Periodical renewal under PMGSY Finacial incentive 2019-20 (Part-II) during the year 2020-21on Bagbania Salehran road km 0/0 to 4/670

Amount

Providing ,Laying,Spreading and Compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug mill) carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80-100 kN weight to achieve the desired density including lighting barricading and maintenance of diversion etc as per tabl 400.11 & 400.12 and techanical specification clause 406. including carriage of material through all modes of trasportation within all leads and lifts and other incidentials

Providing and applying priming coat with bitumen emulsion (SS-1) on prepared surface or granular base including cleaning of road surface and spraying primer @ 0.70-1.00 kg/m2 using mechanical means as per technical specification clause 502.ncluding carriage of material through all modes of trasportation within all leads and lifts and other incidentials

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared and hungry bituminous cleaned with Hydraulic broom as per Technical Specification Clause 503.including carriage of material through all modes of trasportation within all leads and lifts and other incidentials.

Providing, laying Bituminous Concrete with 100-120 TPH batch type hot mix plant providing of 75 tonne per hours using crushed aggregate of specified grading premixed with bituminous binder @ 5.4 to 5.6 percent of mixer and fillers, transporting the hot mix to work site laying with hydrostatic paver finisher with cencer control to the required grade , level and alignment, rolling with smooth wheeler, vibrating and fonder roller to achieve the desired compection as per MORTH specification clause-509 complete in all respect ( 30 mm. thick) including within all leads and lifts and other incidentials.

Providing laying hot applied thermoplastic road marking paint using hydro carbon resin, glass beads and pigments in white/yellow colour for road marking on flexible and rigid pavement on specified length, breadth and minimum thickness of 2.5 mm including cleaning the surface of dirt, dust and other foreign matters, demarcation at site etc. complete including cleaningand preparation of road surface, line marking in white and yellow colour as per the directions of Engineer In Charge.

Construction of unlined surface drains of average cross-sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307.(Machenical means)

Hardeep Singh Bedi