WBPWD/EE/HED/NIQ-04 of 2025-2026

Amount

SUB-HEAD 1--DISTRIBUTION WIRING

Distn. wiring in 3x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make: Gloster/Havells/KEI/ RR Kabel/Polycab/Mescab) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish as to GS. Avg. Run - 9 Mtr. [E20-1(iv)]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make: Gloster/Havells/KEI/ Polycab/Mescab) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl.mending good damages to original finish

On Board [E20-3(a)]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid PVC rigid conduit as per GS. (Make: Gloster/Havells/KEI/RR Kabel/Polycab/Mescab)

2x(1.5sqmm)+1x (1.5 sqmm) [E9-1(b)]

2x(4 sqmm)+1x (2.5 sqmm) [E9-1(v)]

2x(6 sqmm)+1x (4 sqmm) [E9-1(y)]

4X(16 sqmm) + 2x(10 sqmm) as ECC [E9-1(g1)]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc including supplying sockets, tapes.[F-5/9]

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. [E-16/7]

20 mm size

25 mm size

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles (i) 19 mm dia 3 mm thick polythene pipe without earth continuity wire [E-3/6]

Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles (i) 25 mm dia 3 mm thick polythene pipe without earth continuity wire [E-3/7]

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works incl. supply & fixing bakelite/perspex top cover by Brass screws as per GS.

(200 x 150 x 65) mm [E-4/11(d) + E-5/13(d)]

(300 x 200 x 65) mm [E-4/11(g) + E-5/13(g)]

SUB-HEAD 2--VTPN,HTPN,SPN DB,MCB,I/L,TPN SFU,C/O ETC

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Make -Legrand/L&T/ABB ELEGANCE/Siemens ) [D9-13]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Make -Legrand/L&T/ABB ELEGANCE/Siemens ) upto 160 A. [D11-15]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Make -Legrand/L&T/ABB ELEGANCE/Siemens ) [D10-14]

Supplying and fixing double door sheet steel(16SWG), powder coated cable end box for Horizontal TPN DB enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. [D12-16]

6 Way Vertical

6 Way Horizontal

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as per GS (Make -Legrand/L&T/ABB ELEGANCE/Siemens ) [D5-6]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make -Legrand/L&T/ABB ELEGANCE/Siemens ) [D6-7 ]

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make -L&T/Havells/Siemens ) [D3-4a]

SUB-HEAD 3-- SUPPLY & LAYING OF CABLES

Supply & Delivery of 1.1 KV XLPE Insulated & Sheathed Armoured Aluminium power cables [ Make Gloster /Polycab /Havells/KEI/Finolex/RR cable] [NS]

4 Core 70 Sq. mm

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed. [F-2/1-b]

Laying of cable of following sizes on wall/surface including S & F MS clams with earthing attachment in 1/2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. [F-1/2]

4 Core 70 Sq. mm .

Laying only Cable above 50 sqmm but not exceeding 400sqmm through existing RCC/ Hume/GI Pipe/open masonary trench for single, 2, 3, 3½ and 4 core. [F-1/3-b]

above 50 sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables.[F-4/7]

4 Core 70 Sq. mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.[F-5/8]

4 Core 70 Sq. mm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required [F-6/11-e]

80 mm dia

SUB-HEAD 4-- PLUGS & SOCKETS

Supply & Fixing 240 V, 3 nos. 6 A & 1 nos 16A, 3 pin Modular type plug socket with 3 nos. 6A & 1 nos 16A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(Make- Legrand / Honeywell / L&T / ABB / Havells / Cabtree as approved by EIC) [E-18/12]-[E-17/3a]-[E-17/4a]+[E-17/3b]+[E-17/4b]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make- Legrand / Honeywell / L&T / ABB / Havells / Cabtree as approved by EIC) [E18-9b]

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works as to GS. (Make- Legrand / Honeywell / L&T / ABB / Havells / Cabtree as approved by EIC) [E-17/1(b)]

6 module

Supplying & Fixing modular type socket /socket (Make- Legrand / Honeywell / L&T / ABB / Havells / Cabtree as approved by EIC), in exsisting Modular board incl. connections as per GS.

6 A 5-pin modular type 5 pin socket [E-17/4(a)]

6 A modular type switch [E-17/3(a)]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E19-17]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Make- Legrand / Honeywell / L&T / ABB / Havells / Cabtree as approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy.connections with PVC Cu wire and earth continuity wire etc.[E17-5a].

Supply & Fixing 240 V, 3 Pin 25 A, modular type plug top with indicator as per G.S. [E17-5b].

SUB-HEAD 5 - SUPPLY & FIXING OF LIGHT FITTINGS

Supply & Delivery 240 Volt,50Hz,4 ft long , Max20 Watt,efficacy-100lm/w, PC body,Al housing Single LED Tube Light fittings complete with all accessories including LED Tube. [Make: PHILIPS /CROMPTON/ wipro or Manufacturer with own NABL accredited lab with valid test certificate ] [NS]

Supply & Delivery 240 Volt,50Hz,4 ft long , Max20 Watt,efficacy-100lm/w, PC body,Al housing Double LED Tube Light fittings complete with all accessories including LED Tube. [Make: PHILIPS /CROMPTON/ wipro or Manufacturer with own NABL accredited lab with valid test certificate ] [NS]

Supply & Fixing of 9/10 watt LED Lamp,B22 cap,CDL on existing battern holder. [Make: PHILIPS /CROMPTON/ wipro or Manufacturer with own NABL accredited lab with valid test certificate ] [NS+C-2/11]

Supply and delivery of 240V AC, 60Watt LED Flood Light Fittings die cast aluminimum housing complete with all accessories lumen output:Min 120lm/w driver rating should be higher than the fittings rating.[Make: PHILIPS /CROMPTON/ WIPRO or Manufacturer with own NABL accredited lab with valid test certificate ]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.[C-2/17]

Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener. [C-2/14-b]

SUB-HEAD 6 -- SUPPLY & FIXING OF FANS

Supply & Delivery of 240 Volt, 50Hz AC Ceiling Fan. BEE star rated (Make -Crompton/ Orient/ Usha) [NS]

65W, 200CMM,1200mm(48'') sweep

75W, 245CMM,1400mm(56'') sweep

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 3x1.5 sqmm flexible copper wire. [C-3/21a]

Supply & Fixing 450 mm sweep, full metal body wall bracket fan( make- orient/ crompton) on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. Length. [NS+ C4/29]

Supply & Delivery of 240 Volt, 50Hz ac Full Metal Body Heavy Duty Exhaust fans (Make-Crompton/orient/EPC ) [NS]

23 cm/230mm (9")(Speed : 1370 rpm)

30 cm/300mm (12")(Speed : 1400 rpm)

Fixing of Heavy Duty Exhaust fans after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:complete with all accessories.

23 cm/230mm (9") [C4/28a]

30 cm/300mm (12") [C4/28b]

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long) [D14-33]

30 cm Exhaust fan (12")

Supplying & Fixing MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [D14-29]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type)(Make - legrand - Myrius / Arterior / Panasonic Vision), on existing Modular GI switch board with top cover plate incl. making necy. connections etc.[E18-10]

Engraving the deptt. number with 10 mm lettering on the body of fan upto 10 letters incl. hifen, stroke or stop. [C3/24a]

Painting upto 10 letters of the engraved number with approved black /red paint as required.[C3/26a]

Extra for additional one letter incl. hifen, stroke and stop. [C3/24b]

Extra painting for additional one letter of the engraved number with hifen, stroke etc. with black or red paint.[C3/26b]

SUB-HEAD 7 -- Outdoor Light

Supply and delivery of 240V AC, 40Watt LED Street Light Fittings die cast aluminimum housing complete with all accessories lumen output:Min 120lm/w driver rating should be higher than the fittings rating.[Make: PHILIPS /CROMPTON/ WIPRO or Manufacturer with own NABL accredited lab with valid test certificate ]

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. as to GS. [18/C-3]

SUB-HEAD 8 -- EARTHING

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (For Morrum Soil: ISI-Medium GI pipe) [ G1-2a]

Excavation of soil for installation of Earth Electrode and filling & ramming. (Soft Soil) [G1-1a].

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.[G2-4a]

Connecting the equipments body to earth busbar including S & F 25 mm × 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. [for Lift & 2 nos. Panels].[G-3/5-d]

SUB-HEAD 9 -- MISCELENEOUS

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board. [D13-20a]

S&F of 32A timer controlled DB for 1no single phase AC in SS double door 12-way DB enclosure (Make:L&T/ Legrand/ABB(E)) with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish.All connections should be made by copper wire of 4mm² & 1.5 mm² and finishing with dowells solderless socket by crimping method incl necessary connection & provision for earthing attachment incl Ferruling & marking with S&F following Electrical accessories as per direction of EIC [for 2 / 1.5 TR AC] i. 240V, 32A DPMCB C curve breaking capacity 10kA (Make:L&T) - 1 no. ii. 240V, 22A, 2P Contactor - 1 nos. [MNX 22, L&T] iii.10A,250V AC ON-OFF-ON SPDT toggle switch with marking (Make-Kaycee Model No:KT1032BY) --1 no.(for Auto/Manual option). iv. 24Hr x 7days programmable Digital timer (Make:L&T Cat no 67DDT0) -- 1 no. v. On & Off Indicator with marking-2 nos. vi.Din rail mounted Terminal Block for Outgoing & Incoming(Make:Elmax Model:KUT4) -- 4 nos vii.6A SP MCB c curve breaking Capacity 10kA-- 1 no(Make:L&T) [NS]

Supply and Fixing SMC Junction Boxes of dimension (250x200x105)mm with IP 67 protection (Sintex / Hensel )make for compound light fabricated With 1 no 4pole DMC 32A terminal stud and 1no 32A 10KA C curve FP MCB (makeLegrand/ABB/ Siemens/L&T) (for outdoor light) [NS]

SUB-HEAD-10: SITC of AC Machines

Supply and Delivery of Inverter type Split Air Conditioner machine having cooling capacity not less than 5000 W, ISSER 3.8 to 4.39, BEE rating not less than 3 star, noise level not more than 50 db. This Split Air Conditioning machine fitted with rotary compressors, LCD Remote and all other accessories suitable for Refrigerant-R32/ R410A. (Make: O-General/ Daikin/ Hitachi/ Mitsubishi Electric/ Mitsubishi Heavy Industries as per approved by EIC/ Authority)

Installation, testing & commissioning of the above said split AC machine incl supply & Fixing required angle iron structure on wall for placing outdoor unit & mending good the damages as per Direction of EIC

Supply & Installation of Extra Add-on items -HVAC graded 5/8''( for suction) & 1/4'' ( For Discharge) copper refrigerant pipe with 9 mm thick nitrile rubber isulation including sgaddle, Screw, isulation tape, Fastner etc for above AC machine as per direction of EIC

Supply & laying 1.1 kv grade, 3 Core, 4 sqmm flexible copper cable with screw, Saddle,nut bolt etc all necessary items needed for connection. (From starter to AC outdoor connection) ( Make- Havells/ KEI/Polycab/Finolex as per approved by EIC)

Supply & laying 20 mm dia, PVC Pipe (heavy type) incl. Fitting accessories for water drainage.

Supply & Delivery of R-32/ R-410A Refrigerant.

SUB-HEAD-11: SITC of Mortuary Cooler

Supply & Installation of 12 body mortuary chamber (Dimension-- L- D-H 12'-10"ft x D-9'-6"ft x H-5-0’ft) costructed with well seasoned & treated wooden frame work, GI mesh wire net, anti-rat protection, 4mm. thick standard size glass tiles layer and 100mm thick thermocol insulative board on walls, ceiling & floor including finishing with cement plastering & suitable painting. Floor will be finished by 50mm thick cement concert casting including neat cement finish after thermal insulation. "U" Shaped drainage arrangement by glaze tiles including S & F siphon system drainage pipe will be in side walls.

Supply & Installation of 415V. 3Ph 50Hz 5 TR Capacity Air Cooled Condensing unit (1W+1S) with R407 refrigerant complete with Sealed Unit compressor, heavy duty Copper Condenser coil, Blower Motor (18" Crompton Greaves), Receiver, Accumulator, Condenser Fan Motor, Service Valve, and LP/HP cut out Switch, Condenser Housing and Complete Angle Iron Unit base with brick foundation for both Stand by unit 8 Body Mortuary cooler)

Supply & Installation of 5 Ton Capacity low temperature cooling coil (Desired Temperature :- 40 ⁰F ± 2 ⁰F) made by heavy duty 5/8 " dia copper pipe with distributor, angle Iron frame with blower motor & base, fan blade and Vibration shock absorption rubber base complete set.

Supply & fixing new mortuary doors (Size 4" x 4" & 4" x 5") for the 8 body mortuary made of well seasoned & treated Sal wood including adequate 4" thick inner outer insulation against heat leakage, covering with 24 SWG Aluminum sheet & finished with paint, complete with door gasket, thickly chromium plated hinges, latches & locking arrangement fixed on the wooden frame work of mortuary chamber.

Supply & fixing new cooling coil inspection doors with wooden frame (Size 4" x 4" & 4" x 5") at the back of the cooling coil made of well seasoned & treated Sal wood including adequate 4" thick inner outer insulation against heat leakage, covering with 24 SWG Aluminum sheet & finished with paint, complete with door gasket, thickly plated brass hinges, latches & locking arrangement fixed on the wooden frame work of mortuary chamber.

Construction of cooling coil base by bricks, sand and cement with required necessary masonry work inside the cooling chamber including insulation of the same by 4" thermocol, wire mesh net, "U" hocks with plaster finish and neat cement at the top of the base to accommodate 2 no's cooling coil for each chamber.

Supply & Installation Complete arrangement of 4 track-2 tire self type structure of welded 3” x 3” x 3/8 “ angle iron with necessary cross sectional joint for accomodating the mortuary trays would be insulated inside of the morgue as per drawings. The structure will have two coats of red oxide and two coats of grey enameled paint.

Supply & Charging R –407Gas.

Supply & Delivery, fixing of Mortuary tray each having dimensions 24"x72" long & fabricated by 20 SWG SS Sheet & placed on requisite angle iron frame on (40mm x 40mm x 6mm) complete. With 4 Wheels MS pin and Handel including sliding arrangement on the frame for pulling the trays on wheels.

S & drawing refrigerant pipe lines for suction line, Discharge line, Condenser to receiver pipe line of with suitable sizes copper pipe including S& Fixing Thermostat Switch, Expansion Valve, Solenoid Valve, Hand Shut off Valve, Drier, Dial type Thermometer, necessary brass flayer nut, suction line insulation complete in all respect as per direction of E.I.C

Cost of Thorough testing of the complete Installation of the Plant including High pressure dry Nitrogen gas pressure testing 48 hrs, with thorough system vacuum testing 48hrs,with testing the plant proper maintaining desired temperature.

Supply & Installation of wall mounting cubicle type 415 Volt, 50 Hz. electrical control panel fabricated from 40 x 40 x 5 mm MS angle and 40 x 5 mm MS flat & painting with 2 coats of Synthetic Enamel paint over 1 coat of RO primer & earthing attachment comprising with following electrical accessories & interconnection with suitable copper wire including wiring in between panel board to condensing unit & cooling unit motor with inter locking connection by suitable size of copper wire from condensing unit to control panel through PVC rigid pipe incl. proper earthing arrangement.

INCOMER: 415V, 63 amps TPN MCB (10 KA, C-Curve) (Make-Legrand/ABB/Schneider) - 1 no

BUSBAR: 415V, 63 amps Cu. busbar

OUTGOING: 440 V, 32 amps TPN MCB (Make-Legrand/ABB/Schneider) - 2nos

CONTROLLING: 415 V, MUG Starters with over load relay (relay rang 9-14 amps), ( Make-LT/LK MUG-10) -2 nos

INDICATORS: 3 nos LED R, Y, B indicators (Siemens) with 3 nos 250V, 6A SPMCB (10 KA, C-Curve) (Make-Legrand/ABB/Schneider)

SAFETY: Single Phase Preventer & EI Danger board 1 no.

Supply & Installation of 08 body mortuary chamber (Dimension-- L- D-H 8'-6"ft x D-9'-6"ft x H-5-0’ft) costructed with well seasoned & treated wooden frame work, GI mesh wire net, anti-rat protection, 4mm. thick standard size glass tiles layer and 100mm thick thermocol insulative board on walls, ceiling & floor including finishing with cement plastering & suitable painting. Floor will be finished by 50mm thick cement concert casting including neat cement finish after thermal insulation. "U" Shaped drainage arrangement by glaze tiles including S & F siphon system drainage pipe will be in side walls.

Supply & Installation of 415V. 3Ph 50Hz 5 TR Capacity Air Cooled Condensing unit (1W+1S) with R-407 refrigerant complete with Sealed Unit compressor, heavy duty Copper Condenser coil, Blower Motor (18" Crompton Greaves), Receiver, Accumulator, Condenser Fan Motor, Service Valve, and LP/HP cut out Switch, Condenser Housing and Complete Angle Iron Unit base with brick foundation for both Stand by unit 8 Body Mortuary cooler)

Supply & Installation of 5 Ton Capacity low temperature cooling coil (Desired Temperature :- 40 ⁰F ± 2 ⁰F) made by heavy duty 5/8 " dia copper pipe with distributor, angle Iron frame with blower motor & base, fan blade and Vibration shock absorption rubber base complete set.

Supply & fixing new mortuary doors (Size 4" x 4" & 4" x 5") for the 8 body mortuary made of well seasoned & treated Sal wood including adequate 4" thick inner outer insulation against heat leakage, covering with 24 SWG Aluminum sheet & finished with paint, complete with door gasket, thickly chromium plated hinges, latches & locking arrangement fixed on the wooden frame work of mortuary chamber.

Supply & fixing new cooling coil inspection doors with wooden frame (Size 4" x 4" & 4" x 5") at the back of the cooling coil made of well seasoned & treated Sal wood including adequate 4" thick inner outer insulation against heat leakage, covering with 24 SWG Aluminum sheet & finished with paint, complete with door gasket, thickly plated brass hinges, latches & locking arrangement fixed on the wooden frame work of mortuary chamber.

Construction of cooling coil base by bricks, sand and cement with required necessary masonry work inside the cooling chamber including insulation of the same by 4" thermocol, wire mesh net, "U" hocks with plaster finish and neat cement at the top of the base to accommodate 2 no's cooling coil for each chamber.

Supply & Installation Complete arrangement of 4 track-2 tire self type structure of welded 3” x 3” x 3/8 “ angle iron with necessary cross sectional joint for accomodating the mortuary trays would be insulated inside of the morgue as per drawings. The structure will have two coats of red oxide and two coats of grey enameled paint.

Supply & Charging R –407Gas.

Supply & Delivery, fixing of Mortuary tray each having dimensions 24"x72" long & fabricated by 20 SWG SS Sheet & placed on requisite angle iron frame on (40mm x 40mm x 6mm) complete. With 4 Wheels MS pin and Handel including sliding arrangement on the frame for pulling the trays on wheels.

S & drawing refrigerant pipe lines for suction line, Discharge line, Condenser to receiver pipe line of with suitable sizes copper pipe including S& Fixing Thermostat Switch, Expansion Valve, Solenoid Valve, Hand Shut off Valve, Drier, Dial type Thermometer, necessary brass flayer nut, suction line insulation complete in all respect as per direction of E.I.C

Cost of Thorough testing of the complete Installation of the Plant including High pressure dry Nitrogen gas pressure testing 48 hrs, with thorough system vacuum testing 48hrs,with testing the plant proper maintaining desired temperature.

Supply & Installation of wall mounting cubicle type 415 Volt, 50 Hz. electrical control panel fabricated from 40 x 40 x 5 mm MS angle and 40 x 5 mm MS flat & painting with 2 coats of Synthetic Enamel paint over 1 coat of RO primer & earthing attachment comprising with following electrical accessories & interconnection with suitable copper wire including wiring in between panel board to condensing unit & cooling unit motor with inter locking connection by suitable size of copper wire from condensing unit to control panel through PVC rigid pipe incl. proper earthing arrangement.

INCOMER: 415V, 63 amps TPN MCB (10 KA, C-Curve) (Make-Legrand/ABB/Schneider) - 1 no

BUSBAR: 415V, 63 amps Cu. Busbar

OUTGOING: 440 V, 32 amps TPN MCB (Make-Legrand/ABB/Schneider) - 2nos

CONTROLLING: 415 V, MUG Starters with over load relay (relay rang 9-14 amps), ( Make-LT/LK MUG-10) -2 nos

INDICATORS: 3 nos LED R, Y, B indicators (Siemens) with 3 nos 250V, 6A SPMCB (10 KA, C-Curve) (Make-Legrand/ABB/Schneider)

SAFETY: Single Phase Preventer & EI Danger board 1 no.

Dismantling and cleaning the old mortuary chamber as per direction of EIC.

i) Rate should be Quoted inclusive of all taxes, other charges & L.W.C (if any). ii) Work should be completed as and when required and as per the direction of the administration.

Shinryo Suvidha Engineers India Pvt. Ltd. (BID ID -6518601)

M/s Singh Electrical Works (BID ID -6506331)