Constructing HDPE Pipe line for drain off the rain water from water logeed area and installation of 2 Tubewell in Village Reendka and village Ghelab in distt. Palwal

Amount

Mobilisation & Demobilisation of Equipment & Concerned Personnel at Site and Within site for atleast 01 Locations of setup as advised by Engineer-in-Charge.

Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I) , including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer-in-Charge, upto 90 metre depth below ground level : 200 mm dia wells for pump out.

Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-Charge, upto 90 metre depth below ground level : 100 mm dia for observatory wells.

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS : 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & ccessories all complete, for all depths, as per direction of Engineer-in-charge 200 mm nominal size dia having minimum wall thickness 5.40 mm.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS : 12818, including required hire and labour charges, fittings & accessories etc, all complete, for all depths, as per direction of Engineer-in-charge : 150 mm nominal size dia.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS : 12818, including required hire and labour charges, fittings & accessories etc, all complete, for all depths,as direction of Engineer-in-charge, 100 mm nominal size dia for observatory wells

Gravel packing in tube well in accordance with IS: 4097, including providing gravel fine/medium/ coarse, in required grading & sizes as per direction of Engineer-in-charge

Developement of tube well in accordance with IS:2800 (part 1) and IS : 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor,running the compressor for required time till well is fullydeveloped, measuring yield of well by "V"notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approval laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc, all as per requirement and direction of Engineer-in-charge.

Providing and fixing M.S. Clamp of required dia to the top of casing/housing pipe of tubewell as per IS : 2800 (part I), including necessary bolts & nuts of required size complete : 150 mm clamp.

Providing and fixing M.S. Clamp of required dia to the top of casing/housing pipe of tubewell as per IS : 2800 (part I), including necessary bolts & nuts of required size complete : 200 mm clamp.

Providing and fixing Bail plug/Bottom plug of required diato the bottom of pipe assembly of tubewell as per IS : 2800 (part I) 150mm dia.

Providing and fixing Bail plug/Bottom plug of required diato the bottom of pipe assembly of tubewell as per IS : 2800 (part I) 200mm dia.

Providing, Installation & Testing of Submersible Pump with all required fittings (Bend & Nipple, Nut - Bolt, Rubber Packing, Supporting Clamp etc.) of 10HP capacity, 4 stage, total head -39mtr, Discharge of 70000LPH at 16mtr head, all complete as desired by Engineer-in-charge.

Providing & fixing Submersible cable-1 x 3 x 4mm with submersible pump.

Control Panel with ammeter voltmeter M.C.B single phase preventer, indicator starter BCH make, 30HP, Star Delta.

Providing and Fixing G.I pipes complete with G.I. Fittings including trenching and refilling etc : 80mm

Making connection of G.I. Distribution branch with G.I. Main of following sizes by providing and fixing tee, including cutting and threading the pipe etc, complete : 50 to 80 mm nominal bore.

Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) :80 mm dia Nominal bore.

Providing and Fixing G.I Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 80 mm dia nominal bore.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting ,fixing in position and applying a primer all complete.

C.C 1:4:8 for holding of claimps and panal bord

Earth work in excavation of foundation of structures as per drawing and technical specifications, including setting Out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per clause 304 of MoRT&H specifications, in Ordinary soil, by Mechanical means

Providing and laying in position ready mixed plain cement concrete M-15 grade with (cement content considered @ 240 kg/cum) cement concrete as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade grade for plain cement concrete work, including pumping of RMC from transit mixer to site of laying and curing, exluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS: 9103 to accelerate/ret setti of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge

Brick masonry work in 1:3 in sub-structure including scaffolding complete excluding pointing and plastering, as per drawing and MoRT&H Specifications 1300 and 2200

12 mm cement plaster of mix 1 :3 (1 cement: 3 fine sand)

Cement rendering on plaster 1 mm thick

Providing HDPE PIPE( PE grade 80 and PH-4 ) 200mm dia including, supplying , lowering, laying, aligning, fixing in position and jointing at all level/ depths ISi marked HDPE pipes induding cost of HDPE 'Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer.

The Tewatia Co-op. L&C Society Ltd.