Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC 1010 NANDANPURA BABINA CANTT DIST JHANSI 284401 | BABINA CANTT | JHANSI | UTTAR PRADESH | 284401 | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹41.5 L+₹6.9 L (20.1%)Rejected-Finance 640 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UP | 284401 | L2 | Rejected-Finance Not being a
lowest
tenderer | |
| 3 | L3₹43.5 L+₹9.0 L (26.1%)Rejected-Finance NEAR PUMP HOUSE ROAD NEAR RED ROSE SCHOOL BABINA CANTT JHANSI DISTT UP 284401 | JHANSI | UTTAR PRADESH | 284001 | L3 | Rejected-Finance Not being a
lowest
tenderer |
Tender Value
₹46.8 L
EMD Value
₹93,700
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA CANTT 284401
CERTAIN MINOR WORK 1 NO SPECIAL REPAIR WORKs 2 NOS AND REVENUE WORK 1 NO IN AGE BR-I AND AGE EM UNDER GE BABINA
2022_MES_533960_1
GE/BAB/TOKEN/18 OF 2022-2023
Open Tender
Civil Works
Item Rate
184 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹93,700
Yes
10 Aug 2022
27 Jun 2022
28 Jul 2022
27 Jun 2022
26 Jul 2022
14 Jul 2022
Amount
Excavation in trenches not exe 1.5 mtrs wide and not exe 1.5 mtr in depth and getting out in any type of soil etc complete all as specified and directed .
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil comlete all as specified and directed.
Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.
Removing excavated soils/material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed.
M&L for moorum laid in layers n exc 15 cm thickness , spread ,levelled , rammed and watering as in floors etc complete and all as specified
M&L for hard core of broken boulders/stone of gauge n exc. 63 mm, deposited, spreading, leveling watering and well ramming to true surface in layers not exceeding 15 cm thick each layer complete all as specified and directed.
Demolition of brick work/stone masonary built in cement mortar of nay description , any position and any location and as direcetd
M&L for brick work with Fly Ash bricks ( FASB) straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) etc complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 4) as in half brick thick walls etc complete all as specified and as directed
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregates as in foundation filling etc complete all as specified and directed.
M & L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in bend , bed plates and for embedded hold fasts and similar including use and waste of form work where necessary complete all as specified and as directed. Note : Cost of form work shall deemed to be included in unit rate quoted by the tenderer
M&L for M-25 ( design Mix ) reinforced cement concrete as in foundations ,footings , plinth beams and bases of columns etc similar etc complete all as specified and directed. Note : Reinforcement to be measured and paid seperately
M&L for M-25 ( design Mix ) reinforced cement concrete as in columns , pillars / struts etc complete all as specified and directed. Note : Reinforcement to be measured separately and paid seperately
M&L for M-25 ( design Mix ) reinforced cement concrete as in chajja etc complete all as specified and directed. Note : Reinforcement shall be measured and paid seperately
M&L for M-25 ( Design Mix ) reinforced cement concrete as in roof beams , lintel beams etc complete all as specified and directed. Note : Reinforcement to be measured separately and paid seperately
M&L for M-25 ( design Mix ) reinforced cement concrete as in slab supported on walls , beams ,& columns etc complete all as specified and directed. Note : Reinforcement to be measured separately and paid seperately
M&L Form work to sides of concrete in foundations, footings of columns and plinth beams and similar work for rough finished flat surfaces of concrete complete.
M&L Form work to sides of columns , struts , posts and similar work , surfaces of concrete fair finished , flat etc complete all as specified and directed .
M&L Form work to soffits and sides of lintel beams /roof beams /roof slab and similar , surfaces of concrete fair finish etc complete all as specified and directed .
M&L Form work to soffits of roof slab and chajjas etc thickness n exc 200 mm thick , surfaces of concrete fair finish etc complete all as specified and directed .
M&L Form work to edges of concrete flats ,treads window cill ,floor or roofs n exc 20 cm wide and sides of RCC/ PCC band in walls and similar works exc 10 cm but nexc 20 cm wide etc complete all as specified and directed .
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed
Resuring or easing & adjusting incl taking down shutters of any description ( Steel/Wooden ) exc 1 Sqm but n exc 2 Sqm each ,cutting ,welding and refixing in same frame/chowkhat etc complete all as specified and as directed
Taking down shutters of any description exc 1 Sqm but n exc 2 sqm each etc complete all as specified and as directed
S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification, drawing and colour etc complete all as specified and as directed by EIC .
S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification & drawing etc complete all as specified and as directed.
S&F, Pressed steel frames for doors(125x60) mm using 1.25 mm thick mild sttel sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete incl providing PCC 1:3:6 Type C-1 using 20 mm graded stone aggregates and 1 No 10 mm dia deformed bar etc complete all as specified and directed . Note : The cost of PCC ,bottem bar 10 mm dia , hinges ( 6 Nos ) deemed to be included in unit rate quoted by the tenderer. Make : M/s Ishwar Industries, 175/A Bombay Bazar, Meerut Cantt, M/s Aswini & Sons, E-15, Patel Nagar-II Ghaziabad, M/s Agra Timber & steel products, Agra, M/s AGEW steel manufactures Pvt Ahmedabad, , M/s GS Udyog, G-11, Site III Panki, Kanpur, Poonam Enterprises, E-10 Industrial Estate, Talkatora, Lucknow
S&F, FACTORY MADE plain framed paneled shutter 35 mm thick IInd class HW (Two numbers panel) with lock rail and panel of 12 mm thick type AB , BWR grade , the size of rail and style as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated etc complete all as specified and as directed .
S&F, FACTORY MADE 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.24 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed.
S&F, FACTORY MADE 30 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.24 (b), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed.
S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm for PVC doors etc complete all as specified and as directed.
S&F, butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed
S&F, aluminum anodized barrel tower bolts of extruded section 200 mm long etc complete all as specified and as directed
S&F, in repair aluminum anodized barrel tower bolts of extruded section 150 mm long etc complete all as specified and as directed
S&F, aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed
S&F, in repair aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed
S&F, aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) 250 mm long , not less than 12 mm dia bolt with a minimum of 6 nos bolts and nuts on bolt plate and 2 nos on staple plate and fixed etc complete all as specified and as directed
S&F, in repair aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) 300 mm long , not less than 12 mm dia bolt with a minimum of 6 nos bolts and nuts on bolt plate and 2 nos on staple plate and fixed etc complete all as specified and as directed
S&F 300 mm, ordinary rat tail rod patttern springs includding roller and roller plate etc complete all as specified and as directed
S&F 150 mm size floor door stopper aluminium alloy body and fixed with screws etc complete all as specified and as directed
S&F in repair stainless steel ( H-304 grade ) curtain rod 25mm dia etc complete and as directed
S&F stainless steel round knob at both end of curtain rod of 25mm dia etc complete and as directed
S&F stainless steel bracket suiyable for curtain rod of 25mm dia and fixed in position on walls with wooden cleat/rawal plug as directed
M&L for mild steel TMT bars 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed .Make : As specified in tender documents
M&L for mild steel TMT bars 10 mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed . Make : As specified in tender documents
M&L for mild steel TMT bars 8 mm dia and including 10 mm dia as in stirupps , spacers and binders , cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. Make : As specified in tender documents
S &F mild steel hold faste , clamp and similar small articles made of flat iron 25x3 mm confirming to Fe 310-O etc complete and as directed Make : As specified in tender documents
Supply fabrication and fixing mild steel work Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete and as directed Make : As specified in tender documents
S&F galvanised mild steel wire clothe with 0.63 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed
S&F in repairs galvanised mild steel wire clothe with 0.63 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed
S&F CRC sheet box type steel window with steel handle ,steel peg stay etc complete with glazing bars dovetailed or welded all as specified and direcetd
S&F CRC sheet box type steel window with steel handle ,steel peg stay etc complete without glazing bars dovetailed or welded all as specified and direcetd
S&F FACTORY FABRICATED Steel ventilator top hung with hinges ,steel handle peg stay , glazing bars dovetailed or welded for receiving glass etc complete all as specified and as directed.
S&F CRC sheet box type steel ventilator side hung type with steel handle ,steel peg stay etc complete with glazing bars dovetailed or welded all as specified and directed
S&F CRC sheet box type steel ventilator side hung type with steel handle ,steel peg stay etc complete without glazing bars dovetailed or welded all as specified and directed
Taking out /Dismantling of existing roof treatment of any description , any position over roof including taking out plain cement concrete of any description to the thckness as directed etc complete and including lowering down complete waste materials to the ground on a place where directed and including removal of the same to a distance exc 250 mtr but n exc 500 mtr as directed .Note : The cost of lowering down and removal deemed included in unit rtae quoted by the tenderer.
M&L for cutting out cracks to V section in existing roof or terracing ,cleaning out ,wetting and sealed solidly with hot mixture of bitumen and dry sand in proportion of 1:1 by weight etc complete and as directed.
M&L for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove sealed with cement mortar 1:3 complete and as directed.
M&L for P.C.C 1:2:4 type B-1 using 20 mm graded stone aggregate as in padding laid to slope over roof and surface finished even and fair etc complete all as specified and as directed. Note : The thickness of PCC shall not be exceeded more than 75 mm at any place
M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping and on roof etc complete all as specified and as directed.
Supply only water roofing compound ( Liquid ) ISI marked etc complete and as directed
Roughening of existing /old concrete floors by picking ,sweeping clean and washing down with water to remove dust etc complete and as directed.
M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces of roof when concrete is still green mixed with water proofing compound ( Liquid) @ 200 ml per bag of cement of 50 kgs , surface finished even and fair enough to receive water proofing traetment etc complete all as specified and as directed. Note : WPC shall be measured and paid seperately
M&L for providing water proofing treatment over roof by applying the following operations :- (a) Preparation of plastered surface by cleaning with water and leave the sufaces till to become surface total dry . (b) Applying first coat of bitumen primer conforming to IS-3384 @ 0.4Kg / Sqm on plastered surface (c) Applying APP based polymeric membrane 3mm thick (Minimum thickness) and weight not less than 3kg/Sqm , reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over on primed surface laid with 100mm side lap/end lap on prepared surfaces as per manufacturers instructions and under strict supervision of manufacturer's tenchnical representative etc and applying two coats of bituminous based aluminum paint @ 100 ml/sqm each coat etc complete and as directed. Note : Testing of APP membrane is mandatory and contractor will not be allowed to carry out the work untill results are obtained and found satisfactory .Cost of testing of 3 nos samples deemed to be included in unit rate quoted by thetendrer and nothing extra on this account will be admissible . (ii) The cost of casting one cement plate of size 600 mm x 450 mm , 10 mm thick rendering in CM 1:3 in each building incl writing materials shall deemed to be included in the unit rate quoted by the tenderer.
M&L for 75 mm thick P.C.C 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in alternate panels made of 10 mm thick plywood ( Size of each panel shall not exceed 12 Sqm ) and finish the surface even and smooth without using extra cement including filling of joint with bitumen mastic ( 1 part bitumen mixed with 3 part dry sand) etc complete all as specified and as directed. Note : Cost of form work for forming joints and jointing materials deemed to be included in unit rate quoted by the tenderer.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectengular) DARK ( Premium Quality ) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 over 25 mm thick PCC in 1:2:4 type B-0 using 12.5 mm graded stone aggregates etc complete all as specied and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectengular) DARK ( Premium Quality ) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 etc complete all as specied and directed.
M&L glazed ceramic coloured tiles DARK ( Premium Quality ) 7 to 8 mm thick ( square or rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm over 15 mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed .
M&L glazed ceramic coloured tiles DARK ( Premium Quality ) 7 to 8 mm thick of size 300x450 mm JOINT FREE over 10 mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed .
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete all as specified.
M & L for 15 mm thick rendering in cement mortar 1: 6 on fair faces of brick work or concrete surfaces , surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for 15 mm thick rendering in cement mortar 1: 6 on other than fair faces of brick work or stone masonary , surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for 15 mm thick rendering in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for 5 mm thick rendering in cement mortar 1:3 on ceiling , surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for 15 mm thick rendering in cement mortar 1: 4 on fair face of brick work or concrete surfaces, mixed with WPC , surface finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid seperately
M & L for 10 mm thick rendering in cement mortar 1: 6 on air face of brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for extra over plaster as in drip mould n exc 15 cm wdth or girth in CM 1:4 .
M & L for applying two coat of oil bound distemper over a coat of primer over a coat of chalk whitening on walls including preparation of surfaces all as specified and directed.
M & L for applying two coat of cement basded paint over a coat of alkali resistance primer on walls including preparation of surfaces all as specified and directed.
M & L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of 1 mm thick White putty over a coat of primer on walls all as specified and directed.
M & L for complete removal of existing treatment from walls and appying two coat of cement base paint over a coat of primer over a coat of 1 mm thcik wall care putty including necessary prepration of surface complete all as specified and as directed.
M&L for preparing new surfaces of wood /wood based materials of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paints over a coat of wood primer all as specified .
M&L for preparing new surfaces of steel of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paints over one coat of red oxide primer all as specified.
S&F 3 mm thick plain sheet glass ordinary quality , glazing with wooden beads or oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as dirrected.
S&F in repair 3 mm thick plain sheet glass ordinary quality , glazing with wooden beads or oil putty in square n. exc 0.5 sqm in each pane complete including hacking out old broken glass from any location and from any type of member wooden/steel frame etc all as specified and as dirrected.
S&F 110 mm bore ( SWR) pipe single socketed in any length with rubber ring joints fixed to walls with MS clamp made of flat iron 30x5 mm incl nut washers and bolt grouted in wall with PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregates etc complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or on floors etc complete and as directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or on floors 75 mm bore etc complete and as directed.
S&F PVC (SWR) bends any radius 75 mm bore etc complete
S&F PVC (SWR) bends any radius 110 mm bore etc complete
S&F PVC (SWR) Cowl 110 mm bore etc complete
S&F PVC (SWR) junction single, (single T) equal or unequal 75 mm bore with access door etc complete .
S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door etc complete .
S&F PVC floor trap size 75mm dia out let with grating including connection to waste pipe with solvent cement jointing including taking down existing trap complete all as specified and directed
S&F Salt glazed stoneware gully trap of size 150x150 mm with trap fixed in cement mortar jointing etc complete all as specified and directed
Taking up or down existing steel tubing and connections including cleaning for refixing etc complete all as specified and as directed for 15 mm bore
Taking up or down existing steel tubing and connections including cleaning for refixing etc complete all as specified and as directed for 20 mm bore
Supplying, fixing, jointing and testing 15 mm dia galvanised iron tubing medium grade ISI Marked with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
Supplying, fixing, jointing and testing 20 mm dia galvanised iron tubing medium grade ISI Marked with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
Refixing only 15 mm dia galvanised iron tubing medium grade obtained from taking down including necessary cleaning incl providing new all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
Refixing only 20 mm dia galvanised iron tubing medium grade obtained from taking down including necessary cleaning incl providing new all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
Taking down old existing unserviceable tank PVC ( HDPE) and of capacity exc250 ltrs but n exc 500 ltrs complete as direcetd
Taking down old existing unserviceable tank PVC ( HDPE) and of capacity exc 500 ltrs but n exc 1000 ltrs complete as direcetd
Disconnecting of existing water storage tank of capacity exc 250 ltrs but n exc 1000 ltrs each and setting aside ( or lowering down from roof ) for carrying out repair works on roofs and hoisting reconnecting and re fixng in position etc complete as direcetd
S&F 500 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.
S&F 1000 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.
S & F ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe 20 mm dia and fixed in new tank (minimum weight 20mm 210 gm) complete all as specified.
S&F 20 mm gun metal gate valve ( ISI Marked ) with iron wheel head screwed both ends for iron pipe etc complete as directed.
S&F in repair 20 mm gun metal gate valve ( ISI Marked ) with iron wheel head screwed both ends for iron pipe etc complete as directed.
S&F vitreous china squatting pan 'ORISSA PATTERN size 580 mmx 440 mm , WHITE with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed
S & F 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white model of Hindware with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.
S&F vitreous china wash hand basin, white flat back, size 550mmx400mm incl CI bracket , fitting waste coupling CP cast copper alloy and including fixing of tap ,waste fitting and union complete all as specified and as directed .
S & F Vitreous China bowl urinal flat back small of size 465x355x265 mm with grating and union for discharge pipe, push tap and including Vit China autometic flushing cistern 5 Ltrs capacity etc complete all as specified and directed .
S&F 15mm bore FANCY type chromium plated bib cock with AERATOR , long body with wall flange etc complete all as specified and as directed
S&F 15mm bore angle cock cast copper alloy copper alloy , CP , screwed down high pressure with crutch or butterfly handle screwed both ends fixed to GI tubing/fitting etc complete all as specified and as directed.
S&F 15 in repairs mm bore stop cock cast copper alloy CP , concealed with wall flange , screwed down,high pressure ,with crutch or butterfly handle screwed both ends fixed to GI tubing/fitting etc complete all as specified and as directed.
S&F 15 in repairs mm bore stop cock long threaded cast copper alloy CP , concealed with wall flange , screwed down,high pressure ,with crutch or butterfly handle screwed both ends fixed to GI tubing/fitting etc complete all as specified and as directed.
Supply only 15 mm bore Pillar tap ,cast copper alloy , chromium plated , Fancy type with capstan heads screwed down high pressure with or without lettered HOT or Cold with long shank and flynut ,screwed for iron pipe and fixed etc complete all as specified and as directed.
S&F Shower rose brass chromium plated , 125 mm size with tilting arm 200 mm long FANCY type including fixing to steel pipe or union complete all as specified and as directed.
S&F corner glass shelf 200 mm radius with SS railing and ABS brackets and fixed on walls with bracket fixed on wall etc complete all as specified and as directed.
S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60 Cm long between flanges ETC complete all as specified and directed.
S&F PVC ( LDPE) waste pipe 32 mm dia of pressure rating 6 kg/cm2 suitable for WHB /Sink etc complete and as directed.
S&F PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed .
Supplying & laying, jointing and testing salt glazed stone ware drain pipe grade ‘A’ ( ISI Marked ) laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed for the 200 mm Internal dia of pipe
M & L for 150 mm thick concrete bed and including haunching against side of pipe after they are laid and tested in cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate for 200 mm Internal dia of pipe
S&F 3 mm thick pin headed figured glass , glazing with wooden beads or oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as dirrected
M & L for CONCEALED point wiring one light point controlled by one switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 Sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including non metelic rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.6 mm thick) including earth dolly with frame plates with matching cover plates all modules including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed .NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the conduit to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size as directed fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick ISI marked hylam sheet/ backlite sheet cover fixed with suitable brass screws and cup washers
All as per Srl item No. 129 above but one fan point controlled by one switch & regulator.
All as per Srl item No.129 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.
All as per Srl item No.129 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
Description all as per item No 129 above but for power point wiring using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed.
S & F switch piano flush button type 10 Amp, single pole ,one way , AC ,230 Volts , 50 Hz complete all as specified and as directed.
S & F switch bell push button type 5 Amp, single pole AC 230 Volts 50 Hz complete all as specified and as directed. Make : Anchor, Cona , Leader, KAY, SSK, Finolex, Havells
S&F socket outlet 2in 1 , 3 pin , 10 Amp , AC , 230 Volts , 50 Hz complete all as specified and as directed.
S & F switch piano flush button type 20 Amp, single pole, one way ,AC ,230 Volts ,50 Hz complete all as specified and as directed.
S & F delux fan Regulator rotary, step type , AC ,240 Volts ,50 Hz complete all as specified as directed.
S & F Lamp holder,PVC/Urea type with back plate ,AC ,230 Volts ,50 Hz , ISI marked suitable for batten fittings complete all as specified as directed
S&F ceiling rose,surface bakelite 65 x50mm three brass terminals, AC ,230 Volts ,50 Hz ISI marked complete all as specified and as directed.
S & F 9/10W LED retrofit Ball lamp holder base B-22, bipin type AC 230 Volts 50 Hz with PF not less than 0.95 with polycorbonate body and aluminium heat sink complete all as specified as directed.
S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100Amp rated bus bar 8 ways 240 V complete all as specified and as directed.
S&F MCB single pole and neutral 40 Amp 240 V ,10KA , 'C' series, ISI marked complete all as specified and as directed with copper lugs.
S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, ISI marked complete all as specified and as directed with copper lugs.
S&F in repairs 20 W LED ,6000k decorative ultra slim linear fitting , extruded aluminium , environmental friendly, energy efficient incl 20 W lamp fitted incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed.
S&F ceiling fan 1200mm sweep AC single phase 230 volts BEE rating connecting with flexible cable 3 core copper conductor of size 23.0/0076 of suitable length from celling rose complete all necessary arrangement of hanging of celling fan (GI Pipe hook etc) as specified and as directed.
S & F Exhaust fan, AC , singe phase , 230/240 Volts , 300 mm sweep , noiseless light-weight rust proof steel body self closing louvers and blades, speed 1400 complete with all arrangement of making hole complete all as specified and as directed.
S&F in replacement new generation security light fitting 1 X 45 W LED , envoirnmental friendly long life , made up of of innovative die cast aluminium housing with high power LED as light source with IP 66 protection , power consumption 45 watt complete input voltage of 150 -240 Volt ( nominal rated voltage 240 volt) including electric connection with 1.5 sqmm 3 core PVC insulated and PVC sheathed cable stranded Copper conductor from junction box to security light etc complete as specified and as directed.
Supplying and laying 1100 volt grade heavy duty ISI marked cable PVC insulated strandrad aluminium conductoe wire one twin core cable flat or circular of size 6 sqmm to be connected to MCB box /Main switch etc etc complete all as directed.
S&F house service GI bracket GI tubing 40 mm dia , medium grade 3.00 mtr long and bend at 90 degree angle including mild steel flat iron 40 mm x 6 mm with nut, bolts, washers , stay and guys complete as specified and as directed.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weight n less than 17.25 kgs buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT I ( 2009) with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
M/s Ravi Traders
M/S Ritu Tandon
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .