46 8,831.46 18.00% 105,977.52 19,075.95 105,977.52 19,075.95

SUB HEAD : 17.0 SANITARY INSTALLATIONS

73 17.10.1.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board. 510x1040 mm bowl depth 225 mm each 4.00 7,514.65 6,368.35 6559.40 6,559.40 18.00% 26,237.60 4,722.77 26,237.60 4,722.77

74 17.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe: 40 mm dia each 4.00 119.55 101.31 104.35 104.35 18.00% 417.40 75.13 417.40 75.13

SUB HEAD : 18.0 WATER SUPPLY

75 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall.

76 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

77 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work

78 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per Litre 15500.00 11.00 9.32 9.60 9.60 18.00% 148,800.00 26,784.00 148,800.00 26,784.00

SUB HEAD : 19.0 DRAINAGE

79 19.4.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. each 22.00 2,707.65 2,294.62 2363.46 2,363.46 18.00% 51,996.12 9,359.30 51,996.12 9,359.30

80 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

81 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 4.00 12,770.55 10,822.50 11147.18 11,147.18 18.00% 44,588.72 8,025.97 44,588.72 8,025.97

21.0 ALUMINIUM WORK

82 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

82.1 21.1.1.2 For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 372.00 530.90 449.92 463.41 463.41 18.00% 172,388.52 31,029.93 172,388.52 31,029.93

82.2 21.1.2.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 79.00 634.45 537.67 553.80 553.80 18.00% 43,750.20 7,875.04 43,750.20 7,875.04

SUB HEAD : 22.0 WATER PROOFING

83 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). sqm 168.00 769.60 652.20 671.77 671.77 18.00% 112,857.36 20,314.32 112,857.36 20,314.32

84 22.7.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: With average thickness of 120 mm and minimum thickness at khurra as 65 mm. sqm 667.00 1,684.60 1,427.63 1470.46 1,470.46 18.00% 980,796.82 176,543.43 980,796.82 176,543.43

85 22.14.1 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cum 4.00 8,042.30 6,815.51 7019.97 7,019.97 18.00% 28,079.88 5,054.38 28,079.88 5,054.38

86 22.23A Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge. sqm 222.00 447.35 379.11 390.48 390.48 18.00% 86,686.56 15,603.58 86,686.56 15,603.58

26.0 NEW TECHNOLOGIES AND MATERIALS

87 26.28.2 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 50mm average thickness sqm 667.00 256.35 217.25 223.76 223.76 18.00% 149,247.92 26,864.63 149,247.92 26,864.63

Total of Scheduled Items- Civil 6,677,440.45 1,201,939.28 6,677,440.45 1,201,939.28

SCHEDULE ITEMS (Electricals)

1 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C Point 240.00 1,467.00 1,309.82 1,309.82 18.00% 314,356.8000 56,584.2240 314,356.80 56,584.22

2 1.55.3 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C Point 18.00 858.00 766.07 766.07 18.00% 13,789.2600 2,482.0668 13,789.26 2,482.07

3 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Point 18.00 1,562.00 1,394.64 1,394.64 18.00% 25,103.5200 4,518.6336 25,103.52 4,518.63

4 1.14.2 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire metre 1,670.00 275.00 245.54 245.54 18.00% 410,051.8000 73,809.3240 410,051.80 73,809.32

5 1.14.3 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire metre 480.00 334.00 298.21 298.21 18.00% 143,140.8000 25,765.3440 143,140.80 25,765.34

6 1.53.1 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable metre 400.00 57.00 50.89 50.89 18.00% 20,356.0000 3,664.0800 20,356.00 3,664.08

7 1.18.2 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair metre 375.00 38.00 33.93 33.93 18.00% 12,723.7500 2,290.2750 12,723.75 2,290.28

8 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. metre 100.00 47.00 41.96 41.96 18.00% 4,196.0000 755.2800 4,196.00 755.28

9 1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm metre 480.00 128.00 114.29 114.29 18.00% 54,859.2000 9,874.6560 54,859.20 9,874.66

10 1.21.2 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm metre 200.00 145.00 129.46 129.46 18.00% 25,892.0000 4,660.5600 25,892.00 4,660.56

11 1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch each 410.00 103.00 91.96 91.96 18.00% 37,703.6000 6,786.6480 37,703.60 6,786.65

12 1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch each 75.00 156.00 139.29 139.29 18.00% 10,446.7500 1,880.4150 10,446.75 1,880.42

13 1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet each 147.00 122.00 108.93 108.93 18.00% 16,012.7100 2,882.2878 16,012.71 2,882.29

14 1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet each 79.00 197.00 175.89 175.89 18.00% 13,895.3100 2,501.1558 13,895.31 2,501.16

15 1.24.6 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet each 25.00 148.00 132.14 132.14 18.00% 3,303.5000 594.6300 3,303.50 594.63

16 1.24.7 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet each 22.00 148.00 132.14 132.14 18.00% 2,907.0800 523.2744 2,907.08 523.27

17 1.24.8 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Bell push each 19.00 140.00 125.00 125.00 18.00% 2,375.0000 427.5000 2,375.00 427.50

18 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. each 56.00 369.00 329.46 329.46 18.00% 18,449.7600 3,320.9568 18,449.76 3,320.96

19 1.27.1 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 1 or 2 Module (75mmX75mm) each 75.00 298.00 266.07 266.07 18.00% 19,955.2500 3,591.9450 19,955.25 3,591.95

20 1.27.2 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 3 Module (100mmX75mm) each 30.00 327.00 291.96 291.96 18.00% 8,758.8000 1,576.5840 8,758.80 1,576.58

21 1.27.3 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 4 Module (125mmX75mm) each 136.00 343.00 306.25 306.25 18.00% 41,650.0000 7,497.0000 41,650.00 7,497.00

22 1.27.4 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 6 Module (200mmX75mm) each 104.00 402.00 358.93 358.93 18.00% 37,328.7200 6,719.1696 37,328.72 6,719.17

23 1.14.4 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire metre 2,979.00 439.00 391.96 391.96 18.00% 1,167,648.8400 210,176.7912 1,167,648.84 210,176.79

24 2.10.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole each 40.00 256.00 228.57 228.57 18.00% 9,142.8000 1,645.7040 9,142.80 1,645.70

25 2.2.1 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A,16KA,TPMCCB each 8.00 3,777.00 3,372.32 3,372.32 18.00% 26,978.5600 4,856.1408 26,978.56 4,856.14

26 2.2.16 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 250 A,36KA,FPMCCB each 1.00 17,510.00 15,633.93 15,633.93 18.00% 15,633.9300 2,814.1074 15,633.93 2,814.11

Total of Scheduled Items- Electrical 2,456,659.74 442,198.75 2,456,659.74 442,198.75

Total of Scheduled Items- Civil + Electrical (Schedule-I) 9,134,100.19 1,644,138.03 9,134,100.19 1,644,138.03

Percentage (%) above/below +/- on DSR 2023 Rates excluding GST mentioned above (to be quoted by Bidder) 0.00%

Total of Schedule I excluding GST considering offered % age 9,134,100.19

Total GST 1,644,138.03

As the %variation w.r.t total DSR Amount cell left Blank the bid is considered as Non-responsive

Renovation of EDC Hostel Building at Hyderabad SS

Schedule-II : Non-Scheduled Items

Bidder’s Name 0 To:

Address : 0 Contract Services

0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

Kavadiguda Main Raod, Secunderabad - 500080

Sl. No. Service Number SAC Code Whether SAC in column ‘2’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘6’ is confirmed. If not indicate applicable rate of GST # Description (Non Schedule Items) Unit Quantity Unit Rate without GST Total Amount excl. GST GST Remarks 149

A NON-SCHEDULE ITEMS: CIVIL

NS_1 Removing of cinder 18% Removing existing filling material like cinder from sunken flooring of toilet at any level & stacking at marked place all complete as per direction of Engineer-in-charge. cum 40.00 0.00 0.00

NS_2 Wall tiles dismantaling 18% Dismantling tile work in wall laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 08 mm to 25 mm, complete as per direction of Engineer-in-charge. sqm 310.00 0.00 0.00

NS_3 Cupboard/door/window shutter with choukhat dismantaling 18% Dismantling doors, windows, Cupboard and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Any size Each 21.00 0.00 0.00

NS_4 Granite stone dismantaling 18% Dismantling Grainte stone slab laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete as per direction of Engineer-in-charge. sqm 92.00 0.00 0.00

NS_5 Wash basin dismantaling 18% Removing/ Dismantling of wash basin/ urinal pot along with accessories of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead, complete as per direction of Engineer-in-charge. each 22.00 0.00 0.00

NS_6 Dismantling PVC pipe 18% Dismantling PVC/CPVC/UPVC pipe including cutting wall/ trenches/external/Internal work, concealed/exposed on wall after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : any dia metre 110.00 0.00 0.00

NS_7 Dismantling GI pipe 18% Dismantling G.I pipe including cutting wall/ trenches/external/Internal work, concealed/exposed on wall after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : any dia metre 242.00 0.00 0.00

NS_8 Rubber flooring for Gymnasium 18% Providing and fixing Anti-static, Anti-slip even when wet surface, durable, flexible Rubber flooring suitable for GYM/Sports complex of size 500 x 500 mm minimum with thickness of 15 mm should be laid on the top of the PCC in desired pattern or as per the instruction directed by an engineer incharge. Make: Vinex/Tugania or equivalent. SQFT 724.00 0.00 0.00

NS_9 UPVC Window 18% Providing and fixing factory made uPVC glazed/wire mesh/sliding(Two/Three track)/slidingcumfixed/fixed/casement/louverscumfixed/louverscumcasement/any position windows/doors with multipoint locking system comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds sqm 157.00 0.00 0.00

NS_10 Kadapa Stone 18% Providing and fixing 40 mm thick kadapa stone slab to used as horizontal base for Granite slab/shleves over it, in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade, all complete as per the direction of Engineer-in charge. : sqm 8.00 0.00 0.00

NS_11 Diluting & injecting chemical emulsion for anti termite 18% Diluting and injecting chemical emulsion (to be supplied under other item) for PRE-CONSTRUCTIONAL anti-termite treatment and creating a continuous chemical barrier under and around the columns pits, wall trenches, basement excavation, along the external perimeter of retaining wall, expansion joints, over top surface consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc., complete as per specifications. Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration. (cost of Chlorpyriphos/ Lindane emulsifiable concentrate shall be paid separately. Basement floor slab area of the building only shall be measured for payment) sqm 3,574.00 0.00 0.00

NS_12 Sunken filling with 40 mm dia pipe spout 18% Providing and placing cinder/brick bat or any light weight water absorbing materials filling to the sunk floors in toilets/kitchen sunks, well compacted carefully by hand beating to required slopes including consolidation,making hole or core to the beam/wall for providing 40mm dia PVC drain (spout pipe) pipe of required length, pipe should be fixed properly to the beam or wall with water proofing compound with cover the inlet pipe mouth with SS jali and packing with 40/20/10 mm stone aggregate with sufficent quantity. For toilet and Kitchen sunkun portions. Cum 40.00 0.00 0.00

NS_13 Brick work up to plinth 18% Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (75kg/sq.cm)in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand). Note: Fly ash brick of same class confirming to relevant IS code can also be used if clay bricks of designated class are not available. cum 21.00 0.00 0.00

NS_14 Brick work above plinth 18% Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (75kg/sq,cm) in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) Note: Fly ash brick of same class confirming to relevant IS code can also be used if clay bricks of designated class are not available. cum 23.00 0.00 0.00

NS_15 Half Brick work above plinth 18% Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (75kg/sq,cm) in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand). Note: Fly ash brick of same class confirming to relevant IS code can also be used if clay bricks of designated class are not available. sqm 1.00 0.00 0.00

NS_16 Chicken wire mesh for plaster 18% Providing & fixing chicken wire mesh 24 gauge at junctions of RCC and masonry walls including fixing in position, scaffolding etc. complete as directed by Engineer-in-charge. sqm 25.00 0.00 0.00

NS_17 Vetrifeid wall tiles size 600X1200 18% Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 1200 mm sqm 324.00 0.00 0.00

NS_18 Vetrifeid tiles size 600X1200 antiskid 18% Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge Vitrified tiles Matt/Antiskid finish of size. Size of Tile 600 x 1200 mm sqm 88.00 0.00 0.00

NS_19 Grouting of tiles 18% Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x1200 mm sqm 545.00 0.00 0.00

NS_20 SWR pipe 110 mm 18% Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592 Type B of PRICE/SUPREME/FINOLEX or equivalent make for drainage line including necessary fittings such as couplers, bends, tees, cross tees, cowls, 2way/3way junction of any degree,clamps, rubber packing ring, acess door etc. wherever required confirming to IS-14735, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose) (B) 110mm outer dia. metre 77.00 0.00 0.00

NS_21 SWR pipe 75 mm 18% Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592 Type B of PRICE/SUPREME/FINOLEX or equivalent make for drainage line including necessary fittings such as couplers, bends, tees, cross tees, cowls, 2way/3way junction of any degree,clamps, rubber packing ring, acess door etc. wherever required confirming to IS-14735, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose) (B) 75mm outer dia. metre 99.00 0.00 0.00

NS_22 Nahani/floor Trap 18% Providing, fixing, testing and commissioning uPVC SWR self cleaning Nahani trap, plain floor trap/ Multi floor trap etc. of 110 mm dia inlet and 75 mm outlet nominal dia. including fixing PVC reducer of 110mm dia. to 75 mm dia. and jointing with adhessive solvent cement including cost of cutting and making good the walls and floors at all levels etc. complete. each 44.00 0.00 0.00

NS_23 SWR Pipe 160 mm 18% Providing and fixing soil, waste and vent pipes with unplsticised rigid PVC 160mm dia pipes conforming IS 13592 Type B. all complete as directed by the Engineer in charge. metre 6.00 0.00 0.00

NS_24 Window SS jali for sliding 18% Providing and fixing stainless steel 304 grade mesh of average width of aperture 1.4 mm and nominal dia of wire 0.50 mm to uPVC/aluminium windows with suitable beading/clips a as per drawings and as directed by engineer in charge. The uPVC/aluminium section of windows shall be measured under relevant items. Actual area of mesh provided shall be measured for payment. sqm 131.00 0.00 0.00

NS_25 CPVC Ball Valve 25 mm dia 18% Providing and fixing CPVC Ball Valve 25 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. each 4.00 0.00 0.00

NS_26 CPVC Ball Valve 32 mm dia 18% Providing and fixing CPVC Ball Valve 32 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. each 4.00 0.00 0.00

NS_27 CPVC Ball Valve 40 mm dia 18% Providing and fixing CPVC Ball Valve 40 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. each 5.00 0.00 0.00

NS_28 CPVC Ball Valve 50 mm dia 18% Providing and fixing CPVC Ball Valve 50 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. each 3.00 0.00 0.00

NS_29 Making grooves 18% Forming a drip course/groove of uniform size from 12x12mm up to 25x15mm in the existing plastered/RCC surface using a hand cutter machine or a plaster band of mortar (1:3) to create a water-dropping/breaking point to the underlayer. The groove should be finished completely as per the direction of the Engineer-in-Charge. metre 42.00 0.00 0.00

NS_30 Repair of cracks 18% Open and widen the cracks to form a "V" shaped groove by using cutter and clean the crack thoroughly to free it from dust and loose particles. Apply approved crack seal to wall cracks including primer in the opened cracks, apply crack seal at least 3 cm on eithr side of the crack for better adhesion and apply additional coat of crack seal in case of severe dampness and apply putty wherever required for even surface of wall including all material and labour charges and as per the direction of engineer-in-charge metre 100.00 0.00 0.00

NS_31 SS steel curtain pipes 18% Providing and fixing stainless steel heavy type curtain rod having wall thickness of 0.75 to 1 mm, minimum 0.5 kg/m with two brackets/sider (heavy type) fixed with SS screws and PVC sleeves etc., wherever necessary complete : 25 MM dia Brackets and pipes materials shall be approved by engineer-in-charge. metre 95.00 0.00 0.00

NS_32 English Lettering 18% Supply and Installation of SS 304 grade Alphabets, Numbers & Symbols or Substation Name as shown in drawing at Out side Entrance wall/ above fron side of building wall of Size 1feet and depth of the letter shall be 40 mm. Enamel Colouring as per the drawing shall be included and all complete as per the direction of Engineer In charge. English each 26.00 0.00 0.00

Sanitary Fitting for toilets

NS_33 Wall Mixer with shower system with fittings 18% Providing and fixing premium quality C.P. brass wall mixer with provision of both hand shower and overhead shower complete with 115 mm long bend pipe on upper side, connecting legs & wall flanges,overhead shower 150x150mm rectangular shape single flow with shower arm 400 mm long chrome finish and all other fittings and fixtures complete all chrome finish including cuttings and making good the walls and floor wherever required as per approved quality & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :KUP-CHR-35117PM+ SHA-CHR-455L400 + OHS-CHR-1605 or equivalant specification. each 20.00 0.00 0.00

NS_34 WC Floor mounted with cistern 18% Providing and fixing premium quality white vitreous china floor mounted single peice water closet (European type W.C. pan) with seat and lid & 3-6 litre low level combined dual flushing cistern with s-trap 300, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : LYS-WHT-38851S300UFSMN or equivalant specification. each 20.00 0.00 0.00

NS_35 Table top Wash Basin all fittings 18% Providing and fixing premium quality over-counter table top wash basin of any shape minimum size 520X360X125 mm including Pillar cock Faucet over flow hole, standard C.P. bottel trap, union, Long Braided Hose and all chrome finish and making necessary holes for fixing of pillar coack with all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :FLS-WHT-5931+ KUP-CHR-35001PM + ALD-CHR-769L300X190 + ALD-CHR-803AB orequivalant specification. each 22.00 0.00 0.00

NS_36 Two way bib cock 18% Providing and fixing premium quality C.P. brass two way bib cock with cover plate as per approved quality 15 mm nominal bore & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : KUP-CHR-35041PM or equivalant specification. each 20.00 0.00 0.00

NS_37 Angle Valve 18% Providing and fixing premium quality C.P. brass angle valve with cover plate for WCs, Wash basin, health Faucet etc as per approved quality 15 mm nominal bore & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : KUP-CHR-35053PM or equivalant specification. each 44.00 0.00 0.00

NS_38 Health Fucet 18% Providing and fixing premium quality C.P. health Faucet with NRV (back flow preventer) of approved quality and make of the required length of flexible pipe upto the angle cock, clamp to hold the same, fixing on the wall / Glazed tiles with S.S screws etc complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : ALD-CHR-577 or equivalant specification. each 20.00 0.00 0.00

NS_39 Nipple 18% Providing and fixing C.P. Brass extension nipple heavy duty of approved make and quality as per direction of Engineer-in-charge. size 15mmx25 mm Make : Nirali/ Viking/Roca/Jaquar/Kohler or equivalant specification. each 66.00 0.00 0.00

NS_40 Stop Coack with Fiitings 18% Providing and fixing premium quality CP Brass concelead stop coack chrome finish with fitting sleeve, operating lever & adjustable wall flange with seal with Concealed Body of Flush Cock Suitable for 20mm Pipe Line with Protection Cap of standard shape as approved quality with all fittings and fixtures complete including cutting and making good the walls complete to in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :KUP-CHR-35083KPM + ALD-089 or equivalant specification. each 22.00 0.00 0.00

NS_41 Toilet paper Holder 18% Providing and fixing premium quality C.P. Toilet Paper Holder of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model: CPA-CHR-1153 or equivalant specification. each 20.00 0.00 0.00

NS_42 Towel rack 18% Providing and fixing premium quality C.P. towel Rack 600 mm long of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model :CPA-CHR-1181 orequivalant specification. each 20.00 0.00 0.00

NS_43 Shower Basket 18% Providing and fixing premium quality CP Brass shower basket small chrome finish of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :ACN-CHR-1177N or equivalant specification. each 20.00 0.00 0.00

NS_44 Towel Ring 18% Providing and fixing premium quality C.P. Towel ring square with flange of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model : ACN-CHR-35721P or equivalant specification. each 20.00 0.00 0.00

NS_45 Tumbler Holder 18% Providing and fixing premium quality CP Brass Tumbler holder of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AKP-CHR-35741P or equivalant specification. each 20.00 0.00 0.00

NS_46 Coat Hook 18% Providing and fixing premium quality CP Brass coat hook of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AKP-35761P or equivalant specification. each 20.00 0.00 0.00

NS_47 Soap dish Holder 18% Providing and fixing premium quality CP Brass Soap Dish holder of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AKP-CHR-35731P or equivalant specification. each 22.00 0.00 0.00

NS_48 Floor Long drain floor Jali 18% Providing and fixing 600X75X32 mm AISI 304 grade stainless steel matt finsh steel in any colour long floor drains consisting with tile inserting, drain cover, tray,cockroch trap and side hole (consisting in 5 parts) with jali in bottom of channel for waste pipe of floor or Nahani trap complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Lipika article no-1056 or Nirali/Lipka/ Viking/Roca/Jaquar/Kohler or equivalant specification. Make Lipka article no-1056 (weight not less than 1.2kg) each 20.00 0.00 0.00

NS_49 SS jali for nahani for toilet with cockrage trap 18% Providing and fixing 125x125mm stainless (SS304) matt finsh steel jali (grating) with or without hole consisting four five system with Cockroach Trap, and frame for waste pipe of floor or Nahani trap complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Lipika artical no-1010 or Nirali/Lipka/ Viking/Roca/Jaquar/Kohler or equivalant specification. each 40.00 0.00 0.00

NS_50 Kitchen Sink tape 18% P&F CP Brass wall mounted Sink cock with regular swinging spout & operating knob with wall flanges. 15mm Nominal Bore. The Jaguar Make model No. FLR-CHR-5347SD or equivalant specification. each 4.00 0.00 0.00

NS_51 Washing Machine Tap 18% Providing and fixing CP Brass Tap of reputed brand suitable for fixing of washing machine. Make Jaquar COP-CHR-049PM or equivalant specification. each 3.00 0.00 0.00

NS_52 Automatic Soap Dispenser 18% Providing and fixing premium quality Automatic Soap Dispenser of standard shape and size with wall bracket as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge.Make : Jaquar Model : SDR-BLC-DJ0160ASN or equivalant specification. each 3.00 0.00 0.00

NS_53 Hand drier 18% Providing and fixing premium quality no touch operating, fully hygienic hand drier including providing necessary brackets, cable from drier to plug as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : HDR-SSF-AK2807 or equivalant specification. each 1.00 0.00 0.00

NS_54 Mirror 18% Providing and fixing premium quality bevelled edge mirror of any size made of superior glass as approved quality complete with 25mm dia SS studs, washers etc complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : AIS/saint gobain/ Roca/Jaquar/Kohler or equivalant specification. sqm 11.00 0.00 0.00

Door & Cupboard Hardware fitting

NS_55 Keyless with nob 18% Providing and fixing Premium stainless steel cylindrical locks 60 mm - Keyless type with nob on both sides for bathroom door shutters all complete as per manufacturers specification and direction of Engineer-in-charge. Make :Dorset/Dorma/Godrej or equivalent. Godrej make Premium Cylindrical Lock Pin Cylinder - Keyless 5PTC product code 9843 or equivalant specification. each 22.00 0.00 0.00

NS_56 Tower bolt 300mm 18% Providing and fixing premium quality matte finish Stainless steel tower bolts to required colour or shade, with necessary screws etc. complete : 300x10 mmmm complete as per manufacturers specification and direction of Engineer-in-charge. Make :Dorset/Dorma/Godrej or equivalant specification. Godrej make Tower Bolt or equivalant specification. each 90.00 0.00 0.00

NS_57 Rubber shock absorbers 18% Providing and fixing rubber shock absorbers of minimum 25 mm dia and 75 mm length to be fixed on back side of door including screws and nuts etc. all complete. each 40.00 0.00 0.00

NS_58 Door Aldrop 18% Providing and fixing premium quality matte finish Stainless steel door latch/aldrops to required colour or shade, with necessary screws etc. complete : 250X16 mm complete as per manufacturers specification and direction of Engineer-in-charge. Make :Dorset/Dorma/Godrej or equivalant specification. Godrej Make Aldrops SS product code 2282 or equivalant specification. each 136.00 0.00 0.00

NS_59 Door closer 18% Supply & installation of over head Godrej/Dorma make Hydraulic door closure as per direction of Engineer in Charge. Dorma/doorset/godrej or equivalant specification. each 25.00 0.00 0.00

NS_60 Floor Door Stopper 18% Providing and fixing premium quality matte finish Stainless steel hanging floor door rubber stopper, with necessary screws etc. complete as per manufacturers specification and direction of Engineer-in-charge. Make :Dorset/Dorma/Godrej or equivalant specification. each 25.00 0.00 0.00

NS_61 Tower bolt 100mm 18% Providing and fixing premium quality matte finish Stainless steel 304 grade tower bolts, ISI marked, to required colour or shade, with necessary screws etc. complete : 100x10 mmmm complete as per manufacturers specification and direction of Engineer-in-charge. Make :Dorset/Dorma/Godrej or equivalant specification. Godrej make Tower Bolt or equivalant specification. each 80.00 0.00 0.00

NS_62 WPC Door shutters 18% Providing and fixing factory made minimum 28 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size and design/pattern comprising of virgin polymer, calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives and resistance to spread of flame of with property of being termite/borer proof, water/moisture proof and fire retardant of approved brand and fixing with stainless steel butt hinges 4 nos of size 100x58x1.9 mm with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. Make-Qute/HDHMR Doors-NCL/Ecoste/Ecocell/Greenpannel/DEC Industries/Jamex or equivalant specification. sqm 32.00 0.00 0.00

TOTAL FOR NON-SCHEDULE ITEMS: CIVIL 0.00 0.00

B NON-SCHEDULE ITEMS:ELECTRICAL

NS_1 7W to 9W LED above Mirror light 18% Supplying and erecting LED mirror light with integrated driver including 7W to 9W lamp with polycarbonate housing and opal diffuser to be fixed above mirror or as required on clamps complete .( Similar to Murphy 6W 3-IN-1 Rose Gold Finish Mirror Light or equivalent specification) Each 46.00 0.00 0.00

NS_2 5W LED Decorative wall mount light 18% Supplying and erecting decorative indoor Wall Mount 5W LED luminaire Fitting ( Similar to Murphy MLDL-COB-CURVED-2WAY-WW-01 or equivalent specification) Each 29.00 0.00 0.00

NS_3 15W LED Down Light 18% Supply, installation, connection, testing and commissioning of LED square / circular 15W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. ( Similar to Murphy MLDL-CBLS-15CW-1 or equivalent specification) Each 18.00 0.00 0.00

NS_4 BLDC Ceiling Fan 18% Supply, installation, connection, testing and commissioning of five star rated energy saving FAB BLDC Ceiling Fan with 100% pure copper motor (4'/1200 mm dia), 30 watt, 225 cmm airflow, 350 RPM speed,BLDC inverter technology with RF pebble remote control along with necessary hardware & accessories, etc with two years warranty. ( Similar to Havells FAB BLDC fans or equivalent specification) Each 61.00 0.00 0.00

NS_5 LED Strip Light 5W/m 18% Supply, installation, connection, testing and commissioning of LED strip light 5W/m for surface type or flush type. ( Similar to Murphy LED ROPE LIGHT 120 LED Warm White or equivalent specification) metre 110.00 0.00 0.00

NS_6 60W LED Outdoor light 18% Supply, installation, connection, testing and commissioning of 60W LED Outdoor Compound Wall Light.Outdoor Compound ( Similar to Inventaa Bloom LED Gate Light Warm White or equivalent specification) Each 16.00 0.00 0.00

NS_7 45W LED outdoor Light 18% Supplying and erecting LED street light 250v, 45w with innovative, aesthetic and robust design with pressure die cast aluminium housing with UV stabilized PC IP diffuser for better light distribution (Similar to Panasonic product code PSTM23457 or equivalent specification) Each 12.00 0.00 0.00

NS_8 Exaust Fan Light duty 250V new 18% Supply, installation, connection, testing and commissioning of Exhaust fan of light duty250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wiremesh, duly erected in an approved manner and marking .( Similar to Havells Ventil Air DX 250mm or equivalent specification) Each 22.00 0.00 0.00

NS_9 Exaust Fan Heavy duty 250V new 18% Supply, installation, connection, testing and commissioning of Exhaust fan of heavy duty 250 V A.C. 50 cycles 600mm. 900 RPM rust proof body & blades, wiremesh, duly erected in an approved manner and marking. ( Similar to Crompton 600mm or equivalent specification) Each 3.00 0.00 0.00

NS_10 Call bell 18% Supply, installation, connection, testing and commissioning of Ding Dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size. ( Similar to Panasonic Penta Ding Dong Door Bell or equivalent specification) Each 19.00 0.00 0.00

NS_11 Telephone cable 0.9/0.6 Sq.mm 18% Supplying & erecting 10 pairs x 0.5 mm dia PVC insulated armoured telephone cable 0.9/0.6 sq.mm PVC Sheathed solid tinned copper conductor cable laid in provided trench/ cable tray . Metre 125.00 0.00 0.00

NS_12 20Pair Telephone Box 18% Supply, installation, testing and commissioning of indoor type 20 Pair telephone distribution box with suitable S.S. frame for mounting tag module, Krone module and incorporated in 16 SWG MS box with proper lockable cover. The box should be fixed on wall with suitable fasteners including painting & earthing. This also includes fixing the cable, distribution chart sufficient space for the cables, wires etc. . Each 3.00 0.00 0.00

NS_13 32 Extensions 18% Supplying and installing, testing & commissioning of 32 extensions complete.( Similar to EPABX CCL 232 Epabx or equivalent specification) Each 1.00 0.00 0.00

NS_14 Push button telephone with caller ID 18% Supplying, installing, testing & commissioning approved type Push button telephone instrument desk top/wall mount with caller ID unit of approved make . ( Similar to Beetel M59 or equivalent specification) Each 1.00 0.00 0.00

NS_15 Push button telephone 18% Supplying, installing, testing & commissioning approved type Push button telephone instrument desk top/wall mount unit of approved make .( Similar to Beetel B17 or equivalent specification) Each 27.00 0.00 0.00

NS_16 12U wall mounted network rack 18% Supply & installation of 12U wall mounted network rack alongwith all necessary hardware & accessories, etc.complete as required . Each 1.00 0.00 0.00

NS_17 24 port Gigabit L2 switch 18% Supplying and fixing 24-port Pure-Gigabit L2 Managed Switch, 12 Gigabit SFP slots, 4 Combo Gigabit LAN ports in provided U Rack complete. ( Similar to TP-LINK TL-SG5412F or equivalent specification) Each 1.00 0.00 0.00

NS_18 TV cable RG-11 18% Supplying and drawing co-axial TV cable RG-11 grade, solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit . metre 27.00 0.00 0.00

NS_19 4-way Splitter box for TV 18% Supply & installation of 4-way Splitter box for TV cable termination including all necessary hardware, accessories, etc. . Each 4.00 0.00 0.00

NS_20 T8 LED 20W 4 feet tube ligh 18% Supply, installation, connection, testing and commissioning of T8 LED 20W 4 feet tube light fitting with aluminium housing, heat sink, integrated HF electronic driver complete (THD<15%)( including lamp). ( Similar to Philips Slimline Super Bright LED Tube Light 919415920162 or equivalent specification) Each 58.00 0.00 0.00

NS_21 LA Spike 18% Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner,and accessories required to complete . Each 1.00 0.00 0.00

NS_22 EARTH PIT 18% Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free GI Earth Pit With 76 mm pipe in pipe technology 3 mtr long + BFC 25KG fill up the excavated earth with required quantity having 300X300mm brick masonary chamber with MS coverplate for inspection. (Civil Work paid seperately or equivalent specification) Each 4.00 0.00 0.00

NS_23 25 x 6 mm GI strip earth 18% Supply, Installation, Testing and commissioning of 25 x 6 mm GI strip earth strip on wall, underground with nut, bolt, clamp etc with neccessory fixing arrangement . metre 315.00 0.00 0.00

NS_24 32x 6 mm GI strips earth 18% Supply, Installation, Testing and commissioning of 32x 6 mm GI strips earth strip on wall, underground with nut, bolt, clamp etc with neccessory fixing arrangement . metre 106.00 0.00 0.00

NS_25 AC 2TR 18% Supplying, installing, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2 TR capacity having ISEER minimum 4.50 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R410 A /R32 and copper condenser at position.(Diakin/bluestar/LG or equivalent specification) Set 10.00 0.00 0.00

NS_26 AC 1.5TR 18% Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR capacity having ISEER minimum 4.50 suitable to operate on250V, 50 cycles, A.C. supply having 1 no of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condensor at position. (Diakin/bluestar/LG or equivalent specification) Set 18.00 0.00 0.00

NS_27 6W LED Study Table Lamp 18% Supply, installation, connection, testing and commissioning of 6W LED Study Table Lamp suitable for Table standing. ( Similar to Philips Orbit Desk Light 919215850922 or equivalent specification) each 18.00 0.00 0.00

NS_28 60W LED Post top lamp 18% Supply and erection of aesthetically designed IP65 LED post top light luminaire comprises of spun aluminim top cover, die cast aluminiumheat sink, opal pmma acryli8c diffuser and die cast mounting base arm (Similar to Panasonic produc code PPTM02604 or equivalent specification). including all fittings and bulb. each 15.00 0.00 0.00

NS_29 10W Land scaping lights 18% supply and erection of aesthetically designed IP65 LED bollard luminaire comprises of galvanized extruded mold steel pipe housing with opal polycarbonate diffuser and aluminium mounting base (Similar to Panasonic product code PBDM03108 or equivalent specification). including all fittings and bulb. each 15.00 0.00 0.00

NS_30 Distribution board 18% Supply, installation and commissioning pre-wired, factory fabricated, distribution board of steel sheet (thickness not less than 1.6mm) for 415V AC system IP-52 protected duly powder coated paint, with bus bars of suitable size, suitable for Wall Mounting,. incoming, out going and internal cable/wires termination including Glanding, Energy meters, connecting with earth pit with 2 runs of copper wire/strip (excluding supply copper wire/Strip)and supply, installation and termination of MCCB, MCBs of Type-C, 10kA Short circuit rating) , in complete shape along with any other required accessories, with following configuration: i. 250A FPMCCB - 1No ii. Bus bars for 3-Phases, Neutral and Earthing iii. 100A, FP MCCBs -8 No. iv. Direct Connected (with out CT) 3-Phase, 4-Wire -6 No. Static Energy meters (LCD display) of class 1.0 or better accuracy, with kWh, kVAh,kVARh, MD with Min current rating starting from 0A and Max. current rating should not be less than 60A- To be connected at the outgoing 63A Feeder v. Red, Yellow, Blue LED indicating lamps for each phase of incomer vi)Mounting Arrangement: Suitable stand shall be provided for Wall mounting with stang extended upto ground level. Gland Plate: Removable Type gland Plate for Incomer / out going cables. The terminals must be suitably designed for incomer cable of 3.5*70 Sq.mm power cables and outgoing 25 Sq.mm FRLS Multi Strand copper wire. Set 1.00 0.00 0.00

NS_31 2C x 6SQMM power cable 18% Supply, laying and termination of 2C x 6SQMM power cable for extending power supply for outdoor post top lamps metre 250.00 0.00 0.00

NS_32 submain wiring 18% Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 25 sq. mm + 1 X 25 sq. mm earth wire metre 100.00 0.00 0.00

NS_33 Gyser 10L capacity 18% Supply, installation, connection, testing and commissioning of Storage Water Heater 10L - Free Standard Installation & Pipes, 5 Star Rated, ABS Body Vertical Geyser ( Similar toRacold BUONO PRO 10L) EA 18.00 0.00 0.00

NS_34 CAT6 cable for lan 18% Supply, installation, connection, testing and commissioning of CAT6 ( unshielded twisted pair HDPE PVC ) ethernet cable, 10 metre high speed 550 MHZ/10 gigabite speed UTP LAN Cable, network cable internet RJ45 cable lan wire, 24AWG 0.51 mm CCA consutor (copperclad aluminum). (similar to Fedus CAT6) Metre 280.00 0.00 0.00

NS_35 12U wall mounted network rack 18% Supply & installation of 12U wall mounted network rack alongwith all necessary hardware & accessories, etc.complete as required . EA 1.00 0.00 0.00

NS_36 24 port Gigabit L2 switch 18% Supplying and fixing 24-port Pure-Gigabit L2 Managed Switch, 12 Gigabit SFP slots, 4 Combo Gigabit LAN ports in provided U Rack complete. ( Similar to TP-LINK TL-SG5412F) EA 1.00 0.00 0.00

NS_37 wall mounted fan 18% Supply, installation, connection, testing and commissioning of five star rated energy saving 400mm wall mounted high speed fan with smooth oscillation, 100% copper motor, 3speed control, 1350 RPM speed, 72cmm air delivery along with necessary hardware & accessories, etc with two years warranty. ( Similar to Havells FAB BLDC fans or equivalent specification) EA 6.00 0.00 0.00

TOTAL FOR NON-SCHEDULE ITEMS: (Electrical) 0.00 0.00

C NON-SCHEDULE ITEMS: Kitchen chimney and fresh air system.

Part A- Chimney System

NS-1 18% Supply, fabrication and installation of G.I sheet ducting made with minimum 22 guage/0.8 mm thickness GI sheet of make TATA/ UTTAM/ JSW with supporting materials like rods (8 mm dia, etc.), anchor fasteners, nut bolts, rubber gasket, etc., and MS support angle 35x35x4 mm with 2 coats black paint with primer as per instruction of Engineer-Incharge. (Measurement shall be box peripheral dimesion multiply by length). Sqft 500.00 0.00 0.00

NS-2 18% Supply, fabrication and installation of Stainless Steel Kitchen Hood with made of SS sheet of 304 grade & minimum 22 guage/0.8mm thikness of make Jindal/SAIL with oil filters and light provison as per instruction of Engineer in charge. The minimum widht of Hood shall be 3 feet. RFT 18.00 0.00 0.00

NS-3 18% Supply and installation of 3 phase, 7.5 HP exhaust blower 1440 RPM, 50 mm static pressure, direct drive of Crompton/ BAJAJ/ Havells make motor connection with cable size 6 Sqmm, 4 core (of make finolex/havells/polycab or equivalent) with starter and single phase preventer as per instruction of Engineer-In-Charge. Set 1.00 0.00 0.00

NS-4 18% Charges for civil base work for blower fixing and wall opening for ductings shaft scaffolding work etc., as per site reuirement to complete the entire scope of work and as per instruction of Engineer-In-Charge. Lot 1.00 0.00 0.00

NS-5 18% Supply, Installation and fixing of G.I. Volume Control Damper (VCD) Damper in Duct near Hood as per instruction of Engineer-In-Charge. Nos 7.00 0.00 0.00

Part B- Fresh Air Cooler System

NS-6 18% Supply and installation of Ecoair Evoporative Air cooler 30000 CMH EAC 30 model 3 phase, single speed top discharge with 4" thick honey comb pad 4 sides with noise limit of 70 DB. Nos 1.00 0.00 0.00

NS-7 18% Supply, fabrication and installation of G.I sheet ducting made with minimum 22 guage/0.8 mm thickness GI sheet of make TATA/ UTTAM/ JSW with supporting materials like rods (8 mm dia, etc.), anchor fasteners, nut bolts, rubber gasket, etc., and MS support angle 35x35x4 mm with 2 coats black paint with primer as per instruction of Engineer-Incharge. (Measurement shall be box peripheral dimesion multiply by length). SFT 500.00 0.00 0.00

NS-8 18% Supply and installation of 12"X12" size Double Deflection Alumunium grill with powder coating as per instruction of Engineer-In-Charge. Nos 10.00 0.00 0.00

NS-9 18% Charges for civil miscellaneous work for air cooler system, supply and installation of cutting welding MS stand for air cooler with 50X50X5 mm MS angle with primer and two coat paint, supply, installation and fixing cable of size 4 sqmm & 3 core wire (of make Finolex/ Havels/Polycab or equivalent ) from air cooler to starter and wall opening as per site requirement to complete the entire scope of work and as per instruction of Engineer-In-Charge. Set 1.00 0.00 0.00

TOTAL FOR NON-SCHEDULE ITEMS: (Kitchen chimney and fresh air system.) 0.00 0.00

D NON-SCHEDULE ITEMS: Supply of Furnishing Items for EDC Hostel

I 16 + 2 GUEST ROOMS

1 18% Godrej UNO Study Table Nos 32.00 0.00 0.00

2 18% Godrej KD Slimline With Locker Nos 32.00 0.00 0.00

3 18% Godrej Adriana Bed Side Table Nos 32.00 0.00 0.00

4 18% Godrej Wonder Pillow Nos 32.00 0.00 0.00

5 18% Godrej Bed sheet Protector 78*8*6 Nos 32.00 0.00 0.00

6 18% Godrej Shine Chair SS Nos 32.00 0.00 0.00

7 18% Godrej Single Protector Nos 32.00 0.00 0.00

8 18% Godrej Double Protector Nos 2.00 0.00 0.00

9 18% Bombay Dyeing Cotton Pillow Cover Nos 64.00 0.00 0.00

10 18% Bombay Dyeing Cotton Single Bed Sheet Nos 64.00 0.00 0.00

11 18% Bombay Dyeing Cotton Double Bed Sheet Nos 4.00 0.00 0.00

12 18% Branded Blanket Nos 36.00 0.00 0.00

13 18% Branded Big Towel Nos 72.00 0.00 0.00

14 18% Anti Sqid Bathroom Door Mat Nos 16.00 0.00 0.00

15 18% Large Door Mat Nos 16.00 0.00 0.00

16 18% Silent Tracks + Curtains Material + Lining Semi Satin Black out + Stitching + Fixing Nos 23.00 0.00 0.00

17 18% Bathroom Mirror with Back Storage Nos 16.00 0.00 0.00

18 18% Premium Cloth Hanger Nos 360.00 0.00 0.00

19 18% Ventilator Plain Etching sticker Nos 16.00 0.00 0.00

1 18% Godrej Unwind Chair Nos 36.00 0.00 0.00

2 18% Godrej 6 Seater Timeout Table Nos 2.00 0.00 0.00

3 18% Godrej 4 Seater Timeout Table Nos 4.00 0.00 0.00

4 18% Godrej Café POD Nos 3.00 0.00 0.00

5 18% 5Nos. Roller Blinds Black Out material Nos 1.00 0.00 0.00

1 18% Godrej Glass Door VSDU - 8 Nos 3.00 0.00 0.00

2 18% Godrej Relish Table Nos 1.00 0.00 0.00

3 18% Godrej Slotted Angel Racks 6Ft Nos 2.00 0.00 0.00

4 18% Godrej Side By Side Refrigerator 600Ltrs Nos 1.00 0.00 0.00

5 18% Godrej Deep Freezer 500 Ltrs Nos 1.00 0.00 0.00

6 18% Godrej M2 Storwel Nos 1.00 0.00 0.00

7 18% Godrej Micro Wave Nos 1.00 0.00 0.00

8 18% Bosh Dish Washer Nos 1.00 0.00 0.00

9 18% Prestige Gas Stove 2 Burners Nos 2.00 0.00 0.00

IV RECEPTION AREA

1 18% Godrej Reflection Reception Table Nos 1.00 0.00 0.00

2 18% Godrej Greta 2.0 Chair with Headrest Nos 1.00 0.00 0.00

1 18% Godrej KD Periodical Display Rack Nos 1.00 0.00 0.00

2 18% Godrej Caterair Coffee Table Black Nos 1.00 0.00 0.00

3 18% Godrej Bay flow Sofa Set (3+1+1Str) Nos 2.00 0.00 0.00

4 18% Titan Wall Clock basic model Nos 20.00 0.00 0.00

5 18% Project execution cost including Transport, Delivery, Installation and Shifting. Nos 1.00 0.00 0.00

6 28% LG 55 Inches SMART LED TV Nos 1.00 0.00 0.00

TOTAL FOR NON-SCHEDULE ITEMS: (Furnishing Items.) 0.00 0.00

Total of Non-Schedule Items (Schedule - II) 0.00 0.00 Sheet OK

As all the line items are Left Blank the bid is considered as Non-responsive

Renovation of EDC Hostel Building at Hyderabad SS

(GRAND SUMMARY)

Bidder’s Name and Address (Sole Bidder) : To:

Name : 0 Contract Services

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

0 Kavadiguda Main Raod,

Secunderabad - 500080

Sl. No. Description Total Price (INR)

1.1 TOTAL SCHEDULE NO. I

Supply & Installation Charges- Schedule Civil & Electrical Items for Renovation of EDC Hostel Building at Hyderabad SS NOT QUOTED

1.2 TOTAL SCHEDULE NO. II

Supply & Installation Charges- Non-Schedule Civil & Electrical Items for Renovation of EDC Hostel Building at Hyderabad SS NOT QUOTED

I Total of Service/Installation Charge (ITEMS TAB: Item 01 INSTALLATION FOR DCB (INR) : SRM ATB for BID PRICE SUMMARY Statement ) Non-responsive Bid

GST on Schedule-I NOT QUOTED

GST on Schedule-II NOT QUOTED

Total GST for BID PRICE SUMMARY Statement ) Non-responsive Bid

III GRAND TOTAL Non-responsive Bid

Date : 0 Printed Name : 0.00

Place : 0 Designation : 0.00

Specification No: Ref: SR-I/C&M/WC-4460/2025 Rfx no.: 5002004923 Bid Form 2nd Envelope

BID FORM (Second Envelope)

Bid Proposal Ref. No.

Contract Services

Power Grid Corporation of India Ltd.,

Southern Region Transmission System-I

Name of Contract : Renovation of EDC Hostel Building at Hyderabad SS

Dear Ladies and/or Gentlemen,

1.0 In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to undertake the above-named package in full conformity with the said Bidding Documents for the sum of Rs. Non-responsive Bid /- only or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to undertake the above-named package in full conformity with the said Bidding Documents for the sum of Rs. /- only or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. Non-responsive Bid

Sch-1 Schedules Items as per DSR 2021 excluding GST

Sch-2 Non-Scheduled Items

Sch-3 Grand Summary

2.3 We declare that as specified in Clause 4.6, ITB, Vol.-IA of the Bidding Documents, the prices of all the Services to be supplied under this contract shall be FIRM and doesnot subject to any price adjustment as per relevant clauses in bidding document.

3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

3.1 100% of applicable Taxes and Duties i.e GST , which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

3.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions.

5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.