SPECIAL REPAIR TO GROUND CREW TOILET BLOCKS IN BLDG NO P-04 AND P-05 OF ARMY AVN SQN (R and O)

Demolition of cement concrete (un-reinforced) including terrazzo flooring in ground floor and paving not exceeding 15 cm thickness (below or above ground level) , complete all as specified and directed.

Material and Labour for 75 mm thick cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 75 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in plinth protection and path laid in panels not more than 3.0 mtr in length, laid to slope 1:30 including forming joints 10 mm wide and duly filled with mixer of mastic bitumen and sand (01 part bitumen mixed with 03 parts of sand) , complete all as specified and as directed. (Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Material and Labour for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles, over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.

Material and Labour for glazed ceramic coloured tiles in vertical surface of size 350 X 250 x 7/ 450x300x7 mm thick, joint less type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar as in floors, aprons, etc. complete all as specified and directed.

Material and Labour for 18-20 mm thick granite slab of any type , tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like and over 10mm thick backing coat rough finish/ screed bed in cement mortar (1:4), including pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed.

Material and Labour for 18/19 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations, kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including dismantling of old boarding, cupboard any description, fixed in any position including fittings, complete all as specified and directed. (Note: Supply for stainless steel piano hinges/soft close clip on concealed hinges shall be measured and paid separately)

Supply and fix continuous (piano) hinges, mild steel bright finish or electro galvanized , width of flaps (when open) 30 mm, complete all as specified and directed.