providing 90mm HDPE Pipe line works and Erection of submersible motor in HCMC

Amount

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % Duty lpm x m (75x 275) 10 Hp

Supply of 100 Amps Porcelain fuse unit (500 V)of best quality make including cost of handling charges and all other incidental charges.

Supply of 100 A TPN switch disconnnector fuse units in sheet steel enclosure with HRC fuses Double break with ISI make including cost of handling charges and all other incidental charges.

Supply of 63 Amps 30MA RCCB/ELCB (Four Pole) switch with ISI make including cost of handling charges and all other incidental charges.

Supply of 10 sqmm Pvc Insulated Single Core Multi Strand Fire Reterdant Flexible Copper Cable. with ISI Mark Conforming to IS 6 Sqmm Copper wire of best quality make including cost of handling charges and all other incidental charges.

Supply of 3 core 6 sqmm Jointing of XLPE Insulated and Sheated 3 Core Flat Type Copper Cable Conforming to IS 694/1990 and as amended Thereafter with ISI make including cost of handling charges and all other incidental charges.

Supply of 4 core 16sqmm JOINTING OF L.T. CABLES- 3,3.5,4 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CABLE CONFORMING TO IS 1554 PART I AND AS AMENDED THEREAFTER WITH ISI MARKING with ISI make including cost of handling charges and all other incidental charges.

Supply of 65mm UPVC Column pipe Supreme Heavy with ISI make including cost of handling charges and all other incidental charges.

Supply of 2" GI Bend with ISI make including cost of handling charges and all other incidental charges.

Supply of 2" X 36" pipe nipple with ISI make including cost of handling charges and all other incidental charges.

Supply of 2" GI Flange Set with ISI make including cost of handling charges and all other incidental charges.

Supply of 2"GM Non return valve with ISI make including cost of handling charges and all other incidental charges.

Supply of 2"G I Ordinary Coller with ISI make including cost of handling charges and all other incidental charges.

Earth work excavating and depositing on bank with an initial of 10m and initial lift of 2m including bailing out water with kifts indicated below including guarding and lighting in trenches for laying of pipes in hard stiff clay stiff black cotton, hard red earth shales, muram gravel, stony earth, and earth mixed with small boulders and hard gravel soil(ordinary soil) etc., SS-20B all complete as per standard specification and as directed by the Department Officers.(sor p.no.296)

Supplying and Delivery of the following sizes of HDPE Pipes PE-100 - conforming to IS-4984/1995, as specified to technical specifications in standard length including labour charges for loading, un-loading and staging at stock yard etc.., complete as per standard specification as directed by the Department Officers (a) 90mm HDPE Pipe.

Supply and Delivery of HDPE and PVC specials of conforming to IS Specification at site of work including all taxes loading transportation unloading insurance etc.., Complete and as directed by department officers (a)90 mm Sluice valve

90 mm HDPE Bend

90mm Stupbend

90mm Flange set

90mm HDPE Equal Tee

Lowering the following HDPE pipes and specials into trench and laying to proper grade and alignment complete as per standard specification by deparment officers etc.., (a) 90mm HDPE Pipe

Jointing the HDPE pipes and specials and testing the required pressure with water etc.., Complete as per standard specification (a) 90mm HDPE Pipe

Testing of pipes for water supply with hudralic testing equipments by filling with water including cost of water @ 60/KL and testing to recommended Pressure in convenient stretches and attending the brusts if any occurred during the test excluding the cost of pipes but including other incidential and operational charges ETC... complete for the following diameteres of pipes (a) 90mm HDPE Pipe

R V CONSTRUCTIONS AND INFRA DEVELOPERS (BID ID -1188699)