Addition and Alteration of existing office block of Mechanical Sub Division and Manifold by way of partitioning false ceiling etc. at SKIMS Medical College and Hospital Bemina Srinagar.

Amount

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15).Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, kg 371.95 minimum anodic coating of grade AC 15)

Providing and fixing 12mm thick prelaminated particle boardflat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-l type-11) in panelling fixed in aluminium doors, windows shutters and partitionframes with C. P. brass I stainless steel screws etc.complete as per architectural drawings and directions ofengineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg I sqm).

Providmg and fixing IS: 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer,(having superior brand) embossed on the body, door weight upto 36-80 l<g and door width upto 700-1000 mm with double speed adjustment with necessary accessories and screws etc.complete.

Providing and fixing aluminium round shape handle of outer dia 100mm with SS Screws etc. Complete as per the direction of Engineer-in-charge Anodized (AC-15) Aluminium.

Providing and fixing steel roller for UPVC/Aluminium sliding door with necessary screws etc. complete.

Providing and fixing aluminium Sliding Door Bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 300x16mm.

Providing and fixing aluminum tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminum handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm.

Providing and fixing fly proof galvanised M.S wire gauze to windows and clerestory windows using galvanised M.S wire gauge with average width of aperture 1.4mm in both directions with wire of dia. 0.63mm including steel screws etc all complete.

Providing and laying of dry stone soling in foundation on horizontal level including watering, ramming, loading, unloading and all carriages, leads , lifts ,head loads complete job.

Providing and laying in position cement concrete specified grade excluding the cost of centering and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) including all carriages, leads & lifts head loads complete Crushed.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including all carriages, leads, head loads and lifts etc.

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate. Crushed.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars including all carriages, leads, head loads and lifts complete job.

Providing and fixing 18mm thick commercial ply board of approved quality with necessary screws, nails and fixed on wooden/steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately) including cost of nails, screws carriage, loading, unloading all complete.

Providing and fixing 6mm thick commercial ply board of approved quality with necessary screws, nails and fixed on wooden/steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately) including cost of nails, screws carriage, loading, unloading all complete.

Providing and fixing decorative high pressure laminated dulmica sheet of plain gloss/matt/suede finish with high density protective sirface layer and reverse side of adhesive bonding quality, including cost of adhesive of approved quality 0.8mm thick. (Dulmica).

Providing and fixing wooden moulded beading to frames/edges of partitions/counters with iron screws, plugs etc. complete. 1st class Budloo wood. (12mmx19mm size).

Providing & fixing magnetic catcher in cup board/ward robe shutters including fixing with necessary screws etc. Complete (Best make of approved quality) Triple strip (Vertical type).

Providing and fixing of High finished wooden handles to cupboard shutters including screws, nails complete job.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface. Water thinable cement primer.

Destempering with 1st quality Acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete as per manufacturers' specifications. One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work.

M/S AADHITYA CONSTRUCTIONS

M/S ABDUL SAMAD MIR