Erection of LT line for providing power supply to CCTV Camera along with illumination of the 04 kms Coal corridor road from DLB Railway siding no-02 to NH Gate entry point at Lingaraj OCP, Lingaraj Area

Supply of 10 Mtrs swaged tubular street light pole as per IS:2713/80 part-2 latest (410 SP-42)

Erection of Metallic pole of following length in cement concrete 1:3:6( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc as required. Above 8.0 mtrs. And upto 10.0 mtrs.

Supplying of channel iron 75mm x 40mm x 6mm cross arm for 4 wire OH line complete with clamps,bols, nuts & washer etc. including drilling of holes for insulaor pin sets and painting with primer & finish paint etc as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required.

Erection of angle iron / channel iron cross arm on wood/ RCC /PCC / Steel tubular / Rail pole etc. as reqd.

Supplying and erection of 100 mm X 65 mm pin insulator complete with G. I. Spindle and nuts etc. as required .

Supply & Erection of 75mm x 90mm shackle Insulator with GI Bolts, Nuts and straps etc as reqd .

Supplying & erection of stay set complete(galvanized) with 19/20 mm diaX 1.8 mtrs long stay rod ,anchor plate of size 45cmx45cmx7.5mm thimble, stay clamps, bow tightener, 7/3.15 mm dia GI stay wire and strain insulator etc. in cement concrete 1:3:6 (1 cement:3 coarse sand :6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required.

Supply of 3 x 25 sqmm. + 1 x 25 sqmm. AB cable (4 core) as per TPS attached.

Supplying and fixing of 32 mm dia X 2.00 metres long GI. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as reuired.

Erection of AB cable of 25sq mm diameter including binding etc as reqd.

Erection of Light fittings as required.

Providing & fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 100 Amp ICTP

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.(63 AMP)

Supplying and fixing of astronomical timer panel for street light control of rating 3Ph, 440V, 110A with timer switch, accessories like ELR, CBCT, 3pole power contactor (similar to ML-06 Contactor, operating coil Voltage- 230V,02NO+02NC Auxuliary Contact), Voltmeter with VSS, Indication lamp(GREEN+RED 02 NOS.),03nos control fuse(06amp) with incomer 125amp 04pole mccb(35KA) with Double door water proof Enclousure dimension (650mmX500mmX300mm) with stand etc as required and mentioned in TPS.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supply of 6 SWG G.I wire.

Erection of G.I wire 8/6 SWG including binding etc as required.

Supply of 200 Watt LED Street light as per TPS attached

Supply & Fabrication of 1.5MtrX 1.5Mtr X0.8Mtr Stand of M.S. channel/angle.plate with painting for installation of transformer as per analysis

Supply of 4core PVC insulated power cable of 1.1KV grade 35sq mm Aluminium armoured cable as per TPS Attached

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size on wall surface as required.Upto 35 sq. mm (Clamped with 1mm thick saddle)

Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supply of 63 mm dia HDPE pipe PE-80, PN-8 etc as required.

Supply & fixing of Anti Climb spikes for LT poles made with 2mtr MS Angle (35X35X5), 5Mtr G.I. barbed wire etc as per instruction.

G.I Barbed wire Fencing 1.2 metre high Providing and fixing 1.2 metres high GI barbed wire (weighing 9.38 kg per 100 mts.) fencing with 1.8 m angle iron posts 40 mm x 40 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808 (16mtr X 4 Nos= 64 Mtr)

Supply of 1.1KV grade, XLPE isnualted, single armoured, 2 core, 2.5sqmm Aluminum cable as per IS:7098

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work (1mtr length i.e., 0.61sq.M per pole x110 poles)

Lettering with black Japan paint of approved brand and manufacture as per instruction (For pole & feeder numbering i.e, For 110poles= 1331 letters & 5.5cm per letter= 1331X5.5=7320.5)

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC