Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹24.0 L+₹3.0 L (14.3%)Rejected-Finance | L2 | Rejected-Finance Quoted other than lowest rate. | |
| 3 | L3₹24.0 L+₹3.0 L (14.5%)Rejected-Finance | L3 | Rejected-Finance Quoted other than lowest rate. | |
| 4 | L4₹26.7 L+₹5.8 L (27.4%)Rejected-Finance 220 GANPATI ENCLAVE DABWALI ROAD BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L4 | Rejected-Finance Quoted other than lowest rate. | |
| 5 | L5₹27.9 L+₹6.9 L (32.8%)Rejected-Finance 1227 MODEL TOWN MODEL TOWN BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L5 | Rejected-Finance Quoted other than lowest rate. |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
30 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SH ASHOK KUMAR, EE, IDSE
GE NORTH BATHINDA Pin-151004
PERIODICAL SERVICES TO CERTAIN BLDGS OF HQ 10 CORPS COMPLEX AND REPAIR/CLEANING OF SEWAGE SYSTEM IN OTM ACCN AREA SOUTH SIDE OF VIKRAM BATRA MARG UNDER AGE BR III OF GE (N) BATHINDA AT BATHINDA MIL STN
2023_MES_604342_3
8938/NIT-17/23-24
Open Tender
Civil Works
Item Rate
330 days
BATHINDA
Class D category a(i) (ii)
8 documents required · 8 mandatory
₹500
GE NORTH BATHINDA
₹60,000
Yes
20 Oct 2023
15 Sept 2023
3 Oct 2023
15 Sept 2023
30 Sept 2023
23 Sept 2023
15 Sept 2023 - 20 Sept 2023
Amount
Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth upto entire satisfaction of Engineer-in-charge and after preparing the surface smooth applying one coat of lime white wash with using paint brush complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth upto entire satisfaction of Engineer-in-charge and after preparing the surface smooth applying one coat of lime white wash with paint brush complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of oil bound distemper (washable) by using electric paint roller or roller brush, as per existing or as approved tint/colour complete all as specified and as directed by Engineer-in-Charge.
Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down and preparing the surfaces smooth and preparatory to distempering and after prepare the surface smooth applying two coats of oil bound distemper (washable) as per approved tint/colour by using paint brush or roller brush complete all as specified and as directed by Engineer-in-Charge. NOTE : - Each stage i.e after complete removal and before applying OBD as specified above, the surface shall be passed in writing by the Enigineer-in-charge.
Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, washing down with water and to make surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of cement base paint with paint brush or roller brush, as per existing or as approved tint/colour complete all as specified and as directed by Engineer-in-Charge.
Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls / pillars / cornices by scraping down with using steel patti wire/ brush / sand papering or by any other mean, remove / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc brooming all dust and washing down with water and after preparing the surface smooth applying two coats of cement base paint as per approved tint/colour with using paint brush/roller brush, complete all as specified and as directed by Engineer-in-Charge. NOTE : - Complete removal /scraping to old existing treatment as directed by Engineer-in-charge, each stage i.e after complete removal and before applying CBP as specified above, the surface shall be passed in writing by the Enigineer-in-charge in site order book.
Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth and after that applying one coats of weather proof exterior emulsion paint (wheather coat Apex, 100% exterier grade) by using paint roller brush or electric paint spray machine, as per existing or as approved tint/colour complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth and after that applying two coats of weather proof exterior emulsion paint (wheather coat Apex, 100% exterier grade) by using paint roller brush or electric paint spray machine, as per existing or as approved tint/colour complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using sanded paper, clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old painted surfaces (plastered/unplastered/concrete) of any description over 10cm girth or width, not otherwise described of of walls/pillars /cornices by brooming down or steel patti as required etc., and after preparing the surface applying two coats of plastic emulsion paint (finishing smooth and glossy upto entire satisfaction of Engineer-in-Charge) with using paint brush/roller brush, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old polished wooden surfaces of any description not otherwise described over 10cm width or girth & applying two coats of french polishing to achieve glossing finish upto entire satisfaction, including a coat of wood filler complete as specified and as directed as per existing or as approved tint/colour complete as specified and as directed by Engineer-in-Charge.
Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for rendering/plastering appx 15mm thick (matching with existing plaster thickness) in cement mortar (1:6) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other means, and preparing the surfaces smooth by applying two coats of oil emulsion distemper (washable), as approved tint/colour by using paint roller brush complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering/plastering appx 15mm thick (matching with existing plaster thickness) in cement mortar (1:4) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying two coats of cement base paint as per approved tint/colour by using paint brush complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering/plastering appx 10mm thick (matching with existing plaster thickness) in cement mortar (1:3) on any face of ceiling in patches matching with existing, finished fair and even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparing newly plastered or concrete surface of ceiling by sand papering or by any other mean and after preparing the surfaces applying two coats of white wash complete all as specified & directed by Engineer-in- charge
Material and labour for preparing the plastered surfaces smooth and to make good depression by applying average 3mm thick layer (1.5mm thick in each in two layer application) of white cement based putty (wall care putty make birla JK or equivalent as approved by Enginner-in-Charge) and sanding the surface by using mechanical sander machine (including provn of dust sucking ) to make the surface even and smooth upto entire satisfaction of Enginner-in-Charge to receive surface finish of any type of treatment complete all as specified & directed by Engineer-in- charge
Material and labour for preparation of old concrete painted concrete surfaces, road side kerb stone of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using clean cloths and dry paint brush & applying one coats of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed by Engineer-in-Charge.
Supply and fixing 3 mm thick sheet glass ordinary quality & glazing with oil putty in square/rectangle shape fixed in window not exceeding 0.5sqm in each pane complete all as specified & directed by Engineer-in- charge.
Supply and fixing 4.8 mm thick sheet glass ordinary quality & glazing with oil putty in square/rectangle shape fixed in window not exceeding 0.5sqm in each pane complete all as specified & directed by Engineer-in- charge.
M&L for painting lines, dashes, arrows, letters, marking etc of 3.0 mm thick film on new surfaces or previously treated road surfaces with hot applied retro reflective thermoplastic road marking paint (white/Golden yellow) conforming to MORT&H (clause 803.14) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160 degree C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified & directed by Engineer-in- charge.
Material and labour for Cleaning/removal of blockage from bathroom, kitchen, WHB and urinals including connected Nahani traps / gully traps/floor traps, grating of trap, waste pipes, pipe in any length upto Ist manhole etc., choked with mud / other accumulated sludge and getting out, washing thoroughly at any location, at any floor by rodding/choke remover/Pressure technique/manually or otherwise to clear blockage upto entire satisfaction of users, including refixing of oval assess door covers with new nuts & washers and refixing manhole covers, including removing of all wastes, solid or liquid sludge and depositing the sludge in a pit (at empty/open area) of suitable size at a distance exceeding 50 metres from the building where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Cleaning/removal of blockage from EWC/IWC (any type) including connected traps (any type), pipe in any length upto Ist manhole etc., choked with mud / other accumulated sludge and getting out, washing thoroughly at any location, at any floor by rodding/choke remover/Pressure technique/manually or otherwise to clear blockage upto entire satisfaction of users, including refixing of oval assess door covers with new nuts & washers and refixing manhole covers, including removing of all wastes, solid or liquid sludge and depositing the sludge in a pit (at empty/open area) of suitable size at a distance exceeding 50 metres from the building where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Cleaning of existing sewage system/pipe line 100/150/200mm dia (length of pipe line manhole to manhole not exceeding 15mtr) including cleaning of manholes (any type rectangular / square / circular) located in different situations/sites, taking off the manhole cover (CI or RCC) and placing in the same original position after getting out liquid/sludge/solid contents from the manholes/sewage line and complete perfect function/running/flowing condition without any obstruction by removing all blockage in system with manual labour (rodding manually) or by mechanically sewage suction pump (at contractor;s discretion as required at site) making it fully functional to the entire satisfaction of Engineer-in-charge including removing of all wastes, solid or liquid sludge through closed container and depositing the sludge in a pit (at empty/open area) of suitable size at any distance upto 200 metres from the line/colony area where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Cleaning of existing sewage system/pipe line 100/150/200mm dia (length of pipe line manhole to manhole exceeding 15 mtr but not exceeding 30 mtr) including cleaning of manholes (any type rectangular/square/circular) located in different situations/sites, taking off the manhole cover (CI or RCC) and placing in the same original position after getting out liquid/sludge/solid contents from the manholes/sewage line and complete perfect function/running/flowing condition without any obstruction by removing all blockage in system with manual labour (rodding manually) or by mechanically sewage suction pump (at contractor;s discretion as required at site) making it fully functional to the entire satisfaction of Engineer-in-charge including removing of all wastes, solid or liquid sludge through closed container and depositing the sludge in a pit (at empty/open area) of suitable size at any distance upto 200 metres from the line/colony area where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified and as directed by Engineer-in-Charge.
Note for item No 25 to 28 (i) Contractor must employ Minimum Four nos (04 Nos) labourer's daily. (ii) Contractor or his representative shall report daily at 09.00 AM except on Sunday/ National holidays in the office of Engineer-in-Charge/ Complaint cell to receive complaint slip and necessary directions. Complaints received through telephonic message from JE/ Engineer-in-Charge shall also be attended on the same day and the completion of work shall be reported by 05.00 PM of every working day to JE/ Engineer-in-Charge. (iii) In case of non attaedence of complaints against BOQ item 25 and 26 above by the contractor on the same day, a penalty of Rs 200/- per complaint per day and for complaints against BOQ item 27 to 28 above, a penalty of Rs 100/- per complaint per day will be recovered from the contractor due. (iv) The cost for all necessary T&P such as green female bamboo strips, iron rods, sewage rodding machine, buckets, rope, ladder, safety mask, bleaching powder etc. and all other other materials for execution of the work shall be included in the unit rate. (v) A complaint register shall be maintained by JE and proper record of complaints received and attended with date and time shall be recorded and shall be signed daily by both the parties. (vi) Complaint register shall be kept on record of Engineer-in-Charge after completion of work.
Excavation in trenches in soft / loose soil not exceeding 1.5 metre wide & not exceeding 1.5 metre in depth for foundations of manholes, sewerage pipe lines etc including getting out complete all as specified and as directed by Engineer-in-Charge .
Demolition and breaking up drain pipes SGSW, AC or reinforced concrete pipe upto and including 150 mm bore pipes, complete all as specified and directed by Engineer-in-Charge.
Material & labour for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate to drain pipe including packing under & hunching against the sides of pipe 150 mm dia ( internal) after they are laid and tested in trenches, complete all as specified and directed by Engineer-in-Charge.
Material & labour for 150 mm dia ( internal) SGSW pipes grade ‘A’ laid in trenches & jointed, complete all as specified and as directed by Engineer-in-Charge .
Material and labour cutting into existing manholes for connecting new drain 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round to 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required, complete all as specified & directed by Engineer-in-charge.
Demolition of brick work built in cement mortar including all quoins, pillars etc., but excluding pre-cast cement concrete articles complete all as specified and as directed by Engineer-in-Charge .
Material and labour Brick work with sub class ‘B’ bricks old size straight or curved on plan exceeding 6 metre mean radius built in Cement Mortar 1:4, complete all as specified and as directed by Engineer-in-Charge .
Demolition of cement concrete of any description in ground floor or in any position not exceeding 15 cm thickness, complete all as specified and as directed by Engineer-in-Charge .
Material & labour for cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate for foundations, fillings & mass concrete, sub base, plinth protection, complete all as specified and as directed by Engineer-in-charge.
Material & labour for cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate for manhole benching, flooring and coping, complete all as specified and as directed by Engineer-in-charge.
Material & labour for 15 mm thick cement plaster in CM 1: 4 on fair / unfair faces of brick work or concrete surfaces finished even & smooth without using extra cement, including mixing of WPC in mortar @ 3% of cement content,complete all as specified and as directed by the Engineer-in-Charge. (Note :- Water proofing compound shall be measured & paid separately as Supply only)
Material & labour pre-cast RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in pre-cast manhole cover slabs of any thickness, size or shape including all necessary form work, finishing concrete surface fair & even and set in CM 1:4, including demolition of old cover, complete all as specified and directed by Engineer-in-Charge.
Material and labour for mild steel TMT bars 8 mm to 10 mm dia cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
Returning/filling in including spreading, leveling, watering & well ramming in layers not exceeding 25 cm thick each, complete all as specified and as directed by Engineer-in-Charge.
Removal of excavated material to distance not exceeding 1.5 metre above the starting point, complete all as specified and as directed by Engineer-in-Charge .
Supply only integral water proofing powder ISI make complete all as specified and directed by Engineer-in Charge.
Dismantling and disconecting of existing cast iron soil vent pipe fixed to wall laid in trenches including all fitting & accessories, complete all as specified and directed by Engineer-in Charge.
Supply and fixed 100 mm dia cast iron soil waste and vent pipes (sand cast) in any length laid in trenches or fixed to wall with cement joints including supply & fixing Stack clamps of 50mm x 5mm flat iron & 16mm dia round iron stays, including nuts & bolts & securing ends of stays to wall & roof, complete all as specified and directed by Engineer-in Charge.
Supply and fixed 75 mm dia cast iron soil waste and vent pipes (sand cast) in any length laid in trenches or fixed to wall with cement joints including supply & fixing Stack clamps of 50mm x 5mm flat iron & 16mm dia round iron stays, including nuts & bolts & securing ends of stays to wall & roof, complete all as specified and directed by Engineer-in Charge.
Supply and fixed in repair 100 mm bore cast iron bends/Tees of any radius diminshing pieces or tappers (larger bore measured), complete all as specified and directed by Engineer-in Charge.
Supply and fixed in repair 75 mm bore cast iron bends/Tees of any radius diminshing pieces or tappers (larger bore measured), complete all as specified and directed by Engineer-in Charge.
Dismantling and disconecting of existing PVC (SWR) pipes fixed to wall laid in trenches including all fitting & accessories, complete all as specified and directed by Engineer-in Charge.
Supply and fixed 110 mm dia PVC (SWR) pipes in any length laid in trenches or fixed to wall with rubber ring joints including supply & fixing Stack clamps of 50mm x 5mm flat iron & 16mm dia round iron stays, including nuts & bolts & securing ends of stays to wall & roof, complete all as specified and directed by Engineer-in Charge.
Supply & Fixed in repair 110mm dia, PVC(SWR) bends/Tee of any radius diminishing pieces or tappers (larger bore measured), complete all as specified and directed by Engineer-inCharge.
Supply & Fixed in repair SFRC (Steel fibre reinforced concrete) cover and frame (heavy duty HD-20 grade designation) size of cover 0.70 x 0.70 conferming to IS 12592, fixed in cement cocrete 1:2:4, complete all as specified and directed by Engineer-inCharge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.
Material & Labour for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceed 0.11 sqm in floors etc.set jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed built in CM 1:6, complete all as specified and directed by Engineer-inCharge.
Material & Labour for non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in floors ,area of each tile exceed 0.11 sqm but not exceed 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 15 mm thick screed plaster in CM 1:6, complete all as specified and directed by Engineer-inCharge.
Material & Labour for glazed ceramic coloured tiles of size(200x300) x7/8 or (300x450)x7/8 mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plater in cement mortar 1:4, pointed with white/ coloured cement to match, complete all as specified and directed by Engineer-inCharge.
Supply & fixing in repair vitreous China squatting pan 'Orissa' pattern white of size 580mmx440mm white with integral foot rests and CI 'P' or 'S' trap (excluding flushing cistern, flush pipe above floor), including demolation of tile, PCC, taking out mass concrete filling and re filling PCC (1:7:12) type F2 after fixing of WC and trap with proper joints leakproof including PVC flush pipe upto finished floor level, and making good with 30mm thick cement concrete (1:2:4) type B0 finished rough as a sub base to recieved tile work and including all other connected work as required upto entire satisfaction of Engineer-in-charge, complete all as specified and as directed by Engineer-in- charge. (NOTE : Tile work with screed shall be measured and paid separately under appropriate item of this schedule.)
Supply & fixing in repair vitreous China pedestal pattern white, (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair PVC low level cistern 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pvc pipe of low or high density or PVC 32 mm dia for low level cistern and PVC connections, complete all as specified and as directed by Engineer-in- charge.
Cleaning & De-sludging by removing semi solid sludge from the septic tank of any capacity at any depth manually or mechanically in foul condition including all necessary tools and plants required for removal of sludge and solid contents from the site, complete all as specified and as directed by Engineer-in- charge. Note:- The sludge obtained after de-sludging is contractor should remove the sludge out side defence land immediately without any extra cost from the MoD land.
Dewatering the existing soakage well/septic tank by bailing out /pumping out or by any other means and depositing the same off into existing open drain /surrounding low lying area nearby, complete all as specified and as directed by Engineer-in- charge.
M/s NIRMAN BUILDERS
BALAJI CONSTRUCTIONS
M/S SAI BUILDERS
M/s VISHAL ELECTRIC STORE
G N CONSTRUCTIONS
RAKESH KUMAR GARG & CO.
M/s MITTAL CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .