Bifurcation of 11KV Old Bowenpally Feeder

LOADING & UNLOADING11 KV AB Switch Conventional type 200/400 A

UNLOADING of 11 KV AB SWCH Con 200/400 A

ERECTION OF EQUIPMENT Substations Erection of 11 KVAB Switch including alignment and earthing

AB Switch Coil Earthing GI No. 8 Wire

Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)

S-CI Pipe earthing 100mm dia 2.75m long

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

S-Earthing GI flat 25x3 mm incl material

ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he

Load-11/33KV XLPE UG Cable for all sizes

Unload-11/33KV XLPE UG Cable all sizes

ERECTION OF LINES : UG Cables Jointing :Outdoor / Indoor end termination 11 KV XLPE UG Cable 3 x 300 Sqmm

Lay-SR 11KV 3x300sqmm UG Cb CC/BT Compsr

Raise-SR 11KV 3x300sqmm UG Cb on support

Supply of 6" B Class GI Pipe with 5mm thickness and weight 20Kg per meter

Supply of RCC cable Joint markers of size 700 X 240 X 75 mm duly engraving with 5 mm thick letters , CPDCL 33000/11000 Cable/Cable joint fixing the 300mm below ground level and 400mm above ground level confirming to IS 5820 2001

LOADING & UNLOADING R.S. Joists 175 x 85 mm

UNLOADING of R.S. Joists 175 x 85 mm

TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 10 KM and upto 20 KM

Ex of Hard pit w/o blast 0.75X0.9X1.95M

Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of consumable.

Painting of RS Joist, Rail pole including cross arms and clamps with one coat of red oxid and two coats of Al. paint including cost of paint and consumables

Erection of 9/10/11Meter Box pole

ERECTION OF LINES : Erection of pole in position, aligning and setting to work, fixing of cross arms and top clamps, earthing of supports, back filling with earth and stones properly ramming including transport of materials from road side to location ex

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement

Coping & Muffing-Iron Pole

Painting of all suppports to a height of 0.3m coping with bituminous paint (black colour) and painting of coping with two coats of white cement (including cost of paint).

LOADING & UNLOADING M.S.Channels, Angles, Flats & Rods etc.,

UNLOADING of MS Channel,Angles,Flats&Rod

TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 10 KM and upto 20 KM

Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.

FABRICATION Fabrication of materials U Clamp 50x6 mm MS Flat

LOADING & UNLOADING 1 KV VCBs along with Panel boards

UNLOADING of 11 KV VCBs&Panel boards

Transport of Cond Drum,VCBs upto 10Km

Construction of Plinth for mounting 11KV VCB of size 1.8mx1.8mx 0.75m (0.3m above GL <(>&<)> 0.45m below GL) with 1:3:6 CC , 40mm HBG metal including plastering and cost of cement

Laying of UG Cable Erection of VCBs 11 KV

Testing & Commissioning of Equipment

Load-PVC Control Cable 10C

UnLoad-PVC Control Cable 10C

Lay-4C/10C 2.5Sqmm Control Cable

L-Cable Termination to Switchgear

Provide Addl. Feeder on DC Annunciation

Laying of earth mat including excavation of trenches of depth 600mm, welding, connecting to equipment and connecting lightning shield to earth mat and earthing of fence posts, drilling and connecting earth rods including connecting cast iron pipes with the following sizes of MS Flats /GI Flats. including fabrication.75x 8mm MS Flat / GI Flat.

Fabrication and connecting to risers from earth mat to structures, equipment, marshalling boxes, electrical panels, PLCC panels, fencing posts etc.,.M.S./ G.S. Flat 50x6mm / 50 x 8 mm ( Above ground)

Supply <(>&<)> Spreading of 20mm machine crushed metal(HBG) including cost and conveyance of all materials, labour charges etc. complete for finished item of work and as directed by the engineer-in-charge

S-CI Pipe earthing 100mm dia 2.75m long

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

UNLOADING of 11 KV, 10 KA LAs Line type

LOADING & UNLOADING11 KV, 10 KA LAs Line type -for 100Nos

ERECTION OF EQUIPMENT Substations Erection of 11 KV LAS line type including earthing

S-Al Pad Clamp 75x75x15mm 1 Panther 600A

Connection of equipment to bus and or another equipment with single zebra/Panther conductor including measuring, cutting,clamping and hoisting of suspension insulator assembly to support the conductor wherever necessary.

S-MS Bolts & Nuts,Washers etc.,

Labour charges for Fixing of all types of clamps

S&F-33/11KV SS Feeder Indicator Board

FABRICATION Drilling of holes upto 20 mm dia using power drills per Hole MS Channel, Angles and flat

LOADING & UNLOADING11 KV AB Switch Conventional type 200/400 A

UNLOADING of 11 KV AB SWCH Con 200/400 A

ERECTION OF EQUIPMENT Substations Erection of 11 KVAB Switch including alignment and earthing

AB Switch Coil Earthing GI No. 8 Wire

Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)

S-CI Pipe earthing 100mm dia 2.75m long

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

S-Earthing GI flat 25x3 mm incl material

ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he

Previously 28.07.2020 - Excav. of pit in soils except hard rock

Load-11/33KV XLPE UG Cable for all sizes

Unload-11/33KV XLPE UG Cable all sizes

Transport of Cond Drum,VCBs >10 & <20Km

ERECTION OF LINES : UG Cables Jointing :Outdoor / Indoor end termination 11 KV XLPE UG Cable 3 x 300 Sqmm

ERECTION OF LINES : UG Cables Jointing : Straight through joints11 KV XLPE UG Cable 3 x 300 Sqmm

Lay-SR 11KV 3x300sqmm UG Cb CC/BT Compsr

Raise-SR 11KV 3x300sqmm UG Cb on support

Supply of 6" B Class GI Pipe with 5mm thickness and weight 20Kg per meter

Supply of RCC cable Joint markers of size 700 X 240 X 75 mm duly engraving with 5 mm thick letters , CPDCL 33000/11000 Cable/Cable joint fixing the 300mm below ground level and 400mm above ground level confirming to IS 5820 2001

Sub Transportation of 9.1 Mts PSCC Poles to location from road side.

Exca Hard pit w/o blast 0.76X0.76X1.83M

ERECTION OF LINES : Erection of pole in position, aligning and setting to work, fixing of cross arms and top clamps, earthing of supports, back filling with earth and stones properly ramming including transport of materials from road side to location ex

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement

Removing and Making the Jumpers

LOADING & UNLOADING M.S.Channels, Angles, Flats & Rods etc.,

UNLOADING of MS Channel,Angles,Flats&Rod

FABRICATION Fabrication of materials Back clamps with 50 x 6 mm MS Flat

FABRICATION Fabrication of materials 1.07 mt. V Cross arms with 75 x 40 mm MS Channel

Fix-Side/Cross Arm incl strut fr 11KV

Fix of Pin Insulators with pins

Crane Charges over and above first hour

Cut-Tree Branch(LT/11/33)&Trnsprt Debris

S-MS Bolts & Nuts,Washers etc.,

L-Run 11KV Jumpering to AB Switch

LOADING & UNLOADING11 KV AB Switch Conventional type 200/400 A

UNLOADING of 11 KV AB SWCH Con 200/400 A

ERECTION OF EQUIPMENT Substations Erection of 11 KVAB Switch including alignment and earthing

AB Switch Coil Earthing GI No. 8 Wire

Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)

Supply of GI pipe 40 mm dia, 2 mtrs, 3mm thickness with bolts and nuts

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

S-Earthing GI flat 25x3 mm incl material

ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he