Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.3 CrAccepted-AOC | ₹18.3 Cr Quoted ₹18.4 Cr | L1 | Accepted-AOC Being Lowest Bidder |
| 2 | L2₹20.2 CrRejected-Finance STREET NO 11 SECTOR NO 04 TILAK NAGAR SAGAR ROAD BIKANER RAJASTHAN 334001 | BIKANER | RAJASTHAN | 334001 | ₹20.2 Cr | L2 | Rejected-Finance Other than Lowest Bidder |
Tender Value
₹15.1 Cr
EMD Value
₹10.8 L
Closing Date
23 Aug 2023, 6:00 pmClosed
Chief Engineer , Bhopal Zone Bhopal
HQ , Chief Engineer , Bhopal Zone, Military Engineer Services ,Bhopal
PROVN OF OTM ACCN FOR JOB NO S / 2979 (PHASE ONE OF TWO PHASES) AT JHANSI UNDER GE JHANSI
2023_MES_584886_2
CA NO. CEBZ / JHA / TOKEN / 26 OF 2022-23
Open Tender
Civil Works
730 days
Jhansi
Please refer Tender documents.
4 documents required · 4 mandatory
₹3,000
GARRISON ENGINEER JHANSI
₹10.8 L
Bhopal
12 Sept 2024
20 Jul 2023
26 Aug 2023
20 Jul 2023
23 Aug 2023
4 Aug 2023
28 Jul 2023
Amount
Note:-Please refer schedule 'A' notes before quoting the tender.
GENERAL SUMMARY
Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule ‘A’ Part- I (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- II (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’ Part- III (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- IV (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for EXTERNAL ELETRIC SUPPLY WORKS as listed in Schedule ‘A’ Part- V (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for ROAD PATH & CULVERT WORKS as listed in Schedule ‘A’ Part- VI (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for COMPOUND WALL FENCING & GATE WORKS as listed in Schedule ‘A’ Part- VII (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule ‘A’ Part- VIII (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule ‘A’ Part-IX (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for LIGHTNING PROTECTION TO OHT WORKS as listed in Schedule ‘A’ Part-X (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for HOT WATER SUPPLY WORKS as listed in Schedule ‘A’ Part-XI (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for REFRIGERATION & AC WORKS as listed in Schedule ‘A’ Part-XII (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for DG SET WORKS as listed in Schedule ‘A’ Part-XIII (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for EXCAVATION, EARTH WORK AND SITE DEVELOPMENT WORKS as listed in Schedule ‘A’ Part-XIV (Ref prepriced schedule attached seperately)
SCH 'A' Pt - XV (MISCELLANEOUS ITEMS)
INTERNAL ELETRIFICATION WORKS NOTE:- For items of internal Electrifications notes given at the beginning of Sch ‘A’ Part-III (internal Electrification) shall also be applicable.
M&L point wiring for light point wiring complete with 1.5 Sq.mmm PVC insulation unsheathed muilt-starnded FRLSH copper conductor 1100 Volts grade draw through in and including 20 mm dia PVC conduit and conduit accessories, concealed in walls and terminatedto and including provision of modular metal flush boxes (metal switch board of any type and size) with modular metal frame plate and white cover for housing switch, sockets, regulators etc, including 1.5 sqmm PVC insulated unsheathed multi-stranded FRLSH copper conducotor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed for the following points . NOTE:- The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates, etc.
One light point controlled by one way 6A modular switch.
One fan point controlled by one way 6A modular switch.
One Exhaust fan point controlled by one 6 Amps one-way modular switch
One bell point controlled by one modular 6A bell push
One light point controlled by 6A, 2-way modular switches
One socket outlet controlled by 6A modular switch on independent board
One socket outlet controlled by 6A modular switch on same board
Description all as per Sl item No. 4.01 above, but with cable 2.5 sqmm for phase and neutral & 2.5 sqmm for earth continuity complete for 6 / 16 Amps socket point.
S&F Surface mounting 40 W, LED batten, 240V, PF > 0.95, THD < 10%, colour temprature 6500K, CRI > 80, system lumen not less then 4600lm, housing provided for efficient heat dissipation with polycarbonate diffuser and build in electronic divice with lumEn efficacy not less than 125 lm/W, dura batten type complete with all accessaries internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size from ceiling rose all as specified and as directed.
S&F LED batten, 1x 9/10W, 240V, PF > 0.90, THD < 20, colour temprature 6500K, CRI > 80, system lumen 950 lm, 2 feet length complete with suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm three core from ceiling rose complete all as specified & directed.
Supply & fix flame proof exhaust fan CMRI approved of size 305 mm sweep,motor 0.25 HP,1440 RPM, AC single phase 230V with blades , frame and louver, complete all as specified and directed.
M&L for flame proof metalic hose conduit, M20/3/4" conduit MxM/FxF 300mm, complete all as specified and as directed.
M & L for flame proof 4 way lighting junction box in cast aluminium alloy LM-6 material size 3/4 “ ET 125 mm x 75 mm dia, with 6 Nosterminals/connectors 4 sq terminals with flanged cover earthing external 2 Nos, and internal 1Nos2 Nos3/4” ET entry, hardware in stainless steel with anti corrosive epoxy powder coated with protection IP-65 equipment standard as per IS-2148/81, alongwith along with cable glands double compression flame proof heavy duty suitable for gas group I/IIA/IIB/IIC approved by CCE and certified by CMRI complete all as specified and directed.
M & L for flame proof 3 way lighting junctionbox in cast aluminium alloy LM-6 material size 3/4 “ ET 125 mm x75 mm dia, with terminals/connectors 6 Nos, 4 sq terminals with flanged cover earthlings external2 Nos, and internal-2 Nos 3/4” ET entry, hardware in stainless steel with anti corrosive epoxy powder coated with protection IP-65 equipment standard as per IS-2148/81, alongwith along with cable glands double compression flame proof heavy duty suitable for gas group I/IIA/IIB/IIC approved by CCE and certified by CMRI complete all as specified and directed.
S&F Single pole and neutral sheet metal enclosure 6 way double door for MCB’s, Phosphatised Powder Painted with Bus Bar 200 amp rated, 240 volt AC complete concealed in wall all as specified and directed.
S&F Sheet metal enclosure for pre wired distribution board double door, vertical type powder coated triple pole & Neutral (VTPN) 8 way with out MCCB, three phase 415 volt with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete concealed in wall all as specified and directed.
S&F Timelite DB including 32 Amps 3 pole MCB, ML2 power contactor and programable digital time switch suitable for street light control including all internal control wiring all as speciefied and directed.
S & F LED Security light fitting 25 Watt, luman efficacy of LED 140 lm/W, PF> 0.95, THD < 10%, colour temprature 6500K, CRI > 70, system lumen not less then 2600 Lm, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with toughed glass having bottom separate driver compartment with IP 66 Protection inbuilt potted electronic LED driver with APFC (SMPS board constant current supply) lower THD open circuit protection, over voltage protection, surge voltage protection up to 10 KV & other safety as per IS 15885 Part 2 ISW13 & BIS complying and Impact resistant of IK 07 etc and all accessories previewed complete including mounting bracket of 40 mm inner dia light grade of required length and shape incl bending, forging or welding etc and suitable bolts and nuts with washers, including connecting with PVC insulated multi stranded copper flexible cable of size 0.5 sq m three core from ceiling rose to fitting complete all as specified an directed.
S&F RJ 11 telephone socket with shutter, 1 module including modular cover plate, metal flush box (16 Gauge) concealed in wall / roof complete all as specified and as directed.
S&F RJ 45 computer jack with Cat no-6 socket, 1 Module, including modular cover plate, metal flush box (16 gauge) concealed in wall/roof all as specified and as directed.
M & L for Point wiring using approved colour coding as per IS ( Red, Black and Green for single phase circuits) with multi-stranded copper conductor 1.5 Sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, in stove enamelled steel conduit conduit and conduit accessories concealed in wall/roof/floor etc. ISI marked , including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly One light point/Fan point controlled by one 16 amps one way flame proof switch, complete all as specified and directed.
Description all as per Ser item No. 4.22 above, but with cable 2.5 sqmm for phase and neutral & 2.5 sqmm for earth continuity complete for 16 Amps flame proof socket point complete all as specified and directed.
S&F modular MCB protected plug & socket board in sheet enclosure. 25Amp rated mini MCB & 25 Amp rated 3 pin plug, 210V, 50 Hz complete including cutting and wall for flush mounting of shut board.
S&F set of 02 x LED lamp 1w, pin type, 230V AC, 50 Hz single phase in different colour (01 x Green colour & 01 x red colour) including Bakelite button holder with all fitting accessories complete all as specified and directed. Note : 1. Warranty for replacement of each LED shall not be less than 05 years from the date of purchase. 2. Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefit.
EXTERNAL WATER SUPPLY WORKS NOTE:- For items of EXTERNAL WATER SUPPLY WORKS notes given at the beginning of Sch ‘A’ Part-IV (EXTERNAL WATER SUPPLY WORKS) shall also be applicable.
Supply, installation, testing and commissioning of Monobloc pump set consist of gland packing with cast iron impeller, C-40 Shaft, TEFC motor, IP-44 , F-class insulation with minimum discharge 500 LPM at 30 mtr head , 3 phase AC, 415 volts, 50 Hz, 1500 RPM, suction/ delivery of size 100mm/100mm of capacity 10 HP including required PCC foundation work as per manufacturer recommendation complete all as specified and directed.
Supply and fix Cast Iron foot valve flanged end / screwed end ball type/ swing type ISI marked including necessary packing material, bolts, nuts and washers of size 100mm dia complete all as specified and directed .
Supply, installation, testing & commissioning of heavy duty chemical dosing system suitable to inject solution upto 25 LPH comprising of dosing pump, Granular chlorination (Calcium hypochlorite) dosing pump, high pressure, single head, gear motored adjustable dosing pump having output of 2 U.S. GPD to 40 U.S. GPD and adjustable high pressure of up to 100 PSI(7KG/CM)2 with accessories including lead , tubing, connecting nuts , ferrules, injection check valve etc. incl Dosing system 100 Ltr. FRP tank with lid & level gauge along with agitator and shaft & blade in plastic mounted on tank.Agitator motor with specification-voltage input-230V,Single phase,50Hz,900 RPM, complete all as specified & directed.
Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 2.5 sq mm, 3 core, 1100 Volts grade complete all as specified and directed.
Description all as per Item No. 5.06 here-in-before but of size 150mm bore.
Description all as per Item No. 5.06 here-in-before but of size 100mm bore.
M&L for DI fittings (other than mentioned here-in-above), flanged type / spigot & socket end type, ISI marked up to size 250 mm dia such as bends of any radius and angle, sockets, tapers any type (straight, bend, increasing or decreasing etc), Tee pieces (single branch), 'Y' junction, double branch, connecting pieces bell mouth pieces, cross collars, caps and plug set etc with and incl all jointing materials i.e. MS nut, bolts, washer, rubber gaskets etc, complete as specified and directed.
Supply, fix, connect and testing sluice valves of bore size 200mm dia and class 1.0 PN, cast iron body with stainless steel spindle, non-rising type, and cast iron wheel head, both ends flanged, IS-14846 marked, complete with neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc , complete all as specified and directed.
Description all as per Ser item No 5.10 above but 150mm bore.
Description all as per Ser item No 5.10 above but 100mm bore.
Description all as per Ser item No 5.10 above but 80mm bore.
EXTERNAL ELETRIC SUPPLY WORKS NOTE:- For items of EXTERNAL ELECTRIC SUPPLY notes given at the beginning of Sch ‘A’ Part-V (EXTERNAL ELETRIC SUPPLY) shall also be applicable.
M&L for cutting of existing road / hard standing up to 15 cm depth for laying of pipe lines and making good the disturbed surfaces by providing PCC 1:2:4 type B-1 (using 20mm graded aggregate) after laying of pipes lines / cables and returning filling of soil, complete all as specified and directed. Note:- Excavation and earth work below road / hard standing will be measured and paid under relevant Schedule.
Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches / floors / duct or fixed on walls / pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.
ROAD PATH & CULVERT WORKS NOTE:- For items of ROAD PATH & CULVERT WORKS notes given at the beginning of Sch ‘A’ Part-VI (ROAD PATH & CULVERT WORKS) shall also be applicable.
S&F solar cat eyes / road stud having die cast aluminium body with reflection strip, fully water proof and weather proof coating, visible distance upto 500 mtrs having compact, highly efficient battery with backup upto 4 days. 6 Nos LED (3 Nos each), automatic dusk to dawn operation including solar 3.5V/110MA & battery one PC sub 'C' type Ni Cd rechargeable battery 1.2V, 2.5VAH, temperature range 20 degree centigrade to 70 degree centigrade, capable of withstanding temperature between minus 20 degree centigrade to plus 55 degree centigrade and flash rate of 50-65 times per minute, having anti twist and anti theft ribs, fixed on road for roadway sign complete all as per manufacturers instruction, complete all as specified and directed.
S&F Birla 3M CAT EYE (Road stud) or equivalent as approved by GE , of size 100mm x 100mm x 20mm , made of poly-carbonate moulded body with electronically welded prismatic retrorange on both sides for maximum retro reflection in wet and dry condition to be fixed with 3M bituminous adhesive BT-69 , complete all as specified and directed.
COMPOUND WALL , FENCING AND GATE WORKS NOTE:- For items of COMPOUND WALL , FENCING AND GATE WORKS notes given at the beginning of SCHEDULE 'A' PART - VII (COMPOUND WALL , FENCING AND GATE WORKS) shall also be applicable.
S & F for concertina coil 600 mm dia of each coil and 10 Nos coil / round for 1 RM fixed with top of angle iron Y Section of boundary wall complete all as specified & directed.
M&L Provision of Steel gate 8.00 m wide in double leaf, and RCC pillars of excavation and earth work in any type of soil, formwork, RCC(M-25) for pillar , reinforcement bars, painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer, two coats of cement base paint over 5mm thick CM (1:4) plaster over pillars as per TD drawing CEBZ /TD /43/2022 , complete all as specified & directed.
M&L Provision of Steel gate 5.50 m wide in double leaf, alongwith of wicket gate of 0.9 m width , including RCC (M-25) pillars, excavation and earth work in hard/dense soil, formwork, RCC (M-25 Design mix) for pillar, reinforcement bars, painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer, two coats of cement base paint over 5mm thick CM (1:4) plaster over pillars complete as per TD drawing CEBZ /TD /44/2022 complete all as specified & directed.
SEWAGE DISPOSAL WORKS NOTE:- For items of SEWAGE DISPOSAL WORKS notes given at the beginning of SCHEDULE 'A' PART -IX (SEWAGE DISPOSAL WORKS) shall also be applicable.
Construction of Septic Tank of 50 Users with provn of excavation, in any type of soil, foundation in PCC 1:4:8, walls of fly ash brick masonry with top cover of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCI, complete all as specified & as per TD drawings attached.
Construction of Septic Tank of 150 Users with provn of excavation, in any type of soil, foundation in PCC 1:4:8, walls of fly ash brick masonry with top cover of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCI complete complete all as specified & as per TD drawings attached.
Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of 50 Users (1.2m dia X 3.0m effective depth) complete all as specified & as per TD drawings attached.
Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of 150 Users (1.2m dia X 4.5m effective depth) complete all as specified & as per TD drawings attached.
LIGHTNING PROTECTION TO OHT WORKS NOTE:- For items of LIGHTNING PROTECTION TO OHT WORKS notes given at the beginning of SCHEDULE 'A' PART -X (LIGHTNING PROTECTION TO OHT WORKS) shall also be applicable.
S&F integral LED aviation light fitting comprising of aluminium housing with polycarbonate enclosure, IP65, Operating Input Voltage Range 100-270 V, AC,10 System wattage(W) 240 V complete all as specified and directed.
S&F Analog time switch with inbuilt battery backup, 3 module size, 24 hours program, programmable every 15 minutes, backup of 100 hours, current capacity 16A with polycarbonate enclosure for wall mounting complete all as specified and directed.
REFRIGERATION & AC WORKS NOTE:- For items of REFRIGERATION & AC WORKS notes given at the beginning of SCHEDULE 'A' PART -XII (REFRIGERATION & AC WORKS) shall also be applicable.
Supply & install wall mounted voltage stabiliser, copper wound type for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of + or - 2.5% of capacity 4 KVA complete all as specified and directed.
Supply & install wall mounted voltage stabiliser, copper wound type for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of + or - 2.5% of capacity 5 KVA complete all as specified and directed.
Supply & installation of refrigerator, single door, elcectric driven (single phase), 230 Volt 50 HZ, BEE certified minium 5 star ratingcapacity of 200 Ltrs frost free complete all as specified and as directed.
Supply & installation wall mounted voltage stabiliser, copper wound type for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of + or - 2.5% of capacity 1 KVA complete all as specified and directed.
Supply, installation and testing of commercial evaporative type Air cooler (Desert Cooler) Steel body, 230 Volts, single phase, having capacity of 4000 cum/hr (450 mm Sweep) Water storage capacity not less than 40 Ltrs, 15 mm dia floot valve and suitable PVC connectors, moquito proofing net for all sides providing with fixing arrangements with suitable size of MS angle iron stand with wheel arrangments complete all as specified and directed.
Supply, installation and testing of commercial evaporative type Air cooler (Desert Cooler) Steel body, 230 Volts, single phase, having capacity of 5000 cum/hr (450 mm Sweep) Water storage capacity not less than 50 Ltrs, 15 mm dia floot valve and suitable PVC connectors, moquito proofing net for all sides providing with fixing arrangements with suitable size of MS angle iron stand with wheel arrangments complete all as specified and directed.
DG SET WORKS NOTE:- For items of DG SET WORKS notes given at the beginning of SCHEDULE 'A' PART -XIII ( DG SET WORKS) shall also be applicable.
Supply, install, testing and commissioning of silent type Diesel engine driven Generating set of capacity 40 KVA/32 KW, 3 phase, 4 wire, 415 Volts, 50 Hz, at 0.8 pf (lag) with Diesel Engine, Alternator and control panel all mounted in acoustic enclosure complete confirming to the detailed specifications as given below & all as confirming to ISO 8528 :-
Diesel Engine : The diesel engine shall be of capacity suitable for alternator of capacity 40 KVA/32 KW developing required power for rated KVA as confirming to BS: 5514, at 1500 RPM, 4 cylinders in-line, 4 stroke, radiator cooled, continuous duty with 10% overload capacity for any one hour in 12 hours of continuous running and consisting of following:- a) Radiator cooled b) Electrical Starter Motor 12V DC. c) 1No X 12 V battery, 90 AH rating with connecting leads and terminals d) Battery Charging Alternator e) Fuel System with electronic governor f) Full flow Spin-on lube oil filter g) Duel fuel filter with water separator h) Residential type silencer j) Dry type air cleaner k) Fly wheel and fly wheel housing l) First fill of lube oil & Coolant.
Alternator : The Alternator shall be of capacity 40 KVA/ 32KW, 415 Volts, at 0.8 pf(lag), 50 Hz, 3 phase, 4 wire system, suitable for operation at 1500 RPM. The Alternator shall be brushless type, screen protected, revolving field, self excited, self regulated through an AVR, copper wound, Class 'H' insulation, having ±1.0% voltage regulation (max) in static conditions and continuous duty operation all as confirming to IS : 4722 , IP-23 protection.
Mounting Arrangement: OEM assembled engine & alternator shall be mounted on a common MS fabricated base frame with Anti Vibration Mounting Pads.
Fuel Tank: Integral fuel tank shall be of capacity not less than 110 Liters and provided with drain plug, air vent, inlet and outlet connection, level indicator and provision for cleaning.
Acoustic Enclosure: The entire generator, prime mover, fuel tank and DG set control panel should be housed in a sound proof acoustic enclosure made of CRCA sheets with UV resistant powder coated and a structural/sheet metal base frame. The walls of the enclosure should be insulated with high quality noise absorbent and fire-retardant grade acoustic insulation material complying to IS 8183 for better sound attenuation so as to comply with the 75 dBA at 1 meter sound levels at 75% load under free field conditions as specified by MOEF/CPCB. The enclosure should be provided with the following:- (i) Suitable doors on all sides to enter in to the container for easy maintenance. All doors shall be provided with locks and handles for opening/ closing of doors. (ii) Suitable internal lighting to carry out easy inspection and maintenance. (iii) Air Inlet louvers designed to operate at rated load. (iv) Fluid drains for lube oil and fuel. (v) Fuel filling point with locking arrangement. (vi) Push button for emergency stop
PROVISIONAL SUM a) This sum shall be expended wholly or in part as directed by the GE and the work shall be carried out to the extent ordered in writing by the GE. The work under provisional lump sum shall be measured and paid for at the applicable (or prorata) rate in MES schedule adjusted by the percentage quoted by the contractor. (Contractor to quote lumpsum amount which will be converted to percentage over /below) (b) Excavation and earth work & site development etc required for scope covered under provisional lump sum shall be measured and paid under relevant items of sch ‘A’ part XIV, i.e. excavation,earth work and site developement. (A) Provide Provisional sum for :- Construction of PCC Hard Standing of 40 Sqm size- 01 No (Note: Contractor to quote lumpsum amount in col 6 which will be converted to percentage over / below under col 5)
Roshan Lal Talwar
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid