Providing HT power supply (Balance work) with metering cubical with HT external and internal distribution to AHRS, Kathalagere

Providing HT power supply (Balance work) with metering cubical with HT external and internal distribution to AHRS, Kathalagere

Supply and erection of Double Pole TC structural set including all hardwares suitable for 100 to 300KVA transformers etc complete as per the standard technical specification of BESCOM/MESCOM...

Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 250 kVA, Aluminium Wdg, Star 2 (5 Star)

Suppling erection, testing and commissioning of 11kV Load Break Switch with Metering cubicle and connected accessories, hardwares etc suitable for outdoor type complete as per latest IS standard techn...

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulat...

Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer.

Supplying of on load change over switches 4 poles, 415V, 50Hz, AC Supply with AC-23A Duty. 250Amps

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with therm...

320-400Amps 50kA.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C. a) Group A

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network wi...

HT Cable GROUP A: Supplying and laying of high tension Dry Cure 3 core under ground XLPE (E) cable having stranded comapact circular aluminium conductor, screened insulated, insulation screened with e...

Supplying and making of 11KV (E) Extruded X Linked for tubing & moulded & crosslinked Copmonent using heat shrink stress control tube having high permitivity XLPE Termination -STRAIGHT THROUGH JOINTIN...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 95 Sqmm Long Barrel

120 sqmm Long Barrel

240 sqmm Long Barrel

Supplying of LT UG cable having aluminium conductor PVC insulated,extruded inner sheathed galvanised stell strip (Except 2cx10sq.mm wire armoured) confiriming to IS-3975:1990(No of strip indicated in ...

3.5 core 25 sqmm

3.5 core 50 sqmm

3.5 core 95 sqmm

3.5 core 120 sqmm

Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVC insulated and PVC sheathed steel tape, wire armoured aluminium conductor cabl...

Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/Bends/End-caps of same materials in exisiting trench as per IS 14930 part -II su...

Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In exixting trench/duct. 25 sqmm to 75 sqmm

Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete.

Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm alround the cable.

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip 25x6mm

25x3mm Copper strip 40x6mm

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

Earth work in surface excavation by mechanical means for lowering & levelingthe ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and tec...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Brick work with clay flyash Non Modular brick of class

designation 3.5 in superstructure above plinth level up to floor I level

in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning,straightening,

cutting, bending, hooking, laping/welding joints, tying...

Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

granular aggregates 40mm down size

Providing and fixing Steel work welded in built up sections/ framed

work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and fixing G.I. chain link fabric fencing of required width in

mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Painting Steel work with Deluxe Multi Surface Paint to give an even

shade. Two coat applied @ 0.90L/10 m² over an under coat of primer

applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Supply and erection of …...Mtr RCC Pole including earth work etc,. complete as per the standard technical specification of BESCOM/MESCOM… a) 8Mtr 145Kg WL

b) 9Mtr 145Kg WL

Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification of BESCOM/MESCOM…

5.8.1 H Frame Set

5.8.2 HT ST Support 50x8 mm

5.8.4 Spl 3 PIN Cross ARM

5.8.5 RCC Clamp

5.8.9 GOS Set 400 Amps Double break

5.8.10 Horn Gap Fuse Unit (H.G.)

5.8.11 D.O.L.O cut out

5.8.12 Lightning Arrestor 9KV 5kA polymeric type.

Supply and fixing of …….cross arm including all Hardwares complete as per the standard technical specification.

4 Pin 45x45x5mm -1110mm

2 Pin 45x45x5mm -510mm

Horrizontal. 50x450x6mm -980mm

Supplying and Fixing …..including all Hardwares etc complete as per the standard technical specification.

5.9.3 11 KV Pin Insulaor

5.9.6 No.15 Strain Insulator

5.9.4 Disc Insulator 70/90 KN

Supplying and Fixing of P.G.Clamp including all Hardware's etc. complete as per the standard technical specification of BESCOM.

Supplying and Fixing of Rabbit Conductor(6/3.15mm Al +6/3.15mm Steel)

Relesing and Reconducting of Rabbit ACSR

Relesing and Erection of 3 ph 11 kv /433 v Distribution transformer center using 9 mtrs DPT'S25 KVA

Transportaion of 25 KVA

Transportaion 63 KVA/100 KVA

Relising & reusing Disc Insulator

Relising & reusing 3 pin cross arm

Relising fo RCC Poles

Electrical inspection Charges