SPECIAL REPAIRS TO LIVING-IN-BILLET (P-355, 437 AND 438) AT AFS HAKIMPET

Amount

B/R PORTION : Taking down Chowkhats or frames with shutters n exc 1.5 sqm each complete all as specified and as directed.

Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat (for Single rebate) of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat (for double rebate) of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed. Note: Stainless steel butt hinges and necessary S S screws shall be paid separately.

S&F Factory made single extruded WPC (Wood Polymer Composite) skeleton or glazed door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed. Note: Stainless steel butt hinges, wiremesh or glass and necessary S S screws shall be paid separately.

S&F 100 mm long SS Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for WPC door frame along with strong adhesives to Brass screws for fixing complete all as specified and as directed.

S&F Factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories is included and packing the gaps with silicon sealent complete all as specified and as directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose. (A) Area not exceeding 2.00 sqm each.

S & F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having w multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality all complete as per approved drawing complete all as specified and as directed. (Glass shall be paid separately).

M & L MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

S&F 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed.

S&F 200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed.

S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

Supply only Wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of 'stainless steel wire staples for skeleton shutters etc complete all as specified and as directed.

S&F 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty exc 0.5sqm in each pane complete all as specified and as directed.

S&F in repairs 25 mm dia Stainless steel curtain rods with fixing brackets, End caps, stops, rollers etc.and taking down old pipe complete all as specified and as directed.

S&F 18/19mm Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed.

M&L 1mm thick Laminate sheet (sunmyca sheet) glossy finish any colour paste with favicol on plywood/ Block board for cabinet and cupbord, commercial type on one sides complete all as specified and as directed.

S&F Stainless steel Handle 100mm dia complete all as specified and as directed.

S&F Clip on soft hinges full overlay complete all as specified and as directed. Make : Godrej

Extra over rates of 18/19mm thick particle board for external teak wood lipping, 6 mm thick,fixed with nails complete all as specified and as directed.

Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed.

Dismantling of existing PVC 1000-2000 ltrs water tank complete all as specified and as directed.

S&F 2000Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position complete all as specified and as directed.

S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) complete all as specified and as directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe all complete all as specified and as directed.

Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store complete all as specified and as directed.

All same as per item No.30 here in before but 20 mm bore complete all as specified and as directed.

All same as per item No.30 here in before but 25 mm bore complete all as specified and as directed.

S&F 16mm CPVC pipe outer dia with SDR 13.5 pipes & plain CPVC SDR 11 fittings fittings in trenches, floors, walls etc complete all as specified and as directed.

All as per item No.33 above but 20mm bore complete all as specified and as directed.

M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and as directed.

S&F steel water tubing 25 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F Counter top wash hand basin oval shaped 550x430x195mm in repairs complete all as specified and as directed. Make: Parryware or equivalent

S&F in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs complete all as specified and as directed. Make: Prayag/Parryware or equivalent.

S&F in repairs 32mm Dia PVC waste pipe for sinks/urinals/ wash basins complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps of Swan neck type CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed. Make: Prayag or quivalent in other make.

S&F in repairs 32mm CP Bottle traps for washbasin/urinal outlet Make: Prayag or equivalent in other make complete all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and Seat cover for pedestal pan with complete all as specified and as directed.

S&F vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests including removing the existing one complete and making good all connections as in repairs complete all as specified and as directed.

S&F in repairs for Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and as directed.

Supply and fix 15 mm bore PVC connection pipe 45cm long with brass nuts and washers on both ends all as in repairs complete all as specified and as directed.

S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long with brass nuts and washers complete all as specified and as directed.

S&F in repairs brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and as directed. Make : Prayag/Parryware or equivalent

S&F in repairs brass chromium plated health faucet 15mm dia reinforced pipe fitted to pipe complete all as specified and as directed. Make : Prayag/Parryware or equivalent

S&F in repairs brass CP wall mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed as complete all as specified and as directed. Make: Prayag or quivalent in other make.

S&F in repairs brass CP shower rose with arms 75 mm size fixed complete all as specified and as directed.

S&F 15mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair. Make: Prayag/Parryware or equivalent.

S&F concealled stop valves 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed.

S&F in repairs Acrylic Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and as directed.

S&F in repairs CP Towel ring complete all as specified and as directed.

S&F Towel Rail 600mm long 20mm dia, D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in complete all as specified and as directed.

S&F Soap dish any type fixed to plugs with chromium plated complete all as specified and directed

S&F in repairs Stainless Steel Pegset of 4 No Pegs fixed withand including CP brass screws and wooden/Plastic cleats and fixed complete all as specified and directed.

S&F SS Grating round 140 mm dia (Minimum weight 50gms) and fixed in repairs complete all as specified and as directed.

S&F SS Grating doom 125 mm dia with waste hole (Minimum weight 40gms) and fixed in repairs complete all as specified and as directed.

Demolition/Dismantling of drain pipes any type at any position complete all as specified and as directed.

S&F PVC (SWR) floor trap of 75mm, plain with Grating doom 125 mm dia with or without waste hole (as necessity) of PTMT (Minimum weight 40gms) including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed.

S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

M&L Plain Cement concrete type C-2, 1:3:6(40mm graded aggregate) 75mm thick Laid in plinth protection including Grade B joint filling complete all as specified and as directed.

M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. complete all as specified and as directed.

Material and labour for Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and no pigment set jointed and pointed in neat cement slurry colour to match including Screed bed of mortar 15 mm thick for laying floor finishes with cement motor 1:4 complete all as specified and as directed.

M&L sand filing under floors including watering and consolidation complete all as specified and as directed.

M&L Rubberised machine pressed precast concrete coloured interlocking paver block any shape and size fixed with gray cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or complete all as specified and as directed.

Demolition of cement concrete (Reinforced) of any description and in any position complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L 25 mm thick PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate as in floors complete all as specified and as directed.

M&L Non skid ceramic tiles (Rectified/square tiles) of 7 to 10 mm thick (square/ rectangular) area of each the exceeding 0.18 sqm but not exceeding 0.38 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and as directed.

M&L Non skid ceramic tiles (Rectified tiles) of 7 to 10 mm thick (square/ rectangular) area of each the exceeding 0.18 sqm but not exceeding 0.38 sqm,of approved 1st quality in skirting/dado etc with screed bed or bedding layer 10mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and as directed.

M&L for rendering to Stone masonry surfaces or fair faces of concrete surfaces, 10mm thick in cement mortar 1:4, scoured for fixing tiles /stone slabs in skirting/ dados etc to complete all as specified and as directed.

M&L Glazed Ceramic tiles coloured, of size 450mmX350mm/300mmX7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles complete all as specified and as directed. Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and as directed.

M&L 18-20 mm thick Sadarahalli Stones slab (of any type), in floors, steps,Skirting and risers etc any colour, Polished bedded over cement screed bed 10mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces complete all as specified and as directed.

Material and labour 40mm average thick PCC nominal mix 1:2:4 type B0 (12.50mm graded stone aggregate) for roof treatment etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 2% by weight of cement (but excluding the cost of cement), finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M & L for preparation of concrete surfaces free from loose materials, fungus & applying two coat of liquid polyurethane membrane of smart care damp block 2K a two component acrylic polymer modified cementious high performance coating to be applied by roller/brush and timing for applying the coat is to be between 4 to 6 hrs (1st & 2nd coat) complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and as directed.

M&L Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed.

M&L Reinforced concrete pipes, class NP3 150mm bore, laid and jointed complete with collars etc complete all as specified and as directed.

Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as directed.

M&L Rendering 10 mm thick in CM 1:3 on celling surface, finished even and smooth with out using extra cement up to ht 6.5 m complete all as specified and as directed.

M&L 3 coats of white wash over a coat of primer on newly plastered surfaces on ceilings complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr complete all as specified and as directed.

M&L Rendering 15 mm thick in CM 1:6 on brick massonry surfaces of walls, finished even and smooth with out using extra complete all as specified and as directed.

M&L preparation of newly plastered surfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer and chalk whiting with using of all fixtures which are necessary for execution of work and leaving premise,clean and tidy complete all as specified and as directed.

M&L Complete removal of existing treatment on walls complete all as specified and as directed.

M&L for two coats of Oil bound distempering over a coat of primer over 3mm thick wall putty with white or tinted on walls complete all as specified and as directed.

M & L for Preparing of old/new plastered surfaces of stone/brick and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L Complete removal of existing treatment on ceilings complete all as specified and as directed.

M&L 3 coats of white wash over a coat of primer on old plastered surfaces on ceilings complete all as specified and as directed.

M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint with using of all fixtures which are necessary for execution of work and leaving premise,clean and tidy complete all as specified and as directed.

M&L preparation of previously treated wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint with using of all fixtures which are necessary for execution of work and leaving premise,clean and tidy complete all as specified and as directed.

M&L for Preparing new steel and iron surfaces of any description over 10 cm widthor girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Dismantling of wrought iron work or mild steel of any description not otherwise provided for complete all as specified and as directed.

M & L for providing and fixing stainless steel (Grade 304) railing made of hollow/square tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includin fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

E/M PORTION (INTERNAL ELECTRIFICATION) : Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and as directed.

M&L for point wiring with 1.5 sq.mm FRLSH insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable as per proper colour coding conforming to relevant IS drawn through existing concealed PVC conduit including FRLSH, PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour coding and modular boxes of 16 Gauge (i.e. 1.6mm thickness), etc including all accesories if required making good the disturbed surfaces of walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified and as directed. Insulation resistance test: All wiring shall be tested with 500V Meggar between phases, phase – neutral and to Earth. IR value shall not be less than 1M-ohm.

One light point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

All as per item No. 112 here-in-before but with 2.5 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable in accordance with relevant IS with proper colour coding, 1100 volts grade drawn in ISI marked MMS grade PVC conduit of dia 20mm minimum/ casing capping , 1.2 mm thick minimum, 20mm width minimum with double locking arrangement, surface type terminated in sunken type GI sheet metal flush boxes of 16 Gauge (i.e. 1.6mm thickness) including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and as directed for following:- NOTE FOR ITEM NO. 4,5,6 :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. (ii) The decision of casing capping/PVC conduit rests with the Engineer-in-charge.For casing capping, screws of minimum 35x8mm and suitable plugs should be used for fixing. In case of stone walls, wooden gutties shall be grouted in wall for fixing of screws. Distance between 2 screws shall not be more than 600mm. Size of Trunking shall be correct depending on number of wires to be drawn as per SSR Part1 but not less than 20mm. (iii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iv) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule. (v) Insulation resistance test: All wiring shall be tested with 500V Meggar between phases, phase – neutral and to Earth. IR value shall not be less than 1M-ohm.

One light point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

All as per item No. 114 here-in-before but with 2.5 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board complete all as specified and as directed.

All as per item No. 114 here-in-before but with 4 sq mm size FR-LSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3pin socket outlet or earth plug sockets for ACs and geysers complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable with proper colour coding conforming to relevant IS, 1100 volts grade drawn in ISI marked MMS non-metallic PVC conduit of size not less than 20mm dia conforming to IS 9537:latest, concealed type terminated in sunken type GI sheet metal flush boxes of 16 Gauge including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and as directed for following:- NOTE FOR ITEM NO. 7,8,9 :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the conduits and boxes to required depth & core cutting wherever required and making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule. (iv) Insulation resistance test: All wiring shall be tested with 500V Meggar between phases, phase – neutral and to Earth. IR value shall not be less than 1M-ohm.

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

All as per item No. 117 here-in-before but with 4 sq mm size FRLSH pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for earth plug socket complete all as specified and as directed.

All as per item No. 117 here-in-before but with 2.5 sq mm size FRLSH pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board complete all as specified and as directed.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and as directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular fan regulator 100 W 2 module, socket type and capacitive type complete all as specified and as directed.

S&F 16 Amp 30mA PRCD Adaptor (White) - Plastic Body, Auto-Trip, with safety shutter adhering to IEC 61540, IP40, built in test and reset buttons complete all as specified and as directed.

S & F 4ft 20W LED batten tubelight surface/wall mounted with powder coated Aluminium housing, high optically efficient polycarbonate diffuser, inbuilt electronic driver duly wired upto terminal block, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 complete all as specified and as directed. Model: Crompton Linea Pro or similar

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified and as directed.

S&F Reading lights with 3W, 240V AC, 4000K flexible reading lights complete all as specified and as directed. Make : Philips Model No 30975 or equivalent.

Taking down distribution boards / main switches of any type, size and capacity complete all as specified and as directed.

Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and as directed.

Supply and fix distribution board double door type VTPN 6 way sheet steel powder painted with bus bar ,with RCBO incomer neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and as directed.

S & F sheet metal enclosure powder painted for MCB DB SPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and as directed.

Supply and fixing RCBO Four pole, 30mA, 40 Amps in `C’ series having current rating 10 KA complete all as specified and as directed.

Supply and fixing RCBO Four pole, 30mA, 20 Amps in `C’ series having current rating 10 KA complete all as specified and as directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and as directed.

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces complete all as specified and as directed.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 4 Sqmm drawn through PVC conduit/casing capping including accessories with 4 sqmm PVC insulated earth wire all as directed. Note: 2 runs of 4 sqmm copper cable and one run of 4 sqmm copper earth wire and conduit/Casing & Caping will be measured as one length. The wiring shall be concealed/on surface is under the discretion of Engineer-in-charge. The rate quoted shall include cost of cutting chases and core cutting wherever required complete all as specified and as directed.

M/L for Sub main wiring with 4 runs of PVC insulated unsheathed multi stranded single core copper conducter 10 Sqmm drawn through PVC conduit/casing capping including accessories with 10 sqmm PVC insulated earth wire all concealed complete all as specified and as directed. Note: 4 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.The rate quoted shall include cost of cutting chases and core cutting wherever required.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified and as directed. Note: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket of medium grade GI pipe 32mm dia with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and as directed.

Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories without remote, 230 V, 1200mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated as per latest BEE norms in vogue at the time of supply with brushless direct current motor (BLDC) including fixing of anchor bolt /fastening arrangement for fan hook complete all as specified and as directed (as per latest authorization).

Disconnecting and removing ceiling fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly, lubricating with approved lubricants, reassembling, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed.

Disconnecting and removing exhaust fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of exhaust fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed.

S & F in replacement of louvers with suitable frame work and fixing arrangements for exhaust fan of any size sweep complete including removing the existing unserviceable one complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep heavy duty with, blades, and frame and louvers including taking down the existing U/S exhaust fan and depositing to MES E/M store complete all as specified and as directed.

Taking Down water heater (Electric Geyser) storage type of any make of 25 / 50 ltr capacity after disconnecting the existing electrical connection, water pipes and deposit to E/M store yard and and refixing in the original place/position duly connecting up water supply and electric supply etc.complete after cleaning externally complete all as specified and as directed.

Supply and laying Non-metallic PVC conduit MMS grade conforming to IS 9537:latest, FRLS, dia 20mm including all accessories and hardware complete all as specified and as directed. Note: Cost of cutting chases shall be measured and paid separately under relevant item of this schedule.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supply and laying FRP powder coated cable tray with cover, perforated type, 100mm, sheet thickness minimum 4mm including coupler plates, elbows, tees, reducers, bolts, nuts, washers and other accessories conforming to NEMA/ASTM/BIS standards complete all as specified and as directed.

Supply 12" gold life smart down rod (Anti suicide fan rod) MS pipe zinc plated, 19mm OD, 1.8+/- 0.05mm thick, spring set grade 3 carbon steel material zinc plated, MSME tested for performance test and opening at impact load of 22 kgf + and spring hidden in pipe will expand to about 1 mtr or more, powder coated white colour for ceiling fans of any size with all accessories complete all as specified and as directed.

EXTERNAL WATER SUPPLY :- Supply and Lay in replacement for Galvanized Iron water tubing " Medium Grade" in accordance with IS 1239:latest with all fittings laid in trenches for following sizes complete all as specified and as directed.

80mm dia pipe

50 mm dia pipe

40 mm dia pipe

Excavation in trenches not exc 1.5 wide and not exc 1.5 mtr deep and getting out in hard /dense soil for laying pipes complete all as specified and as directed.

Returning and filling in soils , including spreading ,levelling ,watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removal of excavated material to a distance not exc 50 mtr away from starting point and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

M & L Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 40 mm dia complete all as specified and as directed.

Cutting of DI/CI/GI mains 80mm in position for insertion of new tees, tail pieces , sluice valve etc for following sizes complete all as specified and as directed.

Boring of holes under road, pavement, hardstanding by trenchless technology using ultrasounding technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed.

EXTERNAL ELECTRIC SUPPLY :- Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 25 sqmm 4 core ISI marked complete all as specified and as directed.

Supply and fill riddled soil obtain from excavated soil upto depth of 30cm (8cm below cable and remaining above cable) for cushioning of cable complete in respect complete all as specified and as directed. Note :Excavated soil shall be riddled by using sieve to seperate composite particles etc as per IS 1255:1983 and refilling in trenches as in cable cushioning.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and as directed.

Supply and lay GI pipe light grade 40mm dia laid in trenches/concealed in wall for cable protection complete all as specified and as directed.

Saiansh Associates (BID ID -3499636)

bholanath bera (BID ID -3505784)

saradhi construction combines (BID ID -3499873)

Dwarka Pershad Radhey Ramanlal (BID ID -3494404)