WBPWDTE/EE/BED/NIQ_117/Q of 2024-25

Amount

S & I of MS Loop box both side opening size 900mm (H) X 600mm (L) X 450mm (W) made by 3.15 mm(T) MS Sheet powder coated paint all round with rain shade,gland plate,locker type lock & key for both side door, 25mm (T) full wooden partition at the middle, base frame made by 50x50x6 mm MS equal angle incl 63A FP MCB Isolator & 04 nos (20x5)mm cu bar and brick foundation with plastering & 3 mm net cementing all round, base painting(as per drawing)

Supplying and fixing 415V, TPN 63A SFU with sheet steel enclosure on angle iron with nuts bolts etc incl. S & F 3 nos. bolted type HRC fuse as per following rating (Make : L&T),

Supplying and fixing Timer panel M S Box with hing type front open door and threathed locking arrangement in one side made of 18 SWG CRCA MS Sheet of size 500x300x200 mm. fixed in wallon flate iron frame as per direction EIC.The Box shuld comprising following accessorise. A) 230 V , 50 Hz ,16 Amp Single dial 1 x 24 Hrs.Timer ( Microrex QT31 ) of quartz driven running reserve Day dial back up by nickle cadmium battery (Make - L&T-AUTS03ANA00 / Legrand ) – 1 nos B) 3 Pole MNX 50 (Make:- L&T Cat No- CS97075----- 01 nos C) 4 pole 32 Amps MCB ( L & T / Legrand ) - 1 no D) Auto / Manual By pass Toggle Switch arrangement – 1 no. E) 250 V , Diode type neon Indicator lamp ( Make - Legrand / L & T ) – 1 no F) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar , with spring washer ,nuts etc with this box for termination of power to complete arrangement must be wiring by 4 Sq mm PVC insulated Cu wire with suitable length incl socketing /lugs etc as per requirement & direction of EIC (for controlling outdoor street light fitting fittings)

Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make KEI / Fort Gloster] 4 Core 16 Sq. mm

4Core 25 Sq. mm

Laying of cable after cutting floor/pavement/wall as per GS for the following Sizes. 2.5 to 35 Sq. mm

Laying of cable upto 35 sqmm in underground trench as per GS for the following numbers of Cables. 1 No Cable

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS.4 Core 16 Sq. mm

4Core 25 Sq. mm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings as per GS 40 mm dia

Supply & delivery of hot dip galvanized (As per IS: 2629/IS 2633/IS 4759 & with its latest amendment) 9 mtrs length decorative octagonal pole made of HT steel(Sheet thickness-3 mm) conforming to grade S355JO/JR of BSEN 10025 along with a welded base plate of required size stud of termination of 4 core 10/16/25/35 sq.mm al (Ar) cable incl S&F 1 no 6 amp SP MCB (c-series) with 4 way stud for each outgoing circuit to the fittings with proper pad locking arrangement for the pole. [Top dia (A/F)-70 mm Bottom dia (A/F)- 175 mm] Base plate size: 275 mm (L)x 275 mm(W) x 16 mm(Thickness). Foundation Bolt-4-M24 x 750 mm(L) x 4 nos 'J' type bolts (Make-Transrail / Valmont/Lysaght/Bajaj) (T.C & G.C must be submitted to EIC before execution) N.B: Specification of poles may be changed as per manufacturer standard, the agency must approve the material from the EIC before execution and should visit the site physically.

Errection of the following decorative octagonal pole by designing & casting RCC(M-16)foundation of suitable size as specified below considaring the safe soil bearing capacity at site as 10 T/sq m incl excavation of earth providing cutting bending and placing in position reinforcement as per drawing & providing pipe for cable entry & exit as per required & providing and fixing of 4 nos foundation bolt (J type) as specification below & as per drawing on ground surface incl back filling cleaning extra earth---up to 9 mtr. [Foundation size-500mm(L)x500mm(W)x1200mm(H), J Bolt size-M24 x 750mm [L].For 9 mtr Octagonal Pole. N.B : Specification of poles may be changed as per manufacturer standard, the agency must approve the foundation design from the EIC before execution and should visit the site physically.

S&F 50 mm. dia 1.5 mtr. long detachable type Single arm bracket, suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC. (Make-Transrail / Valmont/Lysaght/Bajaj)

S&F 50 mm dia 1.5 mtr. long detachable type G.I. Double arm bracket (180 deg Adjustable), suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by SS bolts, nuts and washer as per direction of EIC. (Make-Transrail / Valmont/Lysaght/Bajaj)

S&F Ring Type Brackets (48.3.OD x3.2 ) suitable for pole head. The bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC to accomodate 04 nos Flood Light. (Make-Transrail / Valmont/Lysaght/Bajaj)

Supply and Fixing of 230 V, 50 Hz Operated 120 W LED type Outddor street light with Toughened glass with aluminum die casting with IP 64/65/66 protection with inbuilt surge protector Device of rating upto 10 KV (Make:- Crompton Cat noTRP-426-120-57-HL2-LM-NBK or similar model of Surya/Bajaj or any brand recognised by EIC. (To be properly fixed (With rag nuts and bolts) on Single and Double arm brackets of Octagonal Pole)

Supply and fixing of 230 V, 50 Hz Operated 160 W LED type FloodLight with Toughened glass with aluminum die casting with IP 64/65/66 protection with in-built surge protector Device of rating up to 10 KV. (Make:- Crompton cat no TFS-510-150-57-60D-HL2-LM-NGG or similar model of Surya / Bajaj or as per choice by EIC. (08 nos to be properly fixed (With rag nuts and bolts) on round header of octagonal pole and Others building roof top)

Supplying & Fixing of PVC water proof type Loop box (Make-Sintex) of size 8"X10" comprising of 4 way 100 Amp. Capacity brass stud/terminal make- AC /DC.,having hinged PVC top cover & 4 mm thick with rubber gasket lining,railway type mechanical locking arrangement,comprising of one 250V,15A kit-kat fuse unit,one NL on porcelain insulator etc. conceal in wall as per direction of EIC

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the 19mm polythene pipe and by the prelaid GI fish wire and making necy. connection as required.

Excavation of soil for installation of Earth Electrode and filling & ramming as per GS For Morum Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS 4SWG

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall as per GS

Karmakar electrical Repairing Works (BID ID -5605822)

RS SYSTEMS AND PROJECTS (BID ID -5597425)

DURGAPUR POWER (BID ID -5596878)