2780-BCWTD/Hug

Dressing and chilchalling Road flanks including cutting and filling with carth up to 150 num average thickness finished with outward cross-grade of 1 in 30 .Page 271 item no 10.1 pwd/r

Construction of Sub Base using Local Materials, spreading in uniform layers with Motor grader on prepared surface, including screening the metal as necessary, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, lighting guarding and barricading including cost and carriage of all materials and making necessary earthen bundh of one metre wide on cach side to protect the edges complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). For Construction of Sub Base by compacting 1st class brick aggregates (40 mm down) and sand (in proportion of 60:40) Page no 244 item no 4.09

Providing and laying Design Mix concrete for plain/reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works. M-20 grade- using concrete mixer.Page 333 item no 18.07

Supplying & laying polythene sheet (150 gm/sqm) below. concrete in foundation page no 47 item no 3

Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, cross drain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. Where staging is not required. Page no 332 item no 18.05

RCC Pipe (Ex-outlet) 600 dia NP-3 spigot page 220 item no 18.05

Providing & fixing Concrete Sign Board as per IRC specification of size 900x750x37mm thick made of RCC 1:1.5:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x75 mm mesh) and fixed with necessary nuts & bolts on two RC precast posts 100mm x150mm of height 2.65m of which top 750 mm is of section 100 x 13mm and 190m above GL &0.75 m below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including, painting two coats on both faces lettering sign marks etc. as per direction of the EIC . Page no 270 Item no 8.07.

Adding 18% Total GST

Adding Labour welfare cess @ 1%

Please Enable Macros to View BoQ information