Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹78.4 LAccepted-AOC 1286 TOTA RAM KI DHANI JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹87.2 L+₹8.5 L (10.8%)Rejected-Finance 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | RAJASTHAN | 334001 | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹87.3 L+₹8.6 L (10.9%)Rejected-Finance 224 OFFICERS ENCLAVE BEHIND PLV MEMORIAL COLLAGE SHIKARGARH ARMY AREA JODHPUR RAJ 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-Finance Other than Lowest | |
| 4 | Rejected-Technical | - | Rejected-Technical Documents as per NIT not uploaded |
Tender Value
₹1.1 Cr
EMD Value
₹1.9 L
Closing Date
23 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (A) Jaisalmer
HQ CWE (A) JAISALMER 345001 (Raj)
REPAIR AND MAINT TO CERTAIN ROADS AND PATHS UNDER AGE(I) POKARAN
2024_MES_675561_1
84233/C/E8
Open Tender
Civil Works - Roads
Item Rate
334 days
POKARAN
AS PER NIT
8 documents required · 8 mandatory
₹1,000
AGE(I) POKARAN
₹1.9 L
Yes
20 Nov 2024
20 Sept 2024
25 Oct 2024
20 Sept 2024
23 Oct 2024
11 Oct 2024
20 Sept 2024 - 27 Sept 2024
Amount
M&L for repair to pot holes any depth area not exceeding 1.0 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to atleast 25 mm in depth, making good by applying tack coat VG-10 at 5 kg per 10 Sqm, putting in premix bituminous macadam well rammed and sealed with binder 9.8 kg per 10 sqm binded with 0.09 cum of stone chipping, 6.3 mm size and again well rammed (including supply of premix binder and sand) with 8 to 12 tonne power roller depth of pot holes exc. 30mm complete all as specified and directed by Engineer-in charge.
M&L for preparing black top surface by brush with wire brush including Applying tack coat of hot paving bitumen of grade VG-10 of 5 Kg/10 Sqm and including30 mm thick (consoilidated thickness) hot mix semi dense asphaltic concrete base course using 5.5% binder of VG-40 grade having bitumen by weight of total mix including rolling and consolidation to required gradient and chamber, uniform smooth surface with 8 to 12 all as directed.complete all as specified.
M&L for Premix bituminous macadam of paving bitumen of VG-40 grade with 4% binder content by weight of total mix, any penetration laid /rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) complete rolling to uniform smooth surface with 8 to 10 ton power road roller complete all as specified and directed by Engineer-in charge.
Dismantaling Stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc. complete all as specified and directed.
Demolition of concrete in ground floor and paving not exc. 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in charge.
M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) as in sub base complete all as specified and directed by Engineer-in charge.
M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block(rubber moulded) of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.
Demolition of precast concrete articles and other similar works complete all as specified and directed by Engineer-in-Charge.
M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed by Engineer-in-charge.
M&L for New concrete or plaster surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint (of any colour) over a coat of exterior primer, complete all as specified and directed by Engr-in-charge.
S&F in repairs solar cat eye aluminum alloy shall (100% water proofing design according to IP 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed by Engineer-in-charge.
S&F in repairs cat eye both side reflective type of aluminium metal body alloy of size 110mm x 120mm x 20mm with PMMA strip lens reflector of model No. DA 972.0 fixed with specified epoxy adhesive material as per manufactures instructions complete all as specified and directed by Engineer-in-charge.
S&F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engineer-in-charge.
M&L for Manufacturing, supplying and fixing retro reflective Overhead Identification sign/cautionary mandatory and information sign board, area exceeding 1.00 Sqm but not exceeding 1.50 Sqm made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTMD- 4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). post embedded in ground with PCC 1:3:6 type C-2 using 40mm graded stone aggregate of size 45cmX45cmX60cm including necessary excavation and earth work complete all as specified and directed. Note: (i) Shape/ Design of sign board as approved by Engineer-in-Charge. (ii) The letters and symbols etc; on both side shall be as per site requirement and as approved. The size and font of wording as per direction of Engineer-in-Charge.
S&F in repair 800mm dia Convex Mirror the body of convex mirror made out of finest quality ABS/ Polycarbonate material. Convex mirror allow 130 Degree + actual viewing angle, Convex mirror should be installed with help of clamp with pole 2 mtr long and 75mm dia post in post hole of size 60x60x75cm and including embedding in PCC 1:2:4 type B1 including required excavation, horizantal and vertical angle adjustable complete all as per manufacturer's instructions and complete all as specified and directed by Engineer-in-charge.
ABHOG INFRASTRUCTURE PRIVATE LIMITED (BID ID -3140816)
M/S HARIOM CONSTRUCTION COMPANY (BID ID -3141140)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .