Karnataka

Active

Works

Buildings

Construction of Shettru Sidaappa Govt PU collage at Ajjampura Chikkamagaluru District

Public Works Department

PWD Division Office Chikkamagaluru | Chikkamagaluru, Karnataka

Amount: ₹50.0 LCloses: 28 Sept 2026Due tomorrow

Timeline

Published11 Sept 2026
Closes28 Sept 2026

Tender Value

₹50.0 L

EMD Value

₹99,981

Closing Date

28 Sept 2026, 4:30 pmDue tomorrow

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

DIVAKAR C M

Office Number

Work Description

Construction of Shettru Sidaappa Govt PU collage at Ajjampura Chikkamagaluru District

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT35883

Reference Number

PWD/2026-27/BD/WORK_INDENT35883

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

PWD Division Office Chikkamagaluru

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredKPWD Class III and above Registration

RequiredMandating Satisfactory completion as a prime contractor, for at least one Similar nature of work to on Extent Of 50 percentage of the cost of the work for all works costing up to and Rs.100 Lakhs i.e. Rs. 25.00 Lakhs. similar nature of work ie BUILDING WORK, 2021-22 to 2025-2026

RequiredAchieved in at least TWO financial year a Average financial contract turnover 2021-22 to 2025-26 in all classes of civil engineering construction works only. Of Rs.49.99 lakhs, contract receipts certified by the chartered accountant. Submit the balance sheet indicating the contract receipts certified by the chartered accountant with UDIN No.

Requiredexisting commitments and on-going works to be completed during the next NINE months in the prescribed format from the Competent Authority not below the rank of Executive Engineer District Level Officer

RequiredName, address, and telephone, telex, and fax numbers of the Tenderers may provide references if contacted by the Employer

RequiredTenderers , will only be qualified, if their available tender capacity is more than the total tender value. i.e. AXNX2.5 - B as per KW 2 Document for computing the value of A and B for the last five years i.e. 2021-22 to 2025-26

RequiredContractors has to upload the EPF Registration with PAID RECIEPT OF AUGUST 2026

RequiredContractor has to upload GST Declaration Certificate in the prescribed format.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP-Portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund and Contractors should Follow strictly prevailing rules of labour act.

The tenderer should be a PWD registered Contractor - Class-3 and above also Contractors should have Registration of GST, Employers Provident Fund and tenderer should submit Registration Certificate along with technical bid.

Conditional tenders will not be accepted.

The Tenderer should submit the scanned copy of the last 5 years balance sheet indicating the civil work contract receipts certified by the chartered accountant. Submit the balance sheet indicating the contract receipts certified by the chartered accountant with UDIN No/Auditor & Tax consultant with their registration no, who ever is applicable.

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders. The item rates quoted shall include cost of royalty charges on construction materials & other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts labor, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work

To qualify for award of this contract, each tenderer should furnish qualification information as per section 3 of Standard Tender Document attached to this tender.

The bidder shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for those costs. The tender fee is non-refundable and The employer is not responsible for any delay in accessing KPPP portal.

Only Original documents to be scanned and uploaded, Executive Engineer reserves the right verify the Original Documents before approval, original documents/Certificate for qualification shall be produced when called for during evaluation of tender.

All the Formats prescribed in the bid Documents shall be filled in Complete manner.

As per Government order FD 447 EXP-12 2022 dated 30/07/2022, 18% GST will be added to the Contract amount seperately. And Increase in GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time.

Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18% of Amount Put to Tender) amount is kept in form of Lump sum in sanctioned estimate accroding to guidelines in Common SR (GO:PWD 51 RDF 2019 Bangaluru Dt:18.03.2022). Therefore amount put to Tender and ECV amount are excluding GST. KPPP-PORTAL format has No Options to add GST Seperately at stage of Draft Tender Schedule Process for Over ALL amount put to tender, tender has been inviting through an Option with INCLUSIVE. but the item wise rates do not include GST. Hence, GST will be paid seperately for the quoted amount accrodingly. Declaration Certificate must be attached mandatorily.

The Employer reserves the rights to accept any Tender and to reject any or all Tenders as per Standard Tender Document Clause 22.

The Tenderer should maintain the road during defective liability period of upto one year.

Tender shall obtain the work done Certificate in the prescribed format from the Competent Authority no below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Tender. The Original Certificate shall be produced at the time of Opening of Technical Bids for Physical Verification, If sought.

Bidder should upload the bid capacity calculated as per ,KW-2 tender condition, The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. False representations in the statements leads to disqualification of the tender as per clause 3.1

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

The Successful bidder has to follow the prevailing Government orders regarding Royalty charges. The Contractor has to submit an MDP Certificate along with the running contractor bills. Otherwise the Department will take necessary action as per the government Orders/Circulars.

Any deviation/error/mistakes found in units of items, they should be read as unified SR 2023-24 and the rates shall be quoted accordingly

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

The contractor should be responsible for all deduction of the labours wages as per the Labour Act.The Public Works Department will not be held responsible for the same.

Contractors has to upload the EPF Registration with AUGUST -2026 paid receipt. Contractors has to submit their labour EPF details with every Running Bill

Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

Name, address, and telephone, telex, Email-id and fax numbers of the Tenderers may provide references if contacted by the Employer

The contractor has to quote the same Rate to the same items of work to be executed at the same floor level. If in case, contractor quotes different rates for the same item appearing at different places of BOQ then, the lowest quoted rate for the same items will be considered for that particular item for evaluation and payment.

The HOA is 8443-00-117-0-16-542 Deposit contribution

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,250

EMD Fee Amount

₹99,981

Important Dates

Last Activity

11 Sept 2026

Published

11 Sept 2026

Download Ends

23 Sept 2026

BOQ Preview

•

Construction of Shettru Sidaappa Govt PU collage at Ajjampura Chikkamagaluru District

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

•

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick ma- sonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type

•

Fastener with t...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

•

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior pai...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, ...

•

Providing electrification and electrical fixtuers to Shettrusiddappa Govt PU collage at Ajjampura Chikkamagaluru District

•

Concealed Conduit System

•

Supplying heavygaugePVCconduitpipe.mmdia.mmthick

•

confirming toIS2509withsuitablesizebends,metal/PVCJunction

•

boxes,adhesivepasteetc.,andrunningbeforeconcretingtheslab. The

•

Concealed Conduit System

•

Supplying heavygaugePVCconduitpipe.mmdia.mmthick

•

confirming toIS2509withsuitablesizebends,metal/PVCJunction

•

boxes,adhesivepasteetc.,andrunningbeforeconcretingtheslab. The

•

SupplyingandfixingofPVCcasingandcappingonthewallorceiling

•

usingnecessarymaterials likebends, junctionbox, elbows, screwsat

•

an interval of 300 mm as required 20 mm Vol-6 I.N 1.8.1 P.N PWD Ele SR 2-23-2...

•

SupplyingandfixingofPVCcasingandcappingonthewallorceiling

•

usingnecessarymaterials likebends, junctionbox, elbows, screwsat

•

an interval of 300 mm as required.25 mm Vol-6 I.N 1.8.2 P.N PWD Ele SR 2-23-2...

•

Point wiring using Copper wire with switch.

•

Supplying and wiring adopting loop system in existing PVC

•

Conduit /casingcapping using2x1.5Sqmm(Phase&Neutral) &

•

1x1.0 sqmm(Earthwire) FRLSmultistrand PVC i...

•

Point wiring using Copper wire with switch.

•

2.1 Supplying and wiring adopting loop system in existing PVC

•

Conduit /casingcapping using2x1.5Sqmm(Phase&Neutral) &

•

1x1.0 sqmm(Earthwire) FRLSmultistrand P...

•

Point wiring using Copper wire with switch.

•

2.1 Supplying and wiring adopting loop system in existing PVC

•

Conduit /casingcapping using2x1.5Sqmm Phase&Neutral &

•

1x1.0 sqmm(Earthwire) FRLSmultistrand PV...

•

Wiringfor lighting/powercircuitusingoneof FRLSPVCinsulated

•

1100Vgrade,multistrandcopperwirewithlowconductor resistance

•

singlecore inopenorconcealedsystemofwiringwithspecifiedIS

•

Wiringfor lighting/powercircuitusingoneof FRLSPVCinsulated

•

1100Vgrade,multistrandcopperwirewithlowconductor resistance

•

singlecore inopenorconcealedsystemofwiringwithspecifiedIS

•

Wiringfor lighting/powercircuitusingoneof FRLSPVCinsulated

•

1100Vgrade,multistrandcopperwirewithlowconductor resistance

•

singlecore inopenorconcealedsystemofwiringwithspecifiedIS

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch vol-6 I.N 3.6.1

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch vol-6 I.N 3.6.2

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket vol-6 I.N 3.6.3

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module Vol-6 I.N 3.6.4

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch vol-6 I.N 3.6.9

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket vol-6 I.N 3.6.10

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.RJ45/I.O Outlet Cat-6 vol-6 I.N 3.6.12

•

Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws.60 mm vol-6 I.N 3.10.1

•

Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws.80/90 mm vol-6 I.N 3.10.2

•

Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws.110 mm vol-6 I.N 3.10.3

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying and drawing UTP-CAT 6E LAN cable. vol-6 I.N 8.1

•

Supplying & fixing of I/O socket with back box Single I/O vol-6 I.N 8.10.1

•

Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power factor 0....

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Supplying and Fixing.mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street lig...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32 A Vol-6 I.N 5.7.2

•

Supply and Installation /Fixing /Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water pr...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Notification 22.pdf

Others - TENDER NOTIFICATION • 0.48 MB

KW2 -35883.doc

Tender Document • 2.82 MB

required docs only upload in eproc.pdf

Instructions to Tenderers • 0.84 MB

GSTDECLARATION CERTIFICATE.docx

Others - GST DECLARATION CERTIFICATE • 0.01 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Buildings

Construction of Shettru Sidaappa Govt PU collage at Ajjampura Chikkamagaluru District

Public Works Department

PWD Division Office Chikkamagaluru | Chikkamagaluru, Karnataka

Amount: ₹50.0 LCloses: 28 Sept 2026Due tomorrow

Timeline

Published11 Sept 2026
Closes28 Sept 2026