Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance R O VILLAGE KOTLA TEHSIL KATRA DISTRICT REASI | Admitted-Finance |
Tender Value
₹9.3 L
Closing Date
13 Feb 2021, 2:00 pmClosed
EXECUTIVE ENGINEER JMC DIVISION-III JAMMU
EXECUTIVE ENGINEER JMC DIVISION-III JAMMU
Construction of drain and path in car workshop area opp. Fortune Rivera Hotel in ward No. 19 (including cost of material)
2021_HAUDD_114459_5
JMCD3eNIT28
Open Tender
Civil Works
Item Rate
70 days
JMC
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
EXECUTIVE ENGINEER JMC DIVISION-III JAMMU
Exempted
18 Feb 2021
23 Jan 2021
13 Feb 2021
23 Jan 2021
13 Feb 2021
23 Jan 2021
Amount
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. Including disposal of excavated earth upto 1 mtr from cutting edge,: for All kind of soil
Providing & laying under layer including preparation of ground 75mm thick (un compacted) layer of dry stone aggregate & grouted with sand. (Complete Job).
Providing and Laying in position cement concrete. of specified grade excl. the cost of centering and Shuttering all work upto Plinth level (1:3:6) 1 cement: 3 coarse sand: 6 crushed graded stone Agg. 20mm nominal size
Dumping/filling of stones including supply of stones. In horizontal on level.(Including all leads lifts ).
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level in 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)
Reinforcement for R.C.C works including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.
Centering and Shuttering incl. strutting propping etc. and removal of form work for foundation, footing , bases of columns etc. for mass concrete.
Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size crushed stone aggregate.
12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)
Steel work welded in built up section / framed work including cutting hoisting, fixincg in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railing, brackets, gates and similar works
Laying Water Bound Macadam with specified stone agg. Stone screening and Binding material incl. screening, sorting, .spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete base course with 63mm-45mm nominal size stone screening 13.2mm size including Supplying and stacking of graded stone aggregate at site of size 63mm-45mm (excluding carriages)
Laying Water Bound Macadam with specified stone agg. Stone screening and Binding material incl. screening, sorting, .spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete base course with 53mm-22.40mm nominal size including stone screening 11.2mm size including Supplying and stacking of graded stone aggregate at site of size 53mm-22.40mm
Providing and applying tack coat using hot straight run bitumen of grade 80/100 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications on W.B.M.@ 0.75 Kg/sqm
2 cm premix carpet surfacing with 1.8cu.m. and 0.90 cum of stone chippings of 13.2 mm size and 11.2 size respectively per 100 sqm. and 52kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt 80/1 00 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt.
Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade 80/100 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.
Removal/ disposal of mulba, dismantled/excavated surplus /unserviceable material from the site of work by MT including loading unloading complete job.
Carriage of material by Mech.Transport including load un loading and stacking complete job. a)Sand
b) Stone Aggregate 20mm
c) Stone
Vikas Sharma
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .