GE U(N) 60 2022 23 SPECIAL REPAIR TO BLDG NO P 38 INCLUDING PROVISION OF EARTHING AT OTHER KEY LOCATIONS ALONG WITH CERTAIN MINOR REVENUE WORKS AT DIFFERENT LOCATIONS UNDER GE (N) UDHAMPUR

Amount

M&L for taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and as directed by Engr-in-Charge.

M&L for 10mm thick rendering on fair faces of brick concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cementcomplete all as specified and as directed by Engr-in-Charge.

M&L for 15 mm thick rendering on fair faces of brick concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compoundcomplete all as specified and as directed by Engr-in-Charge.

M&L for 10mm thick rendering on fair faces of brick concrete surfaces as in chajja/facia in cement mortar 1:3 and finished even and smooth mixed without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 5mm thick in cm 1:3 on ceiling finished even & smooth W/O using extra cementcomplete all as specified and as directed by Engr-in-Charge.

Supply only integral water proofing compound @0.200Ltr per 50kg of cement or as per manufacture inst as complete all as specified and as directed. .

M&L for taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm eachcomplete all as specified and as directed by Engr-in-Charge.

All as per item 07 above but exceeding 1.5 Sqm and not exc 4 Sqm each.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primercomplete all as specified and as directed by Engr-in-Charge.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm,complete all as specified and as directed by Engr-in-Charge.

M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treatedcomplete all as specified and as directed by Engr-in-Charge.

All as per item no 11 above but glazed and skeleton shutter with sash bar for glass / wire gauge.

M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast coping complete all as specified and as directed by Engr-in-Charge..

M&L for plain cement concrete1:4:8 type D2 (Using 40mm graded stone aggregate) as in foundation conconrete mass filling complete all as per specified.

M&L for steel windows or ventilators,fixed type,with glazing bars,including a shop coat red oxide of zinc chrome primer,complete all as specified and as directed by Engr-in-Charge.

Supply and fixing factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs,complete all as specified and as directed by Engr-in-Charge. & shown in drawings.

Supply and fixing factory made steel windows (Box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs,complete all as specified and as directed by Engr-in-Charge. & shown in drawings.

M&L for framed work such as grills, gratings doors gates cup boards etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks including guccet plates and similar work conforming to Fe 410-0 or FE 310-0

S&F for 1.60mm thick MS plain sheet as in steel dors with ncessary welding etc.complete all as per specified.

M&L for providing and fixing 30mm thick factory made PVC door shutter consisting of panel of Hollow PVC Profile of 24mm thickness, consisting of frame made out of M.S tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick Prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and as directed by Engr-in-Charge.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each panecomplete all as specified and as directed by Engr-in-Charge..

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primercomplete all as specified and as directed by Engr-in-Charge..

M&L for preparation of old wooden painted surfaces as exc 10cm width or girth and applying one coat of synthetic enamel paint

M&L for preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engr-in-Charge..

S&F 100mm long butt hings medium weight cold rolled steel with Brass screws complete all as specified and as directed by Engr-in-Charge.

S&F 75mm long butt hings medium weight cold rolled mild steel with Brass screws complete all as specified and as directed by Engr-in-Charge.

S&F aluminum anodised bolts barrels tower bolts with bright both 150mm long complete all as specified and as directed by Engr-in-Charge.

S&F anodised aluminium handle 150 mm size complete all as specified and as directed by Engr-in-Charge.

S&F anodised aluminium handle 100 mm size complete all as specified and as directed by Engr-in-Charge.

S&F300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete, complete all as specified and as directed by Engr-in-Charge. (ISI Mark)

S&F galvanized mild steel wire cloth 0.56mm normal dia of wire and average width of apparatus 1.18mm and fixed width tinned lacks of galvanized wire staple complete all as specified and as directed by Engr-in-Charge.

S&F 300mm ordinary rat tail rod pattern spring incl roller and roller plate (mild steel) complete all as specified and as directed by Engr-in-Charge.

S&F fixed in repair viterous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) with 'P' or 'S' trap complete all as specified and as directed by Engr-in-Charge.

S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene ball valve,float and handleof low or high density and 15mm PVC connection 450mm long complete all as specified and as directed by Engr-in-Charge.

S&F Viterous china wash basin pedestral type white flat back size 550 x 400mm incl waste couping CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP getting with holescomplete all as specified and as directed by Engr-in-Charge. and directed by Engr-in-Chare.

S&F PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified and as directed by Engr-in-Charge. & directed

S&F PVC flexible connections 600mm long 15mm dia with brass flange nuts & washerscomplete all as specified and as directed by Engr-in-Charge. & directed

M&L for demolition of cement concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and as directed by Engr-in-Charge.

M&L for dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by Engr-in-Charge.

M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cementcomplete all as specified and as directed by Engr-in-Charge..

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and smooth with using extra cement complete all as specified and as directed by Engr-in-Charge..

M&L for providing cement concrete type B0 1:2:4 (12.5mm graded aggregates) louvers & jallies 25mm thick (meaured solid) including all moulding all as specified & directed by Engr-In-charge.

M&L for machine cut kota stone slab flooring 20-25 mm thk over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including laying over 20mm thick Screed in cement mortar 1:4complete all as specified and as directed by Engr-in-Charge.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar jointed with ditto as per item above & including 15mm thick rendering in cement mortar 1:4complete all as specified and as directed by Engr-in-Charge.

M&L for green marble 18- 20mm thick machine cut as in shelves, cupboard, etc bedded , jointed and pointed with grey cement slurry including cutting and polishing including bedding layaers of CM 1:4 (20mm thick) complete all as specified and as directed by Engr-in-Charge.

S&F glazed ceramic tiles (coloured) on vertical surfaces 450x300x6 to 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick screed (1:4) all as specified & directed by Engr-In-Charge.

M&L for non skid coloured glazed ceramic tiles area of each tile exc. .11 sqm but n.exc. 18 sqm 7mm to 8mm mm thick as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed of cement mortar(1:4)complete all as specified and as directed by Engr-in-Charge.

M&L for non skid coloured glazed ceramic tiles area of each tile exc. 0.06 sqm but n.exc. 0.11 sqm 7mm to 8mm mm thick as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed of cement mortar(1:4) complete all as specified and as directed by Engr-in-Charge.

M&L for two coat of cement base paint over a coat of alkali resistant primer paint including preparation of newly plastered surfaces of wall upto 7m height from ground level and at all locations as directed including scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge.

M&L for preparation old decorated surfaces of walls including all cornices, pillasters etc by removing the existing decorative treatment completely including washing, rubbing down and stopping the distempered and painted surfaces and applying two coat of cement base paint over one coat of wall care putty complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces of walls, conices etc by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash complete all as specified and as directed by Engr-in-Charge.

All as per srl item No. 52 here in before but on ceiling surfaces.

M&L for preparation of new decorated plastered or unplastered surfaces of walls and applying three coat of white wash complete all as specified and as directed by Engr-in-Charge.

All as per srl item No. 54 here in before but on ceiling surfaces.

M&L for preparation of new plastered surfaces of wall by applying 1 to 1.2mm thick Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsioncomplete all as specified and as directed by Engr-in-Charge.

M&L for preparing of old surfaces as on wall incl complete removed of existing treatment and applying two coat of oil emulsion distemper over a coat of birla wall care putty all as directed by GE/Engr-in-charge.

M&L for reinforced cement concrete type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in shelves, slabs and in similar works all as specified & directed by Engr-in-charge.

M&L for reinforced cement concrete type B1, 1:2:4 (using 20 mm graded crushed stone aggregates) as in Lintil/ beam all as specified & directed by Engr-in-charge.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed by Engr-in-Charge.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed by Engr-in-Charge.

M&L for formwork to Sides of pillar/ column/ beams square or rectanglar all as specified & directed by Engr-In-Charge.

M&L for demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.

M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.

M&L for mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.

S&F pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed of iron pipe of bore 15mmcomplete all as specified and as directed by Engr-in-Charge..

M&L for dismantling cast iron work of any description etccomplete all as specified and as directed by Engr-in-Charge. and directed by Engineer-in-Charge.

S&F cast iron soil, waste and vent pipes,100mm dia in any length with or without ears with cement joints, laid in trenches or in floors/walls complete all as specified and as directed by Engr-in-Charge.

S&F cast iron soil, waste and vent pipes,75mm dia in any length with or without ears with cement joints, laid in trenches or in floors/walls complete all as specified and as directed by Engr-in-Charge.

S&F cast iron oval access door fixed to 100mm bore pipe complete all as specified and as directed by Engr-in-Charge.

S&F cast iron oval access door fixed to 75mm bore pipe complete all as specified and as directed by Engr-in-Charge.

S&F cast iron floor trap with grating to 75mm bore including jointing to waste pipe fixed in cement concrete 1::2:4 type B-1complete all as specified and as directed by Engr-in-Charge.

S&F CI branch pices single (equal or unequal) ordinary or inverted (Spigot or socket type) or with parallel branches for bore of pipe 100mm complete all as specified and as directed by Engr-in-Charge.

All as per srl item No 73 but for bore of pipe 75mm

S&F stack clamp out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and screwing ends of stay to wall or roof of 110mm bore pipe complete all as specified and as directed by Engr-in-Charge.

S&F CI bends (any radius) 100mm bore diminishing pieces or taperscomplete all as specified and as directed by Engr-in-Charge.

All as per srl items No 76 but 75mm bore pipe

M&L for demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, complete all as specified and as directed by Engr-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius but in cm 1.4 complete all as specified and as directed by Engr-in-Charge.

M&L for half brick work with sub class “B” bricks, straight or curved on plan exc 6 m mean radius butt in cm 1:4 complete all as specified and as directed by Engr-in-Charge.

M & L for walling of random rubble stone masonary uncoursed well bonded, bedded and solidly hearted built in cement mortar 1 :6 complete all as specified in cluding flush pointing in the same mortar as the work proceeds.

M&L for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints of random rubble walling uncoursed or brought upto courses with maximum depression on face from straight edge n. Exc 40mm for lime or sand stone complete all as specified.

M & L for raised pointing in cm 1:4 incl raking out joints all as spd & dir by Engr-in-Charge

M & L for boulders filling, dry hand packed tightly at back of retaining wall (Boulders of 150mm size and over) all as spd & dir by Engr-in-Charge

S&F peg set of 6 (six) mild steel fancy type complete all as directed & specified by Engr-In-Charge.complete .

M&L for plain cement concrete 1:2:4 type B-2 as in floors 50 mm thick complete all as directed & specified by Engr-In-Charge.

M & L for cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in bed block/coping band or string etc. Including use of necessary formwork complete all as specified.

M&L for flush shutters, 35 mm thick ,solid core construction, with block board core and plywood face panels, commercial type on both sides, both face are covered with decorative face veneer with lipping/frame to matchincluding beading complete all as specified and as directed by Engr-in-Charge.

S&F in repair 18 mm thick prelaminated particle boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws as in shelves , cup board shutters etc,complete all as specified and as directed by Engr-in-Charge. and directed.

S & F hasp and staple, 100 mm, mild steel, safety type, stove enalmelled black , including bolt to hinge plate and fixed with screws, all as specified .

S & F Continuous ( Piano ) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm complete all as directed & specified by Engr-In-Charge.

S & F brass chromium plated towel ring round 200mm dia, fixed in repairs,complete all as specified and as directed by Engr-in-Charge. and as directed by Engr-in-Charge.

S & F soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, fixed in repaircomplete all as specified and as directed by Engr-in-Charge.

S&F rotational moulded PVC water tanks of Cap 500 Ltrs cylindrical verticle with closed top hoisted and fixed in position all as spd in SSR Part incl fixing of 20mm PTMT float valve medium grade dismanteling of existing unserviceable water tanks and removal from site complete all as directed & specified by Engr-In-Charge.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc.and making good, cutting not exc 10 cm grith complete all as directed & specified by Engr-In-Charge.

S&F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15mm dia complete all as directed & specified by Engr-In-Charge.

S&F bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairscomplete all as specified and as directed by Engr-in-Charge.

S&F shower rose, brass, chromium plated, with CP arm 120mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repaircomplete all as specified and as directed by Engr-in-Charge. and directed.

S&F angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairscomplete all as specified and as directed by Engr-in-Charge. and directed.

S & F in repair curtain rods 25 mm dia fancy type metal polished and fixing brackets and holders as requiredall as dericted by Engr In charge.

M&L for taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to storecomplete all as specified and as directed by Engr-in-Charge..

M&L fo rtaking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to storecomplete all as specified and as directed by Engr-in-Charge..

M&L for taking up or down 25mm steel tubing and connections, including cleaning for refixing or removal to storecomplete all as specified and as directed by Engr-in-Charge..

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore complete all as specified and as directed by Engr-in-Charge.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore complete all as specified and as directed by Engr-in-Charge.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 25mm bore complete all as specified and as directed by Engr-in-Charge.

M&L for plain cement concrete 1:4:8 type D-2 as in floors 100mm thick complete all as directed & specified by Engr-In-Charge.

M&L for machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over 50mm thick sand cushion complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 10mm thick on fair face of brick work or concrete surfaces with CM (1:3) with water proofing compound even & smooth w/o using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for preparing RCC roof slab top by wire brushing and cleaning the dust and forign materail etc complete and applying a coat of hot blown bitumen 85/25 grade @ 1.20kg/Sqm over a coat of bitumen primer @ 0.40 ltrs/Sqm and there after laying of a layer of APP based polymeric membrane (five layered with centre core as 100 microns high molecular high density polyethylene film) weighing not less than 3.5 kg/Sqm and reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on bituminous surface by press application method with 75mm side overlap and 100mm end overlap. The membrane has to be laid with LPG torch application and overlaps sealed and finished neat, after that applying one coat of bitumen 85/25 grade on top surface @ 1.20 kg/Sqm and blinded with premier dry sand @ 0.5 kg/Sqm dusted over bitumen coat,complete all as specified and as directed by Engr-in-Charge.

M&L for apply two coats of aluminium paint on roof complete all as specified and as directed by Engr-in-Charge.

M&L for demolition and breaking up of drain pipe of 150 mm (Salt glazed ware, AC or reinforced concrete) set in cement mortar,complete all as specified and as directed by Engr-in-Charge.

M&L for demolition and breaking up of drain pipe of 200 mm (Salt glazed ware, AC or reinforced concrete) set in cement mortar,complete all as specified and as directed by Engr-in-Charge.

M&L for concrete bed to drain pipes of bore 150mm including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate including necessary shuttering, Excavation RFR , Removal and supports,complete all as specified and as directed by Engr-in-Charge. Note:- (i) Thickness of bed belew barrel of pipe -10 cm. (ii) Width of bed :- outer dia of pipe plus 30 cm.

All as per item No116 here in before, but 200 mm dia of pipe..

M&L for salt glazed stone ware drain pipes of internal diameter 150 mm, grade 'A' quality, laid in trenches and jointed in cement,complete all as specified and as directed by Engr-in-Charge.

M&L for salt glazed stone ware drain pipes of internal diameter 200 mm, grade 'A' quality, laid in trenches and jointed in cement complete all as specified and as directed by Engr-in-Charge. and as directed .

S&F PVC (SWR). Pipe 110mm dia in any length with rubber ring joints, fixed to walls or in any hieght or laid in trenches or in floors all as directed by Engr-in-Charge.

S&F PVC (SWR). Pipe 75 mm dia in any length with rubber ring joints, fixed to walls, weep holes or in any hieght or laid in trenches or in floors all as directed by Engr-in-Charge.

S&F PVC (SWR) bends of 110 mm dia complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) bends of 75 mm dia complete all as specified and as directed by Engr-in-Charge.

M&L for precast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in cover slabs kerb stones and similar articles with plain faces, set in cement mortar 1:6,complete all as specified and as directed by Engr-in-Charge. and directed by Engr-in-Charge. .

M & L for precast cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate bonders for stone walling, set in cement mortar 1:6 with paling fair faces including chambers weathering etc. Complete all as specified.

M&L for rounding to edges of stone slabs one edge,such as in steps, cooking platform, shelves etc & other similar situations all as specified & directed by Engr-In-Charge.

M&L for surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in any type soil complete all as per specified.

M&L for excavation over areas in any type of soil not exceeding 1.50m deep and getting out complete all as specified.

M&L for excavation in trenches n.exc 1.5m wide & n.exc 1.5m in depth getting out in any type soil complete all as per specified.

M&L for removing excavated material n.exc 50m & depositing where directed at a level n.exc 1.5m above the starting point complete all as per specified.

M&L for returning filling including spreading leveling watering and well ramming in layers exc. 25 cm all as specified complete all as per specified.

M&L for hardcore of broken stone or boulders of gauge n. exc. 63mm ,deposited spread and levelled in layers n. exc. 15 cm thick,watered and rammed to a true surface all as specified .

M&L plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in floors Or Subbase 75 mm thick complete all as specified.

Taking down copper/aluminium point wiring (light fan socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors, etc. all as specified and as directed by engineer in charge.

M&L for point wiring with PVC insulated unsheathed, HRFR 1100 volts grade stranded copper conductor cable single core 1.5 Sqmm for one light / fan point controlled by one way switch, and wire to be drawn in and including concealed conduit of dia not less tham 25mm complete with all accessories including MS sheet metal 1.2 mm thick switch board of suitable size be fixed flush wall , with 3 mm thick ebonite sheet cover and brass screws, cap washers etc. or to be fixed on wall respectively including white washing / colour washing / distembering to match the disturbed surfaces as directed by EIC and providing earth continuity wire using PVC insulated, un sheathed single core stranded / solid copper conductor cable of size 1.5 Sqmm.(Cutting chases for counduits shall be measured and paid separately)

All as per item No. 135 above but for bell / buzzer on independent board controlled by one push button bell switch.

All as per item No. 135 above but for one 5 Amps socket outlet on independent board.

All as per item No. 135 above but wire size 2x2.5 Sqmm to controlled the 3 pin 5 / 15 Amps socket outlet on independent board.

All as per item No. 135 above but controle by 2 Nos.of two way switch.

M&L For point wiring with 1.5 Sq. mm copper conductor, single core, PVC sheathed, cable, to controle one 3 pin socket outlet, 5 Amps on the same board with other switch.

M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth all as specified and directed by engineer in charge.

S&F Switch Piano, flush type, One way, single pole, 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F Switch Piano, flush type, two way, single pole, 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F Switch socket combination 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F Switch socket combination 5 / 15 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as directed by Engineer - in - Charge.

S&F Calling bell, suitable for 230 Volt, 50 Hz, single pole, AC supply complete all as directed by Engineer- in - Charge.

S&F Push bell switch piano, flush type, white colour, single pole, 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F Stepped type, electronic fan regulator, flush type on the existing phenolic laminated sheet etc. as required complete all as directed by Engineer- in - Charge.

S&F Two in one, 3 Pin, 5 Amps, flush type socket outlet complete all as directed by Engineer- in - Charge.

S&F Slim linear LED lighting fixture 4/5W watt LED batten, with full base of extruded poly carbonate isolated driver, complete making all connection from ceiling rose to fittings including testing complete all as per the direction of Engr-in-Charge. Make of LED -Syska Cat No:SSK-SQ0401/Wipro Cat No : D530565/C&S Cat No: LTTBIF5WLED/W/ Havells: Cat No: LHEXBXPNIN1W005

S&F decorative ultra slim linear Aluminium Extruded LED lighting fixture 10 Watt LED of input voltage AC 220V-240V, 50 Hz with colour tempetrature 6500K more than 1080 lumens of IP 20 complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling rose to fitting complete all as per directed by Engr-in-charge. Make: Wipro Cat No : D531065/Havells: Cat No: LUMILINEPLUSBS10WLED865SPCSS/ Philips Cat No : BN 021 LED10S- 6500 PSU GR S1

Taking down ceiling fan / exhaust fan , ceiling cable end, dismantling blades and kept in safe custody for refixing on same location all as specified and directed by engineer in charge.

M&L for repair of ceiling fan 1200mm sweep of any make obtained from above item, oiling, greasing cleaning slot, over hauling & replacement of defective nut bolts washer etc including painting all as specified and directed by Engr-in-charge.

Hanging /fixing only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan obtained from item no 153 complete all as per the direction of Engr-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level, connected to 4 mm earth lead by means of bolts, nuts, check nuts and washers of galvanised iron of steel all as shown in electrical plate No. 5, including Excavation, PCC, Funel and GI protection pipe etc. connected to earthing test point all as specified or indicated including testing on completion.

Taking down serviceable MCB DB with MCB etc after disconnecting for re use or for credit all as directed by engineer in charge.

Fixing only serviceable MCB DB of any type and capacity obtained from Item No 03 complete all as specified and directed by engineer in charge.

S & F sheet metal TPN DBs - DPX3 160 MCCB DBs 04 way (DPX³ 250+12) with metal door 415 volts grade IP 43 Protection Grade fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and directed by Engr-in-charge.Make Legrand Cat part No : 5077 50 or equivalent to Shnieder

S & F DPX3 thermal magnetic MCCB 4 pole 160 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by engineer in charge for MCCB DB.all as specified and directed by Engr-in-charge Make Legrand, Cat part No : 4202 07 or equivalent to Shnieder

Supply fixing connection and testing MCB SP6-32 Amps all as specified and directed by Engr-in-charge:Make: Legrand

Supply fixing connection and testing MCB SP 40 Amps all as specified and directed by Engr-in-charge

Fixing only serviceable MCB SPN/SP any capacity obtained from item no 157 as above all as specified and as directed by engineer in charge.

Taking down serviceable/unserviceable electric meter including meter box from existing position carefully for refixing including making good to disturbed surfaces (Note : Disturbed surfaces should making good by Plastering/distembering/colour washing/white washing to match with existing surfaces)

Re fixing of serviceable electric meter obtained from item No 164 with meter box by scouting to the wall and fix firmely all as specified and directed by engineer in charge.

S&F Slim linear LED lighting fixture 20 Watt LED batten, P.F greater than 0.9, input voltage range from 90 Volts to 280Volts with full base of polycarbonate extruded section acting as a heat sink with closed back isolated driver complete making all connection using 1.5sqmm copper conductor multistranded PVC insulated 2 core flexible cable with from ceiling rose to fitting complete all as specified and as directed by engineer in charge.Make Make : Syska Cat No: SSK-SQ2001/Havells Cat No: LHEXBXPNIN1W020/ or equivallent to Wipro

Supply and fixing LED Bulk head (6500K) fitting of 09/10 Watt surface mounting type extruded aluminium body with diffuser complete with testing all as specified and directed by engineer in charge. Make Syska Cat No: SSK-BH-9W /Wipro Cat No : DA11265/Crompton :Cat No: LBHE-10-DL /Havells: Cat No: RUGBYNEONFT10WLED860SSYMTOPC

M&L Earthing complete with using copper plate 60×60cm ×3.15mm thick electrode and 20×3.15 mm copper strip as earthing lead , buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to required 20x3mm copper strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-5 of MES Part-1 fixed in replacement including testing on completion including the material and labour of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC Pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of Earthing. Note : (a) On testing after completion of earthing, if the desired earth resistnace is not obtained, the earthing will be done by the contractor at his own risk and cost to the entire satisfaction ot the engineer incharge. (b) The contractor shall quote his rate considering taking down cost of existing unserviceable earthing.

S&F earth continuity conductor copper strip 20 mm x 3.15 mm with saddles and fixing screws etcor main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as directed by Engineer-in-charge.

S&F earth continuity conductor aluminium strip 32 mm x 6 mm with saddles and fixing screws etcor main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as directed by Engineer-in-charge.

S&F earth continuity conductor aluminium strip 25 mm x 3mm with saddles and fixing screws etcor main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as directed by Engineer-in-charge.

S&F Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as directed by Engineer.in.charge.

S&F Air termination, single pointed, aluminium rod 12mm dia and 300mm long complete all as directed by Engineer.in.charge.

Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw complete all as directed by Engineer-in-charge.

S&F earth continuity or main earthing lead fixed to wall or reccess or chases or buried in ground or drown in conduit/pipe or fixed to poles or any others indicated situation for loop earthing etc as required of size 25x4 mm galvanised strip complete all as specified and as directed

M&L for 40 mm dia steel tube (light grade) galvanised with fittings laid in trenches/wall/roof for protection of earthing/lighting strips for crossing the roads/fixing on walls etc complete all as sepecified and directed

Earth continuity conductor or main earhing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed

M/S JANDIAL ENTERPRISES

TULSI RAINA AND SONS