PROVISION OF CERTAIN SANCTION AND MINOR WORKS UNDER GE (AF) BAMRAULI

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out all as sfd and directed.

Excavation not exceeding 1.5 m deep and getting out in hard and dense soil as per specifications and drawing all as sfd and directed.

Removing surplus spoil to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as sfd and directed.

M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as sfd and directed.

M&L for Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:4 and including chiken wire mesh, all as specified and directed.

M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) approved shade of colour

M&L for 75mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as plinth protection finish even and smooth without using extra cement concrete layerd in bays as including construction joint at every 2.00 mtr interval and every change of direction complete all as specified and directed. NOTE the joint shall be 10mm wide, 75mm deep duly filled with mixture of bitumen and sand in CM 1:3

Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

M&L for outdoor garden fountain centre portion with brass nozzle complete all as specified and directed.

Excavation not exceeding 1.5 m depth and getting out in loose soft soil etc complet all as per specifications and directed.

M&L for returning filling in including spreading, levelling , watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks with old size brick straight or curved on pan exceeding 6 m mean radius built in CM (1:6) complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using (20 mm graded stone aggregate) as in bed blocks. Copings and like including weathering, slightly rounded or chamfered angles and throating as directed complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar CM 1:4 on brick /concrete surface complete all as specified and directed.

M&L for designer digital tiles exterior grade premium quality of any size and shape fixed on wall and floor and thickness for tiles is not less than 8 mm laid over 15 mm thick rendering of CM 1 : 4 complete all as specified and directed.

M&L for applying one two coats pidifin 2K treatment incl base coat as per manufacturer instruction mixed with cement as in flooring / walls / chajjas in cement in ratio 1 : 1 @ 1 Liter per Sqm with min interval of 4 hours in each coat, including 15 mm thick rendering in CM 1 : 4 complete incl finished even & smooth without using extra cement all as directed . Note : Make of chemical to Dr. Fixit Gaurantee to be required from the Dr . Fixit. All rates including the supply and applying Dr. Fixit chemical and work to be excuted with authorised technician of Dr Fixit.

Supply of marble stone pebbles of size not exceeding 100 mm in any direction fully polished stone.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Glazed ceramic digital coloured first class tiles (Premium quality) in vertical surface 300x600x7 to 10mm / 300x450x 7 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for Non Skid ceramic coloured first class tiles tiles 7 to 8 mm thick square / rectangular ) area of each tiles not exceeding 0.11 Sqm as in floors laid over and including 15 mm thick screed bed in CM(1:6)and pointed in white or coloured cement to match the shade tile complete all as specified and directed.

M&L for 18- 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, around door frame and like, jointed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F in repair PVC cabinet box and shutter made out of 18 mm thick one side PVC prelaminated wood grain board and shutter will be fixed on the PVC frame including fixing with auto hinges and steel screw including fancy type stainless steel handles complete all as specified and directed. Size of cabinet not more than 90 cm wide.

S&F in repair PVC cabinet frame of size 18mm x75mm made out of 18mm thick PVC board wood grain colour and frame shall be fixed with 50mm long steel screw inside using drilling machine and plastic fasteners Make : Rajshree or equivalent complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern )P or S type including PVC sheet cover & flushing cistern, flushing pipe), including making good the floor with adjacent floor finishing and making connection to flush pipe etc complete including making functional and removal rubbish/waste materials to a distance n. exc 50m, complete all as specified and directed. Make of WC

S&F in repair Vitrious china china wash basin white , flat back size 580x450 complete all as specified and directed.

S&F in repair Urinal flat back size 465x355x265mm wite with grating and union ofr discharge pipe including waste pipe, CP waste coupling and CP brass urinal spreader complete all as specified and directed.

Supply only Brass CP Basin Mixer screwed for iron pipe etc complete all as specified and directed.

S&F in repair 15 mm bore Stop cock fancy type CP cast copper alloy of , screwed down, high pressure both ends for iron pipe or for unions and fixed complete all as specified and directed. (Make Hindware/Jaquar).

S& F sinks with drain board made of stainless steel 1 mm thick kitchen or laboratory with plugs or washers and wastes including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting unions to pipe overall size 915x460mm bowl size 410x 330 mmx 160 mm including all neceeary fittings ie waste coupling and waste pipe all as specified and directed

S&F in repair CP 15 mm dia bib tap cast copper alloy with fancy screwed for iron pipe complete all as specified and directed.

S&F in repair CP push button taps for urinal 15 mm dia cast copper alloy with fancy screwed for iron pipe complete all as specified and directed.

S&F in repair towel rail 600mm long PTMT fixed with an d including chromium plated brass screws and wooden / plastic plugs min weight 190 Gms holder twin type

S&F in repair rational moulded poly urathene water storage tank of capacity 1000 Ltrs hoisted and fixed in position all as specified and as directed

S&F in repair toilet paper holder with stainless steel flap all as specified and directed.

S&F in repair Health faucet ABS SS Braided Hose 1 m with CP hook etc complete all as specified.

S&F in repair CP connection 600 mm long braded hose with MIOXI nipple, 15 mm nut , O ring and rubber washer for 15 mm bore of pipe all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connections and all as specified.

Taking up or down 20 mm bore steel water tubing and connections and all as specified.

S&F 15mm bore galvanised steel water tubing medium grade, with all fitting fixed to walls, laid in floors/ceiling including concealed etc all as specified and directed.

S&F 20mm bore galvanised steel water tubing medium grade, with all fitting fixed to walls, laid in floors/ceiling including concealed etc all as specified and directed.

S&F in repair CI floor trap 75 mm dia of outlet with stainless steel grating including jointing to waste pipe in run led joint complete all as specified and directed.

S&F in repair 100 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)

M&L for Providing and fixing false ceiling of 16 mm thick fine fissurred RH-99 prime Make-Armstrong Tegular and accoustic purpose of size 600x600x16mm thick fixed in GI grid powder coated snap grid ceilling of l section 25 mm x25mmx1.5mm thick and Tsection 25mm x25mm x1.mm with suspender of 10 gauge GI wire of required length, fixed with dash through fastener bolt of approved quality 04 Nos for per sqm including necessary cuting, securing and making good to disturbed surface complete all as specified and directed

M&L for complete removal of existing treatment of walls and applying two coats of Oild bound distemper with a thin layer of 2 mm thick wall care putty complete all as specified.

M&L for complete removal of existing treatment of ceiling and applying two coats of Oild bound Distemper over a coat of primer complete all as specified.

Taking down chowkhats with shutters (without taking off shutters from the frame) area n exc 1.5 sqm each all as directed by Engineer-in-Charge.

Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but n. exc 4 sqm each complete all as directed by Engineer-in-Charge.

Supply & fix in repair stainless steel decorative type drapery rod finnial, end socket etc complete.

S&FSolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

M&L for 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fix

M&L for 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fix

S&f 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

S&F Steel windows/ venitlators fixed type , complete with glazing bars, dovetailed or welded

S&F Sheet glass, 4mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised

S&F 200 mm long Aluminium anodised, barrel tower bolts of ex?truded section and fixed

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Excavating in post holes in soft / loose soil (or similar holes) each not exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in hard/dense soil complete all as specified

M & L for PCC 1:3:6 Type C-2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of plain or corrugated plain or corrugated steel sheeting , any gauge , thickness, including nainital pattern roof covering all as specified and as directed

S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with with screws and washers, in roofs, walls etc.

Distmantling of wrought iron or mild steel work of any description not otherwise specially provided for all as specified and as irected

M&L for steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes confroming to IS 1161 1979 grade st 240 etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as directed by the Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking out for key, scrubbing down with water etc complete all as directed.

M&L for Rendering 15 mm thick on fair faces or brick work or concrete surfaces in cement mortar (1:4) and finished fair and even complete

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thick (below or above ground level complete all as directed by Engineer –in-charge.

M&L cement concrete 150 mm thick type B2-1:2:4 ( using 40 mm graded aggregate) as in flooring etc complete all as specified and directed.

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound with Grade B

M&L for Forming Contraction (Dummy) joints 50mm deep x 10mm wide, filled with sealing compound Grade B

M&L for Finishing surface of concrete roads, pavements, by brooming

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M & L for Finishing walls with Acrylic Smooth exterior paint of required shade Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm Super white or approved shade with 3mm thick wall Care putty. Make : Apex Brand (Asian Paint)

M & L for preparation of old decorated surface of wall, roof or sheet any type and applying two coat of ACE exterior emulsion paint with 3mm thick wall care putty (Asian Paint) complete all as specified and directed

S & F mapple wood surface finished with 21mm thick, 55 to 85mm width and in random length in tongue and groove shape. Mapple wood runners of 70mm x45mm treated with anti termite solution and fixed in the bottom side with 10mm thick EPDM air cushoning pads by nails through the two wings at 350mm c/c as approved by Engr-In charge.

S&F Pre painted galvalume aluminium zinc coating GI base plain steel sheet 0.50mm thick (TCT) of an colour having minimum tensile strength of 550 Mpa as ridge in roof fixed with self tapping screws as specified in particular specifications. Note :- (i) Outer colour of sheet shall be as approved by GE based on availability from manufacturer. (ii) Work shall be executed by the manufacturer's authorised Vendor only.

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for Providing & fixing semi perforated 12mm thick micro tegular edged false ceiling at all heights with GRG (Glass fiber Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99%,NRC 0.50 to 0.75 as per IS : 8225:1987, non combustible as per BS 476( Part 4) -1970 and light reflectance of 85 % (minimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanised iron section of 0.33 thick (galvanised @ 120 grams per Sqmincluding both sides) comprising of main -T runners of size 15x32mm of length 3000mm, cross - T of size 15x32mm of length 1200mm and secondary intermediate cross -T of size 15x32mm of length 600mm to form grid module of size 600mmx600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per Sqm) i.e. 50mm long,8mm outer diameter M-6 dash fastner, 6mm dia fully threaded hanger rod up to 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of rawl plug at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specification, drawing and as per direction of Engineer in Charge.

M&L for 15 thick rendering on surface other than fair faces on brick wall or stone wall in CM 1:4 finishing the surface fair and even complete all as Spd & directed

M&L for 5 mm thick celing plaster in CM 1:3 on new or old surfaces including finishing without using extra cement complete all as speciifed and directed by Engr-in-Charge.

Demolition of brick work or stone masonry built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as spd & directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & including chalk whiting complete all as specified and directed.

M&L for Complete removal of existing treatment on wall surface and applying two coat of 1st quality distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over 2 mm thick wall care putty complete all as specified and directed.

M&L for preparing new plaster or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for Vitrified ceramic dark shade tiles 10mm (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors & wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement mortor 1:6

Demolition & breaking AC drain pipes (salt glzed ware, AC,PVC, RCC) set in cement mortar,dia of pipe 100 mm

S&F 110 mm bore PVC (SWR) pipes single socket in any length with rubber ring jointed to fixed to wall complete all as spd & directed

Supply and fix vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications. Note : Vitreous china wall hung wash hand basin cat Part No. CONCORD S2040112, Pedestal cat part No S2090107 & chromium plated brass centre hole basin mixer cat part No F2002461 of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.

S&F powder coated anodised aluminium (sliding/ hanging/ fixed type) windows/ventilator with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised snape beading, screws etc with 5mm thick tinted/ plain glass in panels incl all fitting and fixture complete all as spesified and directed .

M&L for powder coated anodised aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos,aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stoper 01 Nos, jointing cleats,glazing cleats,rubber packing , anodised aluminium shape beading, screws etc with panelling in two parts with 12mm thick prelaminated partical board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as spesified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over screed 5 mm thick screed bed in CM 1 : 6 complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed etc all as spd & directed by engr-in-charge.

S&F POP false ceiling over GI snap grid permiter wall channel 25x25m fixed on wall all round, GI main ceiling channel with flange 50x25mm @ 250mm C/C, cross GI channel section 25x12 mm @ 750 C/C alongwith the suspenders of GI angle 25x25 mm @ 1200 mm C/C. The 20 to 25 mm thick POP lath pastering over n. less than 0.56 mm thick wire gauge in complete ceiling incl form work. Ration of POP and wall putty (1:10) and applying two coats of oil bound distemper incl chalk whitening and priming in alkali restant incl preparing the surface complete all as specified

S&F POP false cornoces matching with existing POP false ceiling and wall putty (1:10) and applying two coats of oil bound distemper incl chalk whitening and priming in alkali restant incl preparing the surface complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC wall lining consisting of 5 mm thick any colour or pattern single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frames as specification and drawing. Make: Raj shree

S&F 5 mm thick Solid PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to the wall with screw make PVC frame all as per specification and drawing. Make: Raj shree

S&F in repaire sinks made of stainless steel one mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with plugs, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each

S&F in replacement of converntial lighting arrestor for providing level I- High protection to the between hanger No 96&7), SRE, hanger NO 5, CADF of by using a single Tercel Tz 63 advanced lighting arrestor including taking down complete all as specified and directed.

S&F in replacement of tubular MS painted mast 9 meter long above the ground (2 meter below ground) at a strategic location with in the vicinity of 3 meter of the hanger No 7 out side alongwith guying arrangement & foundation work with all necessary accessories for installation of advanced lightening arrestor including taking down complete all as specified and directed.

S&F down conductor ISI marked 70 Sqmm PVC insulated copper flexible wire including both end termination suitable size cable clamps etc from advanced lighting arrestor upto the earth pit terminal including taking down complete all as specified and directed.

Supply, installation and replacement of existing 6 digit seven segement Tercel LCD sarge counter in IP67 enclosure alongwith mounting clamp etc complete all as specified and directed.

Supply, installation, testing & commissioning of Tripod chemical earthing (i.e three chemical earthing are individually connected in delta form through copper strip) including taking down complete all as specified and directed. Note : (i) Three Nos 3000 mm long 50 mm dia copper bonded rod with top removal compound filling cap, seepage holes, stainless steel fasterners, HDPE lockable earth pit cover cump inspection chamber alongwith minimum 150 Kg of earth enhancement back fill compound including digging of pits. (ii) Copper earthing strip 25x3 mm for interconnection of all three pits alongwith necessary clamps & brazing (iii) Any other accessories including design modifications to achieve the required earth termination rod resistance value below 1 ohms or as per the OEM / international standard recommendation.

Supply and fixing of 20 x 3 mm copper strip on surface or in recess for connections etc including both end termination, suitable size strip clamps & brazing etc, from equipment to the earth pit terminal / Earth test link

Supply and fix test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos. 8 mm dia 25 mm long hex head screw.

Supply, laying, jointing & testing of underground LT cables XLPE insulated, PVC sheathed, aluminium conductors, multistranded, armoured heavy duty 1100 Volt grade cross sectional area 25 Sqmm 3.5 core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs including taking out Note :- (i) Excavation, earth work, sand cushioning, protection cover and pipe shall be measured and paid for separately under respective items of this schedule. (ii)Fastner,clip etc minor spare parts including in quoted rate

Excavation in trenches/Pits in any type of soil(soft/loose soil), n.exc. 1.5M wide and n.exc. 1.5M deep and getting out complete, all as specified & directed .

Supply and spreading clean and dry sand (unwashed) in trenches around the cable for cushioning all as specified & directed

Supply and laying sub class 'B' bricks (Old Size) laid flat in trenches as cable covers all as specified and directed

S& F Pipes galvanized iron , “Light Grade ”, complete including fittings 40 mm dia all as specified & directed .

M& L for boring holes (manually) under road ,hard standing,without damaging surface for 50 mm dia GI pipe etc complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

S&F Factory made epoxy powder coated Vertical load line distribution boards (VTPN) 6 ways 415 Volt grade with doubled door with acrylec top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 250 Amp copper bus bar netrual bar standard DIN rail. Earth bar and cable ties for cable manangement . top and bottom removable gland plates with Knockouts complete all as specified and directed (Make Legrand/L&T/ABB) Note: MCB/MCCBs shall be measured and paid seperatly under respective item of this schedule

M& L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6.0 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

S& F factory made, sheet metal enclosure distribution boards, double door type, protection class ( IP-42), suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar ,SP and N 12 ways ,220 volts Note: MCB/ shall be measured and paid seperatly under respective item of this schedule

S& F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA all as specified and directed

Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. (iv) Exhaust fan and ceiling fan shall be taken down in under separate item of this schedule.

M & L for point wiring with PVC insulated, PVC unsheathed cable single core, nominal area 1.5 sq mm FR with stranded copper conductor 1100 volts grade drawn into and incl rigid PVC conduit (concealed) 19 mm internal dia with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sq mm unsheathed copper conductor earth wire connected to earth dolly incl metal junction box ,grid plate,base plate suitable for modular switches, sockets, regulators. Note- (1) The rates of chase cutting on wall concealing conduit and steel terminal boxes are included in the unit rates.(2) colour code of wire will be strictly followed , Red for Phase , Black for neutral and green for earth wire(3) Switches & sockets shall be measured and paid for separately.

(a) One light/fan/bellpoint controlled by one switch single pole one way

(b) All as per item No. 125 here-in-before but one 3 pin 5 amp switch socket out let independent .

(c) All as per item No -125 here inbefore but one 3 pin 5 amps socket outlet on the same board with other switch complete .

All as per item No. 125 here-in-before but using 02 Nos. 4.0 sq mm size for main cable and 01 No.4.0 sq mm size as earth conductor for one 16 amp switch socket outlet on independent board.

Supply and fix switch modular flush 6A single pole one way ISI marked (One module)

Supply and fix switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked

Supply and fix modular sockets 6 Amp 2 in 1 2/3 pin combined (Two module)

Supply and fix modular sockets 16 Amp 2 in 1 3/5 pin combined (Two module)

Supply and fix ceiling rose surface bakelite 60x25mm three terminal

Supply and fix electronic step type fan regulator 240 volt 50 Htz 120 watt (switch/sockets type in shape) modular type

M& L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 4.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Supply and fix AC starter unit consisting of one 25 Amp capacity starter, one 240 volt 25 Amp 10 KA SPN MCB, one 25 Amp sockets and one 25 Amp plug top prewired cmplete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fix exhaust fan, mild steel body AC single Phase. 230V of size 380 mm sweep with, blades, and frame and louvers complete with connections.

Supply & fix ceiling Fan ,230 Volts, 1200mm sweep,340 RPM, 210 CMM,230 volts,50 Hz, single phase,star rated complete with all accessories for hang and connecting with 3 run of 1.5 sqm, multicore, PVC insulated copper cable from ceiling rose as specified and directed.

Supply and fix white cover plate with frame 16 module module for modular switches & sockets

Supply and fix metal flush box 16 module 1.6 mm for mounting modular switches & sockets

Supply and fix in replacement of 2x2 feet LED fitting 36 watt system efficiancy 150 lumen/watt with power coated CRCA housing with high power LED with aluminium front frame with flate white high transmission acrylic cover all as specified and directed by Engr-In-Charge Philips cat Part No-RC370BLED30S or equivalent Bajaj/Philips Note-(a) quoted rate shall be includ cost of driver.(b) Light fittings of other make of higher capacity may be used without any price adjustment

S&F in replacement Wall mounted fan, 450 mm sweep, AC, single phase, 230/240 Volts, fixing on wall all as required and connecting with 3 run of 1.5 sqm single core PVC insulated mulstistranded copper conductor cable from ceiling rose. Note :- Fan shall be make : Havells, model 'V3' or equivalent model of make specified in Appendix 'B' to particular specifications. Note :- Old wall mounted fan shall be deposited in the MES store yard of GE Bamrauli and necessary receipt voucher be obtained before claiming the payment against this item

Repair/maint of exhaust fan comprising oiling,greasing,cleaning and refixing the same at location.

Supply, laying, jointing & testing of underground LT cables XLPE insulated, PVC sheathed, aluminium conductors, multistranded, armoured heavy duty 1100 Volt grade cross sectional area 16 Sqmm 2 core.

Supply anf fix Factory made sheet metal enclosure distribution boards, (protection class IP-65) double door, vertiical type suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, SP and N, 8 ways, 240 volts, Make Legrand/Hager/siemense Note : MCBs shall be measured and paid for separately under respective item of this schedule.

Supply and fix in replacement MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs catered herein before.. Make Legrand/Hager/siemense

Supply and fix MCB, single pole and neutral, 230 volts, 40 to 63 Amp rating, 'C' series fixed in DBs catered here-in-before. Make Legrand/Hager/siemense

S & F single phase electronic Energy meter LCD display 5-60A current, 240 Voltage Accuracy class I as per IS 13779 frequency 50 HZ alongwith transparent meter box complete all as specified and directed.

S&F LED light fitting 1x10 W Bulk head luminaries incl LED light driver , holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed .

S&F LED light fitting mirror type with high out put diffuser 2 ft ,1x10 W ,220 V AC decorative type with driver holder and LED lamp incl connecting up wwith 3 core copper conductor cable of suitable size complete all as specified and directed .

Supply and fix MCB distribution board, double door, 8 way, AC , single phase , 240 volts , bus bar 200 Amps rating and earth bus & din rail suitable for MCB as incomer of 8 Way complete.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

Pleiad Complex On

R.K.ASSOCIATES

chauhan construction

M/S KESHRI WORKERS