PROVN OF ADDITIONAL STATIC WATER TANK 03 NOS FOR FIRE FIGHTING AT INS SHIVAJI, LONAVLA

Amount

Total amount of Sch 'A' Part-I (BUILDINGS/STRUCTURES)

Total amount of Sch 'A' Part-II (EARTHWORK/ SITE CLEARANCE & DEVELOPMENT)

Total amount of Sch 'A' Part-III (EXTERNAL ELECTRIFICATION)

Total amount of Sch 'A' Part-IV (ROAD/ PATH/ HARD STANDING)

Total amount of Sch 'A' Part-V (FENCING AND GATE/SIGN BOARD/SAFETY WIRE MESH OVER TOP OF WATER TANK)

Sch 'A' Part- VI (MISCELLANEOUS ITEMS) (Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.)

EXTERNAL ELECTRIFICATION:

Supply and errect steel tubular swaged poles 410 SP-22, 8.5 meter long, conforming to IS 2713-1980 and MS tubing as per IS-1161, brought in two pieces welded at site complete with cast iron base plate, finial taper plug, bolts, nuts and screws including two coat of aluminium paint over a coat of primer all as specified and as directed. Note: Earthwork shall be measured and paid seperately

Supply and fixing LED street light fitting including lamp 70 Watt, 230 V, AC, outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, complete with IP 65/66 protection complete. complete all as specified and as directed.

Supply and laying UG cable XLPE insulated, screened, PVC bedded, galvanised steel wire/strip armoured electric power cables, heavy duty LT 1100 Volt grade, with aluminium conductor of size 10 Sqmm 2 core in trenches/fixing on wall/ poles/ passing through pipes complete all as specified and as directed. NOTE: Excavation and earth work shall be measured and paid separately.

Material and labour for street light wiring with three core multistranded copper conductor each core of 1.5 sqmm, PVC insulated and unsheathed drawn through and including suitable size non metallic rigid PVC conduit 20mm dia with all accessories from street light fitting to distributiin board complete all as specified and as directed. Note : One run of 3 core 1.5 Sqmm cable and PVC Conduit shall be measured one unit length.

Supply and fixing weather proof MCB enclosure with IP 55 protection, 4 way street light junction box on street light pole including 01 MCB SP upto 3 Amps 'C' curve to control street light circuit with 2 x MS clamp made out of flat iron of size 25x4mm for fixing the box to pole complete with nut, bolts and washers fixing properly at directed place by using suitable required fixing arrangement complete all as specified and as directed by Engineer-in-charge.

Material and labour for bracket made out of GI tubing 40mm dia light grade 1.5m long including fixing with MS clamp 2 Nos made out of 50mm wide and 5mm thick falt iron with MS nuts, 04 Nos of bolts 75mm long 12mm dia, 02 Nos of 3mm thick flat washer each including painting with aluminium paint over one coat of red oxide primer to the MS clamp & bracket etc complete all as specified and as directed by Engineer-in-charge.

EXTERNAL WATER SUPPLY:

Material and labour for DI pipes 80 mm bore centrifugally cast, internal cement mortar lining, external zinc coating with finishing layer of black bitumen coating, pressure pipe with socket and spigot end, conforming to IS: 8329 - 2000 with ISI marked K-7 in standard length including necessary rubber gasket, tyton joints, jointing materials complete all as specified and as directed.

Supply and fixing galvanised steel water tubing medium grade 80mm bore including all necessary fittings laid in trenches including inter connection between buildings/pumps/pump houses complete all as specified and as directed..

Supply and fixing cast iron sluice valve 80mm dia with flanged ends confirming to IS 14846 type PN 1.6 with stainless steel spindle, hand wheel etc. including all accessories complete all as specified and as directed.

Material and labour for construction of brick masonry valve pit chambers of internal dimension of 900 X 900 X 900 mm suitable for sluice/stop valve up to 200mm size, with PCC (1:4:8) (100mm thick) type D-2 for foundation, brick masonry work built in CM 1:6, plastering 15mm thick in CM 1:4 mixed with water proofing compound, coping in PCC (1:2:4) type B1 including necessary earth work, form work and provision of MS sheet cover using 3.00mm thick on 40 X 40 X 6 mm angle iron frame fixed with flat iron frame with locking arrangement including painting of MS Sheet & angle with two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces complete all as specified and directed by Engineer-in-Charge.

Supply and fixing DI specials such as bends, tees, collors, tail pieces etc, spigot and socket type upto 80 mm bore all as specified and directed.

Cutting the existing 80mm bore CI pipe line and inserting CI Tee of size 80x80x80mm for taking branch conncetion complete including specials and jointing materials complete all as specified and as directed.

Mehta Construction Co.

Electromech Engineers

Manak landmarks