Purchases of Hand pump IM-2 Spare Parts And Hand pump Assly and G.I. Pipe at ZP Akola

Amount

Reducer cap for cylinder of Deep well hand pump IS 9301/1990

Cylinder body with brass liner for Deep well Hand pumps ( IS 9301/1990 )

Upper valve for Deep well Hand pumps ( IS 9301/1990 )

Check valve for Deep well Hand pumps ( IS 9301/1990 )

Check valve seat for Deep well Hand pumps ( IS 9301/1990 )

Specer for Deep well Hand pumps ( IS 9301/1990) and Deep well Hand pumps (VLOM) ( IS 130561/1991 )

Rubber seat retainer for Deep well Hand pumps ( IS 9301/1990 )

Front cover for Deep well Hand pumps ( IS 9301/1990 )and Deep well Hand pumps ( VLOM )( IS 130561/1991 )

Head for Deep well Hand pumps ( IS 9301/1990 ) and Deep well Hand pumps ( VLOM ) ( IS 130561/1991 )

Third plate for Deep well Hand pumps ( IS 9301/1990 )and Deep well Hand pumps ( VLOM )(IS 130561/1991 )

Chain with coupling for Deep well Hand pumps IS 9301/1990 )

Handle for Deep well Hand pumps ( IS 9301/1990 )

Connecting rods for Deep well Hand pumps ( IS 9301/1990 )

Water tank for Deep well Hand pumps ( IS 9301/1990 )

Pump bucket for Deep well Hand pumps ( IS 9301/1990 )

Rubber seating ( upper valve ) for Deep well Hand pump ( IS 9301/1990 )

Rubber seating ( Lower valve ) for Deep well Hand pumps ( IS 9301/1990 )

Sealing ring for Deep well Hand pumps ( IS 9301/1990 )

‘O’ ring for Deep well Hand pumps ( IS 9301/1990 )

Handle axle for Deep well Hand pumps ( IS 9301/1990 )

Cylinder Assly comp. Unit ( Inclusive of stainless steel plunger rod 12 mm dia. With nitrite rubber,Pump bucket ) suitable for Deep well Hand pumps –I

Single side shielded bearing confirming to IS 6455/1972 Suitable for Deep well Hand pumps ( SKF make )

Hex. Bolt m 12x20 as per IS 1363/1984

Hex. Bolt m 12x40 as per IS 1363/1984

Hex. M 12 Nut

Chain High tensile Bolt M 10x 1.5 x 40 IS 1365 Bolt

Chain High tensile nut M-10

Brass liner as pev. IS 4071/1981 suitable for Deep well Hand pumps IM – II (Brass Liner)

Upper valve Assly with 2 Nos. Nit rubber pump buckets and comprising of pulnger yoke body,upper valve rubber seating spacer follower suitable for Deep well Hand pumps IM – II

Lower valve Assly comp suitable for Deep well Hand pumps IM – II

Leather pump bucket washer for IM II suitable for Deep well Hand pumps original “ Shakti Make”

Rod coupeling for suitable Deep well Hand pumps

32 mm G.I. Pipe Coupling

Handpump Body complete –IM 2

Hand pump Assly and G.I. Pipe: Manufacture supply and delivery of BIS marked fully hot galvanized Deep well hand pump ( India mark-II )assembly complete unit with 12 Nos. of connecting rods ( Bright bar ) of 12 mm dia. 3 mtrs. Length each confirming to IS 15500 with is amends / revisions up to date including BIS packing loading, unloading and stacki9ng charges to the Zilla Manufacture supply and delivery of BIS marked fully hot galvanized Deep well hand pump ( Indiamark-II )assembly complete unit with 12 Nos. of connecting rods ( Bright bar ) of 12 mm dia. 3 mtrs. Length each confirming to IS 15500 with is amends / revisions up to date including BIS packing loading, unloading and stacki9ng charges to the Zilla Parishad GSDA stores may any where in Maharashtra state. The component identification and manufactures identification mark shall be as per BIS specifications with telexcopic stand assembly in live Parishad GSDA stores may any where in Maharashtra state. The component identification and manufactures identification mark shall be as per BIS specifications with telexcopic stand assembly in live of normal stand for 150 m.m dia bore wells.

Hand pump Assly and G.I. Pipe: 32 m.m. Nominal bore, Hop dia Galvanized screwed and socked pipe in 3 mtrs length with a tolerance of ( + ) 0 m.m to ( - ) 25 m.m confining to IS 1239/ 1990 medium class. The socket shall be manufactured from seamless pipe or machined form solid bar conversing to grade fe 410-S of IS 226/1975 with a dia mentions ( Length and dia. ) Specified in 1239 ( part –2 ) 1982 and shall hot dipped galvanized . One end f theriser pipe shall be fctted with hot pip galvanused coupler and the other with a thread protector pipe supplied should have IS 1239 mark embossed on It. Tolerance on thickness and mass, galvanizing leak tightness test on/tubes chemical comp. Dia. Bend test sampling critention for confirmly, marking protecting and packing and all other details should be follower as per IS 1239

NATIONAL STEELS

DEEPWELL PUMPS AND ENGINEERING CO. PVT. LTD.

QUALITY PUMPS PVT LTD