Loading…
Loading…
Tender Value
₹6.5 Cr
EMD Value
₹12.9 L
Closing Date
8 Sept 2026, 3:00 pm
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
CPC/C/JBP
16 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of "V/N" or "V whichever is less where V = Advertised value of the tender in crores of Rupees, N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-8 of Chapter 6 of tender document along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet, otherwise the offer will be SUMMARILY REJECTED.
Special Technical Criteria- This work is of highly technical nature for evaluation of bridge health as per RDSO quidelines. The bidders who have completed all activities related to instrumentation of Railway bridges (i.e. from modelling, design, validation to submission of final proof checked report of instrumentation and acceptance of the same by Railway) will only be considered for technical evaluation.
45 conditions · 11 needing a document upload
If Bid Security is submitted through mode of Bank Guarantee, then tenderer must submit the scanned copy of the Bank Guarantee (as per Specimen Format at Annexure-Q of Chapter-6 of Tender Document) submitted towards Bid Security and the original bank guarantee shall be submitted/delivered in- person to the official /office mentioned under item no.-16 of Top sheet-1 (as per para-3 of Instruction to Tenderers (ITT) of Chapter-2 of tender Document) before closing date of submission of bids (i.e. excluding the last date of submission of bids). Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non-submission of original Bank Guarantee within above specified period shall lead to SUMMARILY REJECTION OF BID. In case of the Bid Security deposited through e- payment gateway, then the same should be confirmed by the tenderer.
Tenderer shall submit certificate as per Annexure- A & A-1 (as required) of Chapter-6 of the Tender document. However, if the bidder on behalf of tenderer including its constituents confirms and certify the provisions of Annexure-A on IREPS, the uploading of physical signed Annexure- A on IREPS portal is not mandatory. Further, Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. shall also submit a certificate as per Annexure-A1. Non submission of the certificate A & A1, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to SUMMARILY REJECTION of the offer
Tenderer shall submit details of works successfully completed or substantially completed during last 07 years ending last day of month previous to the one in which tender has been invited as per the format vide Annexure-F & F-1 (as applicable) of Chapter-6 of the Tender Document along with work completion/experience certificate. Non-compliance with this condition shall lead to SUMMARILY REJECTION of the offer.
Tenderer shall submit the details of the constitution of Firm i.e., Proprietary Firm/Partnership Firm/HUF/JV/Company Registered under Companies Act- 2013/Limited Liability Partnership/Registered Society & Registered Trust etc. as per Annexure-C of Chapter-6 of the Tender Document. Tenderer shall also submit the mandatory supporting documents such as copies of Partnership Deed, Power of Attorney, Memorandum of Articles, Articles of Association, Authorization, Certificate of Incorporation, Certificate of Registration, Deed of Formation, MOU of JV, Copy of PAN card etc. as stipulated under Para 14, 15, 17 & 18 of Chapter-2 of Tender Document. Important Note: - (a) In case one or more of the members of JV is/are partnership firm(s)/Proprietary Firm/HUF/Companies/LLP Firm(s)/Society(s)/Trust(s), the required documents of each individual member of JV shall be submitted along with the documents to be submitted on behalf of the JV, (b) non-submission of above documents (except PAN Card) or submission of incomplete documents shall lead to SUMMARILY REJECTION of the offer.
Tenderer shall submit Power of attorney duly notarized/authorization in favour of a single individual as per para-14,15,17 & 18 of tender form (second sheet) of SGCC and para 15 of Chapter-2 of Tender document. Non- submission of Power of attorney duly notarized/authorization as per above paras of SGCC/Tender document shall lead to SUMMARILY REJECTION of the offer/Bid.
Tenderer shall submit list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work as per the format vide Annexure-D of Chapter-6 of Tender Document. Offer submitted without these details shall be liable to be rejected.
Tenderer shall submit list of personnel/organization on hand and proposed to be engaged for the tendered work as per the format vide Annexure-E of Chapter-6 of the Tender Document. Offer submitted without these details shall be liable to be rejected.
Tenderer shall submit the information/declaration regarding association of Railway Officers with tenderer(s) as per Annexure-H of Chapter-6 in terms of Clause 16 of Chapter-2 of tender Document. On non-submission of this information, contract is liable to be dealt in accordance with provision of Clause 62 of Standard General Conditions of Contract.
Tenderer shall submit list of court cases during previous three financial years as per Annexure-I of Chapter-6 of the Tender Document.
Tenderer shall submit list of arbitration cases during previous three financial years as per Annexure-J of Chapter-6 of the Tender Document.
Tenderer shall submit the Certificate of familiarization to the work site as per Chapter- 5 of the Tender Document.
Tenderer shall submit broad plan of execution of work as per Annexure-K of Chapter-6 of the Tender Document.
Tenderer shall submit details of other credentials/facilities as per Annexure- N, Chapter-6 of the Tender Document.
Tenderer shall submit bank details i.e. Name of Bank along with Bank Branch Code, Accounts Number as appearing in the cheque book, IFSC Code and PAN Number, duly certified by the authorised official of the bank, to facilitate payment through ECS/NEFT/RTGS as per Annexure-O of Chapter-6 of Tender Document
For tenders having advertised cost of Rs. 10 lakhs and above: - If tenderer desired to take payment through Letter of Credit (LC) arrangement then tenderer shall exercise the option at the time of bidding itself and shall affirm having read for and agreed to the terms and conditions of LC option. For details refer Clause-7 of Chapter- 4 of Tender Document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Payment of Bid Security shall be accepted either in cash through e-Payment Gateway or as Bank Guarantee bond from a Scheduled Commercial Bank of India. BG shall be as per Annexure-Q of Chapter-6 of Tender Document. No other mode of payment shall be accepted. Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Bid Security. Labour Cooperative Societies shall submit only 50% of the Bid Security.
In case the date of closing mentioned in the NIT Header of e- tender document is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on the following working day after the closing date/time of tenders.
The tender shall be finalised based on submitted documents & no post tender correspondence shall be entertained. However, if any clarification is required by the Railway, the same will be sought from the tenderer which need to be provided by tenderer(s) within stipulated time failing which his/their offer(s) shall be dealt based on available information with Railways interpretation only.
While submitting offers the tenderer(s) generally commit mistakes in submitting the mandatory documents like Certificates regarding contracting experience, Audited Balance Sheet duly certified by the Chartered Accountant, Certificate in respect to true and factuality of documents, information in connection with evaluation of bid capacity, Power of Attorney, submission of tenders by authorised signatory, JV related documents etc. As such, THE TENDERER(S) SHOULD GO THROUGH THE TENDER DOCUMENT VERY CAREFULLY BEFORE SUBMITTING HIS/THEIR OFFER AND ACCORDINGLY UPLOAD ALL THE MANDATORY DOCUMENTS AND OTHER RELEVANT DOCUMENTS as per the formats enclosed in the tender document.
Tenderers must go through the tender documents to ascertain and get themselves acquainted with general conditions of contract, e-tendering process and two packet bid system (as applicable). The tenderer must also go through the other documents such as special conditions, additional technical conditions, specification, drawings, scope of work etc. attached as documents on the website.
It is the responsibility of the tenderer to keep watch on IREPS website regarding Addendum/Corrigendum etc. (if any) to tender notice up to the date of Bid closing. No separate intimation/ information shall be given in Newspapers or through any other means
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, labour, water etc. that may be encountered in course of execution of work.
No advance paymennt shall be made for moblisaion.
The quoted rates shall be inclusive of all taxes, levies etc (including GST and royalty) leviable by State/Central Govt. or by local authorities. The rate shall be inclusive of all sales / turn over tax, Service Tax including all other cess etc., on contract by respective State Govt.
Tenderers are requested to go through the enclosed Additional Special Technical Conditions/Specifications for various items included in tender schedule/Bid of quantities, etc.
Price Variation Clause (PVC) shall be applicable for Tenders having advertised value above Rs.2 Crores.
Rates quoted by the tenderer in the relevant fields of the Financial Bid only will be the ruling terms for deciding inter-seranking and any condition having financial repercussions, if quoted, anywhere else shall not be considered for deciding the inter-se-ranking.
a) In case of any information submitted by tenderer is found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. (b) In case of any information submitted by tenderer is found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year
No advance payment against Plant and Machinery shall be admissible.
No advance/stage Payment will be payable for supply of Cement and Reinforcement Steel. Cement and Reinforcement Steel shall be paid only after its actual use in work.
Assesment of Structural adequacy for raising of speed on RDSO standard composite and open-web girder Mega/Major Bridges(designed for 25 T axle loading standards) through instrumentation in accordance wiht RDSO Rport No. BS-106(Revision 2), in Jabalpur and Bhopal Division of West Central Railway(Total 12 Nos. Bridges)
CPC-WCR-02B-2026~WCR
CPC-WCR-02B-2026
Open
Works - General
12 Months
Jabalpur, Madhya Pradesh
₹0
₹12.9 L
14 Aug 2026
14 Aug 2026
25 Aug 2026
3 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 6,45,28,464 | ||
| Carrying out instrumentation of bridges as per RDSO BS-106 R2 for assessment of structuraladequacy of bridge components i.e. superstructure, bearings for designed loading standard, withcontractor's skilled/unskilled manpower etc. including submission of report containing necessary data,analysis of data and recommendations in the form of a report with proof checking of report from reputedIIT's. The scope of work includes- (i) inspection for assessing the condition of the superstructure of theidentified spans of the bridges. (ii) Non-destructive evaluation for condition assessment of the bridge spansto check for the strength, durability and condition of the superstructure. (iii) Instrumentation of the identifiedbridge spans using LVDTs, strain gauges and accelerometers. (iv) Field testing of bridge spans for differentstatic and dynamic test cases with varying speeds of test train formation of 25 tonnes standard loading ortrain of maximum loading standard available up-to the maximum prescribed speeds and to extrapolate theresult for required loading standard. (v) Signal processing and analysis of field test data for assessing thestructural performance of the bridge spans. (vi) Numerical simulation studies for assessing the structuralresponses at elemental level, validation with field data. (vii) Assessing the structural adequacy of theidentified bridge spans, and formulation of remedial measures for mitigation of excessive deflections, if any. (viii) Preparation of the technical reports (individually for each bridge) on field investigations, observationsand specific recommendations. (ix) Proof checking of reports from reputed IIT's. (For instrumentation of 01span per bridge) Note: 1) Instrumentation To be done twice, FIRST Round will give the general picture &SECOND Round can be planned six months or one year later for reconfirmation of the results obtained in firstround 2) Railway will provide suitable train formation with loaded wagon and block for instrumentation purpose | — | — | — | 4,87,66,660 | |
| Description:- Carrying out instrumentation of bridges as per RDSO BS-106 R2 for assessment of structuraladequacy of bridge components i.e. superstructure, bearings for designed loading standard, withcontractor's skilled/unskilled manpower etc. including submission of report containing necessary data,analysis of data and recommendations in the form of a report with proof checking of report from reputedIIT's. The scope of work includes- (i) inspection for assessing the condition of the superstructure of theidentified spans of the bridges. (ii) Non-destructive evaluation for condition assessment of the bridge spansto check for the strength, durability and condition of the superstructure. (iii) Instrumentation of the identifiedbridge spans using LVDTs, strain gauges and accelerometers. (iv) Field testing of bridge spans for differentstatic and dynamic test cases with varying speeds of test train formation of 25 tonnes standard loading ortrain of maximum loading standard available up to the maximum prescribed speeds and to extrapolate theresult for required loading standard. (v) Signal processing and analysis of field test data for assessing thestructural performance of the bridge spans. (vi) Numerical simulation studies for assessing the structuralresponses at elemental level, validation with field data. (vii) Assessing the structural adequacy of theidentified bridge spans, and formulation of remedial measures for mitigation of excessive deflections, if any. (viii) Preparation of the technical reports (individually for each bridge) on field investigations, observationsand specific recommendations. (ix) Proof checking of reports from reputed IIT's. (For instrumentation of 02span per bridge). Note: 1) Instrumentation To be done twice, FIRST Round will give the general picture &SECOND Round can be planned six months or one year later for reconfirmation of the results obtained in firstround, 2) Railway will provide suitable train formation with loaded wagon and block for instrumentation purpose | — | — | — | 1,57,61,804 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Strictimplementationoflabourlaws.pdf
ATTACHMENT
TD-upto-Acs-11.pdf
ATTACHMENT
Spl.conditionininstrumentationofSuperstructureofBridgeWCRCon_20.07.26.pdf
ATTACHMENT
BS-91GuidelinesforResidualFatigueLifeforSteelGirderBridges.pdf
ATTACHMENT
17_03_2026_AcceptanceoftheInstrumentationschemefinalReportforRailwayBridgesbyCBE.pdf
ATTACHMENT
Loss-ReducedofCamberinOWGRDSOLetterdt31072019240515.pdf
ATTACHMENT
SteelBridgeCodeIncorporatedUptoACS24.pdf
ATTACHMENT
BS106R2RDSOGuideline.pdf
ATTACHMENT
2026_06_16Acceptanceofe-BankGuaranteee-BGinWorksContractsandPGMS_PMS_PSSAGC1.pdf
ATTACHMENT
GCC-upto-Acs-11.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].