REPAIR MAINTENANCE OF MISC B/R WORKS IN HQ SWC CAMP, SSOI, SSA, APS, APPS, YSI AND OTHER AREA UNDER ZONE I AREA AT JAIPUR MIL STN

Amount

M&L preparation of old decorated surfaces of walls, pillars and cornices, including brooming down and cleaning the surfaces and applying two coat of white wash complete all as specified & as directed.

All as per item No 01 above but one coats of white wash on ceiling surface.

M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying two coats of distemper (Oil emulsion) of approved tint all as specified and directed(Make: Berger/AsianPaint/Nerolac etc.)

M&L preparing old surface of ceiling and applying two coat of distemper (Oil emulsion) of approved tint all as directed. (Make: Berger/AsianPaint/Nerolac etc.)

M&L preparation of old decorated surfaces of walls and applying two coat of cement base paint of approved tint all as specified and directed.

M&L preparing old painted wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint of approved tint all as specified and directed.

M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for preparation of old decorated surfaces of walls and applying two coat of weather proof exterior emulsion paint (Weather coat smooth) complete all as specified and directed.

S&F in repair Door closer aluminium anodized extrudedsection body hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg as in repairs.

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc etc incl dismantling of old existing tank complete all as specified in SSR Part I,

S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl dismantling of old existing tank complete all as specified in SSR Part I,

S & F 2000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl dismantling of old existing tank complete all as specified in SSR Part I,

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 20 mm dia and fixed (Minimum Weight 210 gms)

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 25 mm dia and fixed (Minimum Weight 210 gms)

S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor incl taking up or down existing steel tubing complete all as specified and directed

S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor incl taking up or down existing steel tubing complete all as specified and directed

S&F GI tubing medium grade with all fitting 25 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor incl taking up or down existing steel tubing complete all as specified and directed

S&F GI tubing medium grade with all fitting 40 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor incl taking up or down existing steel tubing complete all as specified and directed

M&L taking down Aluminium door & refixing the same after necessary adjustments and repair including providing necessary beading complete all as specified and directed by EIC.

Hacking out old broken glass (any thickness, size, quality or description) from metal/aluminum frame including punching or drilling out old glazing pin/spring/ clip complete

S&F sheet glass 3.00mm thick ordinary quality and glazing with beads fixed with metal panel pin in square n.exc 0.5 Sqm each .

S & F 5.5mm thick plain sheet glass ordinary quality to aluminium door/ window in sqaures not exc 0.5 sqm in each pane complete

S&F 8mm thick toughened coloured glass including all type carving lining work as in window(size not exceeding 10 Sqm Each) incl necessary scaffolding of appropriate design utp a height of 06 storey from finish / average ground level complete all as directed by Engineer-in-Charge.

S&F 12mm thick toughened coloured glass including all type carving lining work as in window, Partition wall, urinal partition & others (size not exceeding 10 Sqm Each) incl necessary scaffolding of appropriate design upto a height of 06 storey from finish / average ground level complete all as directed by Engineer-in-Charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L coloured Non Skid joint free ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set over 15mm thick screed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set over 15mm thick screed in CM 1:6 jointed in neat cement slurry and pointed in white or coloured cement to match ,light shade.

M&L Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm,on vertical surfaces such as skirting, dados and risers to steps ,wall etc set over 10 mm thick cement plaster in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match colour of the tile.

M&L Non skid coloured joint free ceramic tiles 7mm to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 15 mm thick screed bed in CM 1:6. Make - Orient/Somani/Kajaria/Johnson or equivalent

M & L glazed coloured joint free ceramic tiles 300x600x7 to 8 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat on surfaces other than fair faces of brick work in CM 1:4 complete. Make - Orient/Somani/Kajaria/Johnson or equivalent

M & L glazed coloured joint free ceramic tiles 300x450x7 to 8 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete.

M & L ceramic tiles blue in colour (Swimming pool floor) tiles 240mmx120mm x 8-10mm thick set and jointed in floor with chemical adhesive of approved thickness 10-12 mm and pointed in white or colour cement complete all as specified and directed by EIC.

M & L for glazed coloured ceramic swimming pool tiles of size 240 x 120 x 7 -8mm thick in wall etc jointed with appropriate adhesive as per manufacturers instruction and pointed in white or colour cement to match the shade of tiles.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar

M&L for Granite (of any tpe), 16 to 18mm mm work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L moulding to granite stone 16 to 18 mm round complete including polishing

M&L machine pressed precast concrete interlocking coloured rubber moulded paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement and pigment laid over 25mm thick sand cushion complete all as specified and directed. Note : Sand for cushioning shall be measured and paid seperately.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M & L machine cut kota stone slab flooring 20-25mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Taking down door chowkaht or frame of any description area n.exc 1.50 Sqm each without taking off shutters from the frame complete all as specified and directed.

Taking down door chowkaht or frame of any description area exc 1.50 Sqm but n exc 4.00 Sqm each without taking off shutters from the frame.

S & F mild steel framed work as in door frame of angle or other section and fixed with angle cleats and connecting plates etc of Gde E-165 (Fe-290) Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate

S & F IInd class hard wood factory made plain framed panelled shutter 35 mm thick (two panels) with lock rail & panel of 9mm BWP commercial ply/ 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated

S&F of 30mm thick 2nd class hard wood glazed, gauged skeleton shutter open rebated and prepare to receive glass, gauge etc divided into square as edge of framing plain chamfered or rounded cut mitred and rebated sash bar of any number for windows , ventilators etc are provided with stiles and rails as specified in SSR Part-I, Section-8 clause 8.24(a).

S&F 30mm thick flush door shutter solid construction, with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 300mm lomg mild steel sliding door bolt clip type stove enamelled black with bright bolt not less than 12mm dia with & including a min of six bolt & nut, four on bolt plate & two on staple plate

S & F 150mm long mild steel pressed handles oval type stove enamelled black complete

S&F 150 mm long Aluminium anodised barrel tower bolt of extruded section

S & F 100mm butt hinges medium weight cold rolled mild steel and fixed complete

S & F aluminium door stopper 150mm size with double pin and rubber shoe fixed to bottom rail of door shutter complete

M&L preparing new wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint of approved tint all as specified and directed.

M&L preparation of new painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

S&F in repair viterous china extended wall hung WC white bowl size 775mmx360mmx660mm including dual flush fitting and cisturn and including soft close seat cover all as specified and directed

S&F in repair viterous China counter wash hand basin white size 520mm x 520mm x 115mm fixed with white cement or silicon complete all as specified and directed

S&F as in repair waste coupling of PTMT 32mm size half or full threaded with minimum weight 32mm -45 gms suitable for urinals

S&F as in repair bottle trap of PTMT 32mm bore with 300mm long wall connection pipes with minimum weight 32 mm- 260 gms.

S&F as in repair Urinal waste pipe 32 mm size of appropriate length with waste coupling complete all as specified and directed by EIC.

S&F in repair PVC syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets, complete all as specified and directed by EIC.

S & F in repair PVC connections 600mm long suitable for 15mm bore GI pipe including PTMT nuts on both sides complete.

S& F in repair Chromium plated Urinal spreader for urinal complete all as specified and directed by EIC . Cera/Jaquar/Parryware etc. or equilant as approved by EIC.

Supply and fixing anodised aluminium window and ventilator shutters, side hung typewithout sash, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium fittings such as peg stays 150mm long 1 No, hinges type B-21, 100mm long (2 No) suitable handle 1 No complete

S & F in repairs 15mm bore Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed down for iron pipe and fixed complete. Make - Marc, Parko, GEM

S & F in repair long body quarter turn type 15 mm bore Pillar cock with swan neck spout and aerator complete all as specified and directed. Make : CERA cat No F20007104 or equivalent as approved by GE.

S&F in repair vitreous china Pedestal pattern EWC S trap white bowl size 655mm x370mm x730 mm including cistern complete all as specified and directed. Make : CERA Cat No S1013124 or equivalent as approved by GE.

S&F in repair vitreous China urinals, half stall long body type(back or corner wall type) of size 375x390x590mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, Make : CERA Cat No S4020112 or equivalent as approved by GE

S&F in repair 15 mm bore CP Angle valve cast copper alloy screwed down high pressure with capastan head, screwed both ends for iron pipe or for unions.

S&F as in repair electronic flushing system kits ( batery box,valve, PVC connection, Sonat valve ) range Efs DC suitable for integrated urinal pot complete all as specified and directed. (The replacement and repair of sensor will be done through authorised dealor/agent of of the company. (Make: Cera/Rak/Jaquar)

Demolition wall and ceiling boards (fibre pulp, insulation etc) or insulation board/ slabs/ blankets, any thickness including cover fillets etc all as specified and directed by EIC.

Providing and fixing in repair suspended false ceiling extra microperforation size of 600 x 600 x 12 mm Ceiling Tiles over suspension metal system (MICRO LOOK) designer grid (15 mm grid 8mm return) including necessary hanging system arrangement which is required to be made from existing rafter and purlins of trussed roof of building all as directed by Engineer-in-Charge. Make : SILHOUETTE X L 15 MM (NOMINAL) of Armstorng make complete or equivalent brand of make as approved by GE.

Providing and fixing in repair suspended false ceiling Panels extra microperforation size of 600 x 600 x 12 mm. Make : Armstong ORCAL or equivalent as approved by GE

M&L for Opening of old false ceiling any type and refixing the same after changing of hanging wire.

M & L for 12mm thick perforated particle board/ tiles for insulation and accoustic purposes of any size fixed with nails to timber frame work or with staples on snap grid on ceiling flat or sloping (As per sample held with AGE B/R-I Sub Divn) and applying two coat of oil bound distemper of any tint including priming the surfaces

M & L for 12mm thick perforated particle board/ tiles for insulation and accoustic purposes of any size fixed with nails to timber frame work or with staples on snap grid on walls flat or sloping (As per sample held with AGE B/R-I Sub Divn) and applying two coat of oil bound distemper of any tint including priming the surfaces

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

S & F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40 mm and fixed with stainless steel wire staples

S&F cupboard handle and lock godrej pattern fixed with screws, nut bolts etc including washer of mild steel bright finish all as specified

M&L in repair 19mm thick MDF membrane kitchen cabinets door shutter, cub boards, lockers etc in coloured, complete all as specified and directed

S&F continuous (piano) hinges, width of flaps 30mm, brass bright finished complete all as specified.

S&F 40mm dia, cupboard knobs of Brass fixed with nut, screw and washer of mild steel, bright polished complete.

S&F in repair brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified fixed

S&F in repair Auto close hinges, stainless steel, bright finish or electro galvanised.

S&F as in repair cromium plated brass hand shower (health faucet) with 8mm dia 1.00m long flexible tube and wall hook complete all as directed. Make : CERA Cat No F8030401AB or equivalent as approved by GE

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.

S&F in repair Chromium plated jet spray suitable for EWC, complete all as specified

S & F in repair EWC seat cover colourd match to EWC complete all as specified & directed.

M&L for hollow /fluted polycarbonate sheets 6 mm over all thickness with two walls seprate by ribs in roof fixed at joint with suitable notched for strip Aluminium beads, filled with silicon jel and edge of sheet shall be covered suitable light Aluminium section ( Make :- PDM sourcing, canco fasterns, sun pack plastic or equivalent as approved by GE)

All as per item No 88 above except sheet

S& F in repair syphon for one piece EWC complete all as specified and directed by EIC . (Make :- Cera/Jaquar/Parryware )

Less Schedule of Credit

J.J.ENGINEERING (BID ID -3149936)

ANKIT BUILDERS (BID ID -3149448)