REPAIRS TO CERTAIN ROADS AND ROAD

Amount

Removing stone slabs 1.2m in length setts from pavings, stacking for measurement including all extra handling and removal and disposing off rubbish work built in mud mortar, in lenthwise complete all as specified and directed.

M & L PCC 1:4:8 type D-2 (Using 40mm graded agg) in foundation, filling and mass concrete complete all as specified and directed.

S&F Pre-cast cement concrete type C1, 1:3:6 (20mm graded aggregate) solid blocks of strength not lessthan 44kg/sqcm, smooth finish exc, 10cm in width for road kerbs and setting in cement mortar 1:4 complete of size with top edge face chamfered block size 40X15X35 cm or 60x15x35cm / /size varied complete all as speceified and directed.

M&L one coat of plastic emulsion over a coat of primrng paints plaster coat including preparation of new brick, stone, concrete, cement plaster surfaces of any description over 10cm girth or width complete all as specified and directed.

Material and labour for repairs to pot holes, any depth not exceeding 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm in depth and making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) and applying tack coat of bituminous primer @ 5kg/10 sqm with VG-30 and bituminous premix semidense asphaltic concrete 30mm thick consolidated thickness with paving bitumen of grade VG-30 with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 ton capacity vibratory roller and laid with mechanical paver complete all as specified and as directed.

Material and labour for preparing black top surfaces by brushing with wire brush for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.

Material and labour for appplying evenly a priming/ tack coat with bituminous primer @10Kg/10Sqm complete all as specified and as directed.

Material and labour for bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content (using bitumen grade VG-30) by weight of total mix, mixed in hot mix plant using design mix, and laid with mechanical paver and rolled and compacted using 8 to 12 tonne capacity vibratory tandom power road roller to achieve the required compactness to required camber & gradient complete all as specified and as directed.

M&L for providing 2.5mm thick road making strips (retro - reflective) of speficied shade/ colour using hot thermoplastic material by fully automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe, heater driven by skilled operator on road surface including cost of materials, labour, T&P ets and cleaning the road surface of all dirt, scales, oil grease and foreign materials etc strictly in accordance to applicable specifications complete specified and as directed.

S&F out door convex mirror of 100cm (Minimum) dia polycarbonate lenses brim and back holding plates of fiber reinforced plastic including fixing at suitable heights complete specified and as directed.

S&F Cat eyes install of plastic body with acrylic/glass heads reflector and fixed with epoxy and nail/grouting shank of size 100x100x19.8mm of make 3M or equivalent brand complete all as specified.

S S BUILDERS