PROVN OF DENTAL LABORATARY FOR POSTEHTIC WORK, PROVN OF COVER SHED MT GARAGE FOR PARKING OF VEH AND OTHER SANCTIONED WORK OF AGE B/R-I AREA UNDER GE PANAGARH

Amount

Surface excavation n.exc. 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavation over area ,not exc 1.5 mtr deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil ,complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc. 0.5 Cum and getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making surface good ,complete all as specified and as directed.

Returning, filling in incl spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft /loose soil complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.

Removing excavated soils to a distance exc. 250m but n.exc 500m and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L moorum filling/red bajri filling in floor or paving laid in laying n exc 15 cm thick spread levelled and rammed including watering complete all as specified and directed.

Materials and Labour for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregates) as in plinth protection,complete all as specified and directed.

Materials and Labour for 100 mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base in floor/paving/hardstanding ,complete all as specified and directed.

M & L for 100 mm thick cement concrete type B-1, (1:2:4) using (20mm graded stone aggregate) as in flooring ,including finishing surface even and smooth without using extra cement complete all as specified and directed.

Materials and Labour for 40 mm thick cement concrete type B-1, (1:2:4) using (20mm graded stone aggregate) as in flooring ,complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base in floor/paving/hardstanding ,complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregates) as in plinth protection, including finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L for damp proof course 40mm thk in cement concrete (1:2:4) type B-0 to horizontal or vertical surfaces including necessary form work complete all as specified and directed.

M & L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade 'A' for 75 mm thick concrete slab complete all as specified and directed.

M&L for hardcore broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 (1:2:4) (20mm graded stone aggregate) in columns, pillars, piers etc, complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed.

Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girder,bressummers, lintels, cantilevers, shelves including supports, overhangs etc, complete all as specified and directed.

Use and waste of formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions for fair finished surface, complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide fair finishes surfaces complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips , complete all as specified and directed

Supply and fix mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for columns, hocking, ends and binding with and incl MS wire (appealed) not less than 0.9 mm dia, complete all as specified and directed.

M & L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade with grey cement and pigment complete all as specified and directed.Note: Design, shade and pattern of fixing of paver block shall be as directed and approved by GE.

M & L for pre-cast cement concrete solid block kerb stone exc 10cm in width ,pcc 1:3:6 type C-1(using 20mm grades s set in cement mortar (1:6) of any shape and size as approved by GE ,incl.necessary excavation and earth work ,returning filling and removal of surplus soil from site ,kerb stone shall be fixed in true line and level or in curves for edging of road side path including embedding pcc pre-cast blocks in ground to any deptha as required and tamping soil around pcc blocks , complete all as specified and directed.

Materials and Labour for Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6),complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

Materials and Labour for non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, in floors etc. over and including 15 mm thick cement mortar (1:6) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, , complete all as specified and directed.Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE.

M&L for glazed cermic tiles 300x200x7 to 8 mm thick in vertical surfaces such as skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing , complete all as specified and directed.

M&L for 100mm sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

M&L for 75mm sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F CI bends 100mm dia , diminishing pieces or tapers (larger bore measured) , complete all as specified and directed.

S&F CI bends 75mm dia , diminishing pieces or tapers (larger bore measured) , complete all as specified and directed.

S&F cast iron cowls for 75mm pipe ,complete all as specified and directed.

M&L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in cement mortar (1:6) etc complete all as specified and directed.

M&L for fly ash bricks straight or curved on plan to any radius in half bricks thick walls, built in cement mortar (1:4) ,complete all as specified and directed.

M & L for rendering 15mm thick plaster in cement mortar(1:4) on fair faces of concrete or brick work external in two layers (10mm thick 1st layer + 5mm thick finishing layer) mixed with water proofing compound as per manufacturer’s instructions on top layer finish even & smooth without using extra cementr complete all as specified and directed. Note: WPC will be measured and paid separately under relevant item.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on fair face of brickwork in walls and finishing surface even and smooth without using extra cement, complete all as specified and directed.

Materials and Labour for rendering 5 mm thick cement plaster in cement mortar (1:3) on ceiling surfaces and finish the surface fair and even and smooth without using extra cement, complete all as specified and directed.

Supply only liquid water proofing compound, complete all as specified and directed.

M&L for preparation of new plastered or un -plastered from walls, and applying two coats of oil bound distemper on walls, over and including a coat of white wall care putty complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying three coats white wash complete all as specified and directed.

M&L for preparation new plastered surfaces and applying three coats of white washing on ceiling complete all as specified and directed.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance and including a coat of white wall care putty complete all as specified and as directed.

Supply and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm , complete all as specified and as directed.

Supply and Fix cast iron floor trap 100 mm dia with grating including jointing to waste pipe in run lead complete and making good the disturbed surface to match the existing surface,complete all as specified and directed.

S&F grating doom 125mm dia of PTMT (Minimum weight 40gms) shade matching to tiles/floor , fixed with white cement including matching shade pigment,complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm single side prelam PVC sheet with edges painted to match with prelam sheet, reinforced with MS square tube, fixed in opening, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.complete all as specified and directed.

Supply and fixing mild steel flat iron of size 30 X 5 mm work as in hold fast and similar small articles including required cutting , bending and fixing complete, mild steel conforming (Fe-410-0 or Fe-310-0) complete all as specified and directed.

M&L PCC (1:2:4) type B-0 (12.50mm graded stone aggregate) as in bed blocks for hold fast including necesssary formwork, complete all as specified and directed.

S&F stainless steel butt hinges, medium weight, and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified and directed.

S&F aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed.

S&F aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified and directed.

S&F powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m for doors, windows, ventilators or framing for panelling with one or more rebates including grill work joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated anodised aluminium door (side hung/sliding type) shutters(minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S & F powder coated anodised aluminium window and ventilator shutter (side hung/sliding type), without sash bar, aluminiumn section weighing 0.55 Kg/Per mtr including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading screws , anodised aluminium fittings such as peg stays 150mm long (1 nos), hinges type B-21 100 mm long (2 nos) ,suitable handle(1 nos ,etc complete all as specified and directed.

S & F powder coated anodised aluminium window and ventilator shutter (side hung/sliding type), with sash bar, aluminiumn section weighing 0.55 Kg/Per mtr including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading screws , anodised aluminium fittings such as peg stays 150mm long (1 nos), hinges type B-21 100 mm long (2 nos) ,suitable handle(1 nos ,etc complete all as specified and directed.

S & F anodised aluminium ornamented grills aluminiumn section weighing 0.55 Kg/Per mtr including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading screws etc complete all as specified and directed.

Supply and Fix,5.5 mm thick froasted sheet glass ordinary quality and glazing with brass screws in squares not exceeding 0.50 Sqm in each pane,fixed to aluminium windows/ventilator. complete all as specified and directed.

Supply and Fix stainless steel wire cloth, 0.36mm nominal dia. of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165, complete all as specified and directed.

M&L prelaminatd particle board,9 mm thick interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply and Laying of supreme Eco drain Hi-tech drainage sewer system pipe bearing 160 mm dia , minimun 4mm thick laid in trenches or floor ,including jointing with coupler , bend tee as per site requirement,s complete all as specified and directed.

M&L for 100 mm thk concrete bed to drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested in cement concrete (1:4:8) type D2 for 150mm dia pipe all as specified and directed.

Supply and fix aluminium (extruded section body) door closer hydraulically regulated designation No-2 universal type, suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F 140mm long floor door stopper of aluminum alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F mortice lock, aluminium body 4 levers, vertical type with two keys of size 150 mm complete all as specified and directed.

S& F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S & F Continuous (piano) hinges/channel mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40 mm complete all as specified and directed.

S& F magnet catches with 8mm dia steel ball and brass body and striking plate , complete all as specified and directed.

S&F 15 mm bore pillar taps, cast copper alloy, withcapstan heads,chromium plated,screwed down highpressure, with or without lettered 'Hot' or 'Cold' withlong screwed shanks and fly-nuts,screwed for iron pipe and fixed,fancy type suitable for 15 mm bore pipe, complete all as specified and as directed.

S&F 15 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, long body with flange ,screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F 20 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, long body with flange ,screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F stop valve 15 mm bore cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions fancy type, chromium plated ,complete all as specified and directed.

S&F stop valve 20 mm bore cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions fancy type, chromium plated ,complete all as specified and directed.

S&F 20mm bore for gun metal glove or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S & F soap dish, vitreous china white, approximate size 160 x 160 x 90mm, complete all as specified and directed.

S & F toilet paper holder, vitreous china, box type complete all as specified and directed.

M&L for 150 mm bore (HDPE) drain pipe laid in trenches and jointed complete all as specified and directed.

S & F PVC (SWR) bends any radius of 150 mm bore with access door complete all as specified and directed.

S & F PVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed.

S & F PVC (SWR) bends any radius of 75mm bore with access door complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

Supply and Fix PVC valve less, syphonic action type, 10 Litres capacity flushing cistern, low level, white, with inlet, ball valve, float and handle, including brackets, flush pipe, complete all as specified and directed.

S & F wash basins, vitreous china, white, flat back, size 580 mm X 450 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.

S & F wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.

S &F vitreous china Wash down water closet (Padestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and jet, fushing cistern low or high level, 32mm dia polyethylene flush pipe etc (excluding cost of flush tank),complete all as specified and as directed.

S & F flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm , complete all as specified and as directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed.

S&F Pre - Painted galvanized aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St-240 complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface not exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

Material and labour wiring for 15 amps socket out let on independent Boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified.

Material and labour wiring for 5 amps socket out let on independent Boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified.

Material and labour point wiring for AC using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified.

Supply and fix switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.

Supply and fix switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fix switch socket combination 2 in 1 , 6 pin , (16 Amps ) flush type controlled by one switch complete all as specified.

Supply and fix ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fix stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

Supply and fix 18 W LED light fitting with T-8 tube ,light fixtures with extruded polycarbonate,complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as specified and directed.

Supply & fix 20 amps motor starter , ISI mark ,240 volts, complete all as specified and directed.

Supply and fixing of bldg security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size ,complete all as specified.and directed.

Supply and fixing LED flood light fittings 30Watts complete with all accessories including connected with twin core twisted flexible copper conductor cable of suitable size including MS clamps, nut and bolts of suitable size for fixing arrangments complete all as specified and directed.

Supply and fix 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.

Supply & fix lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings, complete all as specified.and directed.

Supply & fix LED bulb 7 watts ,240 volts ,ISI marked complete all as specified.and directed.

Supply & fixing metallic exhaust ventilation fan of sweep 230 mm sweep, 230volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with rwin core twisted flexible copper conductor (23/0.0076) of size complete all as specified and directed. Note:- Cost of cutting and making hole for fixing exhaust fan shall be deemed to included in quoated rates

Supply & fixing metallic exhaust ventilation fan of sweep 300 mm sweep, 230volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with rwin core twisted flexible copper conductor (23/0.0076) of size complete all as specified and directed. Note:- Cost of cutting and making hole for fixing exhaust fan shall be deemed to included in quoated rates

Supply & fixing ceiling fan 1200mm size , star 5 rated, ISI mark, 240V, 50 Hz complete all as specified and directed

Supply, laying / fixing / connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts cross sectional area 25 Sqmm x 4.0 core in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed

All as per item No 128.00 mentioned here-in-above but 10 Sqmm 2 Core complete all as specified and directed.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. (Note : Punned thickness shall be measured). Note :- Punned thickness 18 cm shall only be considered for payment

Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed.

Supplying and fix four core ,6 sqmm and 2x6 sqmm earth wire nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC concealed conduits (ISI marked) including 6 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed.

Supplying and fix two single core ,4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC concealed conduits (ISI marked) including 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire, complete all as specified and directed.

Material and labour for Sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core 2.5 Sqmm and single core 2.5 Sqmm PVC insulated FRLS cable with stranded copper conductor drawing into and including PVC non metallic rigid conduit medium grade complete all as specified and directed.

Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door , Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified.and directed.

Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door,vertical type, Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact, complete all as specified and directed.

Supply and fix MCCB TPN 100 Amps, 'C' series 25kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. Note :-Proper and suitable size cable lugs to be fixed with MCCB are included in unit rate of each MCB of any rating

Supply and fix MCCB TPN 125 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. Note :-Proper and suitable size cable lugs to be fixed with MCCB are included in unit rate of each MCB of any rating

Supply and fix MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. Note :-Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating

Supply and fix MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. Note :-Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate 3 of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Supply and fixing of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete all as specified and directed.

M&L for 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection i including fitting like socket /Union/Tee/Reducer Nipple etc complete required will be supplied by Contractor, rate for the same is included in the item rate quoted complete all as specified and directed.

M&L for 40 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection i including fitting like socket /Union/Tee/Reducer Nipple etc complete required will be supplied by Contractor, rate for the same is included in the item rate quoted complete all as specified and directed.

M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed.

M&L for 25 mm bore ball brass valves high pressure with polyethylene float and flynut complete , screwed for iron pipe or brass ferrule , complete all as specified and directed.

Supply & fixing 500 litres capacity rotational moulded polyethylene water storage tanks multi layer (cylindrical vertical with closed top with tripal layer) conforming to IS-12701-96 complete including provision of all inlet, outlet, overflow and drain pipe fittings complete all as specified and directed.

Cutting existing steel tubing for alteration or additions (each cut measured) 25mm bore ,complete all as specified and directed.

UNITED BUILDERS