PROVISION OF AREA DRAIN AT TYPE-III OF DGQA RESIDENTIAL COMPLEX, GHATKOPAR (W) MUMBAI, ADDITION/ ALTERATION AND IMPROVEMENT TO CQAE (WE) TECHNICAL OFFICE AT SECOND FLOOR P-1 BUILDING OF DGQA COMPLEX VIKHROLI AND PROVISION OF SPLIT TYPE AIR CONDITIONE

Amount

Material and labour for Excavation in trenches not exceeding 1.5m wide and not exceed 1.5m in depth and getting out in hard/ dense soil for foundation complete all as specified and as directed by Engineer-in-Charge

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified and as directed by the Engineer-in-Charge

Removing excavated material to a distance exceeding 1.5 Km but not exceeding 5 Km, outside MD land and depositing complete all as specified and as directed by Engineer-in-Charge.

M & L for Hard core of broken stone boulders guage not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick watered and framed to a true surface complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Plain Cement Concrete 1:2:4 type B2, using 40mm graded stone aggregate as in surface channels and drains, benching, haunching etc. including necessary form work for fair finished surfaces and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour extra for forming fair finished drain or channel 30cm inner girth in cement concrete with using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

Add or deduct for each 25mm girth or part there of over or under 30cm ditto

Material and labour for 100mm thick Plain Cement Concrete 1:2:4 type B1, using 20mm graded stone aggregate as in ground floor and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing, path and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for 40mm thick sand filling under floors or in foundation with clean dry fine sand unwashed including gently punning watering and consolidation complete all as specified and as directed by Engineer-in-Charge

Material and labour for machine pressed precast concrete interlocking paver block, of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur

Material and labour for rendering 15mm thick in cement mortar 1:4 on external wall surfaces and finished even and smooth without using extra cement upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge.

Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit

Supply and fix mild steel TMT bars, 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel TMT bars, 6 to 8mm, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Material and labour for providing precast cement concrete, 1:2:4, type B-1 (using 20 mm graded stone aggregate) for manhole / drain covers etc., set in cement mortar 1:4 and finishing the exposed faces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix in position 'L' shape Cubical Workstation as directed Modular workstation comprising of partitions, work surface, Cubical work station will be made of Wood based Interior Grade Prelaminated Particle board with matching PVC edgeband on edges pasted by hotmelt glue on required temperature by Through feed machine L-Shaped Workstation (1500 mm x 450 mm) + (1200mm x 600mm) with following specifications:- (1) Minimum 60-65 mm thk modular partition frame work made out of CRCA MS of grade D minimum thickness of 1.5 mm powder coated 50 microns frame work designed to carry out electrical power & computer wiring in 2 different race ways with a separation of at least 300mm between them including necessary slots. The frame work consists of minimum two vertical upright a top horizontal section, bottom section and intermediate section (minimum 40 mm x 30 mm) The frame structure covering and top trim / side trim made out of Aluminum with powder coating (50 microns). All Aluminum Horizontal and vertical sections are extruded from AA 6063 American standard alloy with T6 HRC hardness of architectural grade (IS 10259:1982) of 18 gauge minimum. The thickness of extruded sections vary based on its design and its point load bearing design engineering. The (skinning / panels / tiles to be of 9mm thk Prelaminated Particle board (Grade II & Type I (IS 12823: 1990; Reaffirmed 2005) till 1200mm height from the floor level for outside facia. Inside facia = fabric panel with soft board with minimum 9mm thickness above table top (450 mm height). 9mm thk Prelaminated particle board panel finished with 0.8mm thk laminate from floor level to top of table top (750 mm height). The edges to be capped (as per approved design and drawing) Aluminum end trim with powder coating. Cost to include that for provision of fixing switches & the necessary cut out for the same. The height of the partition to be 1200mm. As per drawing & direction complete with all standard fittings & fixtures, leveling screws etc. Cost to include the supporting system to partitions & walls such as brackets / fasteners / joining posts / aluminum race ways 2 nos / wire management cleats / runners etc.

(2) Providing and installing 600mm wide Table top made of 25mm thk pre laminated particle board Grade II & Type-I (IS: 12823: 1990; Reaffirmed 2005) finished with 0.8 mm thk laminate, all exposed edges finished with 2mm x 25mm PVC hot pressed lipping of approved profile, all of approved shade and colour. Rates are inclusive of fixing to the partition with necessary powder coated heavy duty MS brackets, cleats etc. for supporting table tops and rates shall include that for 1 nos. matching to top, ABS wire manager (standard size) per work station, complete as per drawings & direction. (3) Providing & installing 480mm wide MS key board pull out tray with 186mmx135mm provision to house mouse made out of MS with black matt finished powder coating with telescopic channel. **(4) Providing & Installing 125mm to 225mm adjustable CPU trolley made out of MS with black powder - matt finish coating with lockable castors (4 nos). **(5) Providing & Installing quarter round ( size 450x 600mm) 10mm thk intermediate toughened frosted glass divider with necessary fittings & hardware above table top. The edges of the glass to be machine polished as per drawing. **(6) Providing & installing 600mm x 725mm Leg panels/gable ends made up of 25mm thick Prelaminated Particle board (laminate on both sides) finished with 0.8 mm thk laminate. All edges to be lipped with minimum 2mm thick PVC edging. As per Drawing and details. (7) Pedestal made of 18 mm prelam particle board with approved brand and shade all the exposed edges of the top shall be provided with machine pressed 2mm thick PVC Edgebanding with hot melt EVA glue, with wooden box with lock and to have necessary hardwares like ss handles. Make: Godrej, TRILLIANT OFFICE PROJECTS PRIVATE LIMITED or Equivalent make

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material and labour for vitrified ceramic tiles, 10mm thick , (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 20mm thick in cement mortar 1:4 including scarifying the floor complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

Material and labour for vitrified ceramic tiles, 10mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, on vertical surfaces etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 12mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles/ Orient bell

Material and labour for complete removal of existing treatment on wall surfaces and applying two coats of distemper oil emulsion with roller over a coat of alkali resistant wall primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge. Make: M/s SHALIMAR / M/s BERGER / M/s NEROLAC /M/s ASIAN (Tractor Brand)

Material and labour for preparation of old plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer in Charge.

Taking down cement plaster on brick or stone walls, ceilings etc., without disturbing brick work, including raking out joints, hacking for key, scrubbing down with water and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for 12 mm thick plastering in cement mortar (1:6) on brick/ concrete surfaces on internal surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 5mm thick plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of undecorated ceiling /wall surfaces and applying 1.5mm wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty

Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints /Birla Opus

Material and labour for preparation of newly plastered ceiling surfaces and applying three coates of white wash complete all as specified and directed by Engineer in Charge.

Taking down chowkats or frames with shutter (without taking off shutter from frame) exceeding 1.5 sqm but not exceeding 4 sqm each including fittings & removing clear off site after credit for the same is recovered by the dept complete all as specified and as directed by Engineer-in-Charge

Material and labour for green marble work 18 to 20 mm thick machine cut, , table rubbed and polished, bedded and jointed as in steps, jambs, pillar, window cills, cooking platform and like bedded and jointed with grey cement slurry and pointing in white cement 1:2 using marble dust with admixture of pigment to match complete all as specified and as directed by Engineer-in-Charge.

Supply and fix powder coated anodised aluminium frame for windows, ventilators, doors, partitions etc with one or more rebates and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

Material & Labour for Powder Coating (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

Supply and fix in repairs 4.0mm thick glass, ordinary quality, in square, exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge

Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. Make: DECOGRILLE of Associated group / Royal Alum grill Pvt Ltd or equivalent make as approved by GE

Taking down carefully copper / aluminium point wiring with PVC casing (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for taking down exhaust fan / Ceiling fan by disconnecting electric connection, dismantling blades, down rod of any sweep, 230 volts, AC, single phase, cleaning of parts and removing dust etc, and refixing with suitable size copper connecting wire etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour incl taking down for point wiring with proper colour coding complete with and including PVC insulated unsheathed, flexible bright annealed multi stranded copper conductor single core FRLS cable 1.5 Sqmm, 1100 volt grade for phase and neutral confirming to IS 694, drawn through in and including (heavy grade) rigid non metallic PVC conduit pipe ISI marked & conduit accessories / fittings / junction box / inspection covers etc of ISI marked and cutting chasing on wall for concealed conduit incl making the surface as per existing surfaces including 1.5mm thick modular MS box with modular cover and top plate for housing modular switches, socket outlets, regulators etc including 1.5 sqmm 1100 volts grade PVC insulated FRLS unsheathed flexible, multi stranded copper conductor cable (green colour) as continuous earthwire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end for one light / Fan / Exhaust fan / ceiling fitting point controlled by one way switch complete all as specified and as directed Make of Cable- Anchor/ havells/finolex /Polycab/Plaza of ISI mark as approved by GE Make of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme

All as per item No. 40 here-in-before but for one 5 Amps switch socket outlet point on independent board

All as per item No. 40 here-in-before but for one 5 Amps socket outlet point on the same board controlled by another switch.

All as per item No. 40 described here - in - before but for one switch socket outlet point, 16 Amps on independent board for concealed type point wiring with 2.5sqmm copper cable single core and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

Supply and fix Modular type switch, single pole, one way, 6 Amps, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make:Anchor / Legrand / Havells/.Crabtree/Leader

Supply and fix ceiling rose, 3 plate, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. Make: Legrand /crabtree/ Honeywell/ Anchor

Supply and fix Modular socket outlet, , 5Pin, 5 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader

Supply and fix Modular type switch, 16 Amps, 1 module, 240v, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make:Anchor / Legrand / Havells/.Crabtree/Leader

Supply and fix Modular socket, 5 in 1, 3 Pin, 5 Amps & 16 Amps , two module, 240v , universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader

S & F ceiling fan regulator modular type two module AC, 230 volts electronic step type complete all as specified and as directed by Engineer-in-Charge. Make : legand/havells/crabtree/Havells/SSK

S&F Extruded Aluminium batten 6500K, 1x 20 watts, 240 volt, 50 HZ, 4 feet LED tube light fitting, batten type with with slim & sleek looks all pre-wired fixed on walls with all fixing accessories such as 2 nos of pvc square/round boxes, screws, clips etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make: Philips Cat Part No : BN021CLED22SPSUCWGR or equivalent in Crompton Greaves /Havells/ Bajaj

Supply and fix wall mounted, split units, indoor and outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 1.0 TR including all necssary copper tube and foam work of suitable size complete all as specified and as directed by Engineer-in-Charge. Make: O General/ Mitsubishi/ Daikin./Carrier

Supply and fix factory made MS bracket fixed on wall with necessary grouting, MS Hold fast, bolts, washer, duly painted and making good of disturbed surfaces suitable for installing outdoor unit 1 TR AC complete all as specified and directed by Engineer in Charge.

M & L for point wiring with 4 sqmm FRLS grade PVC insulated cable 1100 volts grade stranded copper conductor cable drawn through and including in PVC conduit concealed complete with all fittings and accessories and 4 sq mm stranded copper conductor cable FRLS grade PVC insulated earth continuity conductor all as specified and directed and suitable for 1 TR AC controlled by one Switch, including cutting chases on wall/floor etc. making good the disturbed surfaces of wall complete including 1 mm thick modular MS box with modular cover and top plate for housing modular switches, socket outlets/starter, all as specified and as directed Make of Cable-Plaza, Finolex, Havells, Polycab Make of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme-

S&F modular starter switch 25A, two module, 240 V, AC complete all as specified and directed. Make : Legrand Cat part No 6734 69/ Crabtree/ Havells

S&F modular socket 5 in 1, 3 Pin, 25A, two module, 240 V, AC complete all as specified and directed. Make : Legrand Cat part No 6734 50/ Crabtree/ Havells

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 5,885.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

joshua construction (BID ID -3497931)