PROVN OF DEFICIENT CEILING FANS AND EXHAUST FANS PH II AT SMQ AREA, DESERT COOLER AND WATER HEATER OF OFFICERS INSTITUTE AND SPECIAL REPAIR REPLACEMENT AGAINST BER DESERT COOLERS AT VSN NAGPUR

Amount

M & L for point wiring (surface) complete with FR PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in PVC Caping Casing or PVC Conduit of suitable size, ISI marked, including all accessories and making good the disturbed surface, with and including suitable modular boxes surface type of make legrand ,switch plates of make Legrand and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed by Engr-in-charge. Make of cable : Polycab, Finolex ,Havells (a) One Ceiling Fan/ Exhaust fan point controlled by one switch.

S & F Switch modular type, single pole one way 6 Amps, 250 volts AC suitable for modular switch boxes without indicator all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent

S & F 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675531 or equivalent

S & F ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed. Make : Leader, Anchor

Supply & Fixing New Exhaust fan PVC body 10" ( 250 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified. Make : Bajaj, CG, Wipro, usha Note:- Rates for making suitable holes in wall for fixing of exhaust fan should be measured separately under appropriate item

Supply & Fixing New Exhaust fan PVC body 8" ( 200 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified.Make : Bajaj, CG, Wipro, usha Note:- Rates for making suitable holes in wall for fixing of exhaust fan should be measured separately under appropriate item

S & F Energy saving ceiling fan 1200 mm sweep with double ball bearing in opal white colour and BEE 5 star rated BLDC energy consumption less than 40 Watt complete including provision of 3 core copper wire of size 1.5 sqmm , connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed. Make : Crompton Greaves, Havells, Orient, Usha.

S & F 'D' clamp after cutting the ceiling of roof upto existing steel rod and necessary binding/welding of D Clamp with existing reinforcement and making good with cement reinforcement and finishing with matching with existing surfaces, including necessary accessories, nuts and washers for hanging of ceiling fans complete all as specified and as directed.

M & L for making holes in surface wall for exhaust fan upto 250 mm size all including plastering and making good the disturbed surface complete all as specified and directed

Supply installation , testing & commissioning of GI Steel body desert cooler with GI Wired Frame and complete powder coating with CFM 4000,Specification: Body Size 48X30X23 Inch made from 1 mm GI sheet, GI Angles of 25mm size and 14 guage hot dip GI mesh,completely powder coated inside-out, 18" Heavy Duty Exhaust fan with copper winding Crompton/Koolmoan motor of 1350 RPM fitted on the body using wooden plank of size 4 inches X 1 inch, Khaitan or equivalant make submersible pump of 18 Watt, electronic regulator of 1500 Watt, completely insulated wiring with joints covered with plastic box to avoid spark, 9 feet long lead wire of ISI mark with conceled socket of 5 Amp, and aspen pad of 1.25 inches thickness made of first quality green wood wool and cotton net, Water tank (Tray) made of 1 mm GI sheet and duly Powder coating inside-out,GI sheet should be from JSW with 85 micron coating and powder paint should be from Nerolac/Asian and with 70 micron coating complete all as specified and directed. Make - RAM Coolers/Crompton/Bajaj

Taking down old unserviceable steel tube of 50 mm dia and supply & laying new GI tube, 50 mm dia, medium grade, galvanised, with all fittings such as tees, bends, elbows, reducers, union etc. and fixing accessories such as lock nuts, saddles, pipe hook, etc complete fixed to walls and ceilings or laid in floors for desert cooler connection all as specified and directed. Make: Tata/Surya Prakash/Jindal

Taking down old unserviceable steel tube of 40mm dia and supply & laying new GI tube, 40 mm dia, medium grade, galvanised, with all fittings such as tees, bends, elbows, reducers, union etc. and fixing accessories such as lock nuts, saddles, pipe hook, etc complete fixed to walls and ceilings or laid in floors for desert cooler connection all as specified and directed by Engr-In- Charge. Make: Tata/Surya Prakash/Jindal

Taking down old unserviceable steel tube of 25mm dia and supply & laying new GI tube, 25 mm dia, medium grade, galvanised, with all fittings such as tees, bends, elbows, reducers, union etc. and fixing accessories such as lock nuts, saddles, pipe hook, etc complete fixed to walls and ceilings or laid in floors for desert cooler connection all as specified and directed by Engr-In- Charge. Make: Tata/Surya Prakash/Jindal

Taking down old unserviceable steel tube of 20mm dia and supply & laying new GI tube, 20 mm dia, medium grade, galvanised, with all fittings such as tees, bends, elbows, reducers, union etc. and fixing accessories such as lock nuts, saddles, pipe hook, etc complete fixed to walls and ceilings or laid in floors for desert cooler connection all as specified and directed by Engr-In- Charge Make: Tata/Surya Prakash/Jindal

Taking down old unserviceable steel tube of 15mm dia and supply & laying new GI tube, 15 mm dia, medium grade, galvanised, with all fittings such as tees, bends, elbows, reducers, union etc. and fixing accessories such as lock nuts, saddles, pipe hook, etc complete fixed to walls and ceilings or laid in floors for desert cooler connection all as specified and directed by Engr-In- Charge. Make: Tata/Surya Prakash/Jindal

Supply and fix Gun Metal Globe or Gate Valve with iron wheel head screwed both ends for iron pipe of size 50MM dia and fixed on pipe complete all as specified and directed by Engr-In-Charge Make : Kirloskar/Zoloto/Leader

Supply and fix Gun Metal Globe or Gate Valve with iron wheel head screwed both ends for iron pipe of size 40MM dia and fixed on pipe complete all as specified and directed by Engr-In-Charge Make : Kirloskar/Zoloto/Leader

Supply and fix Gun Metal Globe or Gate Valve with iron wheel head screwed both ends for iron pipe of size 25MM dia and fixed on pipe complete all as specified and directed by Engr-In-Charge Make : Kirloskar/Zoloto/Leader

Supply and fix Gun Metal Globe or Gate Valve with iron wheel head screwed both ends for iron pipe of size 20MM dia and fixed on pipe complete all as specified and directed by Engr-In-Charge Make : Kirloskar/Zoloto/Leader

Supply and fix Gun Metal Globe or Gate Valve with iron wheel head screwed both ends for iron pipe of size 15MM dia and fixed on pipe complete all as specified and directed by Engr-In-Charge Make : Kirloskar/Zoloto/Leader

Taking down old unserviceable pvc water tank of any capacity and Supply and fix new rotational moulded polythene water storage tank of capacity 500 ltr three layer (cylindrical vertical with closed top threaded type ) in white colour and fix in position all as specified and directed. Make: SINTEX /PLASTO .

Taking down old unserviceable pvc water tank of any capacity and Supply and fix new rotational moulded polythene water storage tank of capacity 1000 ltr three layer (cylindrical vertical with closed top threaded type ) in white colour and fix in position all as specified and directed. Make: SINTEX /PLASTO

Supply & fix 25 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixing with all connected accessories complete (Minimum weight-455 gms) all as specified and directed

Supply & fix 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixing with all connected accessories Complete (Minimum weight- 210 gms) all as specified and directed

Material and labour for cutting of road , pavement , hard standing by using cutting machine/compressor machine and making good using cement mortar 1:2:4 and layiing of 50/40/25/20MM GI Pipe pipes given in schedule all as specified and directed

Rerouting/Repair of existing pipe line / sewage line / telephonic cable/ road/ path/ wall and other existing structure damaged during repair / replacement of water supply line and making good to same specification all as specified and directed

Material and labour for providing new plywood of 6mm thickness,grade BWR,type BB,fixed with screwes to timber frame work in room windows suitable size for desert cooler and providing suitable opening for air delivery complete all as specified and directed.

M & L for fabrication of flat angle iron frame work for cooler stand of size 50mm x 50mm x 5mm including welding, Painting fixed in wall alongwith fastner/nut bolts complete all as specified and directed by Engre-in-charge

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25litres, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. Make: Racold, Bajaj, Usha, Crompton

Supply, installation, testing, commissioning of desert cooler of capacity 4500 Cum per hour made out of 01 mm thick galvanized steel sheet with complete fully exhaust fan 450 mm sweep, 1400 rpm motor and suitable capacity submersible pump and wood wool fitted in frame made from 25x25x3 mm angle iron and 25x25 mm size MS Wire mesh net of 14swg dia fitted on both sides for supporting wood wool including suitable size top and bottom water tray made of 1.00 mm GI sheet 1000 watts speed control electronic regulator, suitable size connection cable 3 core with copper conductor with moulded plug top, fan blade and all fixing accessories complete all as specified and as directed Note:- All electrical equipments shall be of ISI Marks. Make Bhogal or equivalent.

S&F 15 mm dia ball brass valve set and providing of new pvc float valve set of 15 mm dia PTMT ball valves, high pressure, with polythene float and fly nut complete. Make : Prayag, Polytuf

S&F 15mm GI tubes, ‘medium grade’ galvanized with all fitting and fixed complete to walls and ceilings or laid in floors for desert cooler connection complete all as specified and directed Make: Jindal / Surya Prakash/ TATA

Supply and fix bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed size 15 mm bore dia of pipe complete all as specified and directed. Make: Jaguar/ Prayag/ Jindal

Supply and fix new rotational moulded polythene water storage tank of capacity 500ltr three layer (cylindrical vertical with closed top) in white colour and fix in position all as specified and directed. Make: SINTEX/PLASTO with ISI mark.

Supply and fix Refrigerators 360 Ltrs, electric driven (single phase), convertible PLUS 3 Star with inverter linear compressor complete all as specified and directed. Make: LG Model No GL-T402JES3 or equivalent in Samsung/Whirlpool

Supply and fix water cooler electric driven (single phase), fully stainless steel having approx storage capacity of 150 Litres and nominal cooling capacity of 150 Litres per hour complete all as specified and directed. Make: Blue Star/Voltas/LG

M/S JAINENDRA KUMAR JAIN

Shri Sai Enterprises

M/S. ELECTROPOWER TECHNOLOGIES