Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC PLOT NO 79 SIS PARK DICHAON ENCLAVE PP2914 NAJAFGARH SOUTH WEST DELHI NEW DELHI 110043 | WEST DELHI | DELHI | 110043 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹33.6 L+₹61,477.50 (1.87%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹36.1 L+₹3.1 L (9.47%)Rejected-Finance NIVADA TIVAYA ROAD TIVYA MUST BUS STOP VILLAGE KHATAULI SAHARANPUR UP 247001 | SAHARANPUR | SAHARANPUR | UP | 247001 | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹36.1 L+₹3.2 L (9.60%)Rejected-Finance H NO 82C BLOCK CC SHALIMAR BAGH DELHI 110088 | DELHI | NORTH WEST DELHI | DELHI | 110088 | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹40.6 L+₹7.6 L (23.2%)Rejected-Finance | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹48.1 L
EMD Value
₹96,200
Closing Date
26 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt-10
GE South Delhi Cantt-10
SPL REPAIR TO SEWAGE LINE AT VRC OF IHQ OF MoD (ARMY) CAMP AND CERTAIN MINOR WORKS UNDER AGE B/R-I OF GE (SOUTH) DELHI CANTT-10
2023_MES_609130_2
GE/DS-52/2023-24
Open Tender
Civil Works
Item Rate
120 days
GE South Delhi Cantt
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹96,200
Yes
5 Oct 2023
4 Aug 2023
28 Aug 2023
4 Aug 2023
26 Aug 2023
12 Aug 2023
Amount
Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar complete all as specifed and as directed.
Demolition of mud in roof, any thickness, including plastering and leeping and disposal off the mud and dubries out side MOD land complete all as specifed and as directed.
M&L for 40 mm thick (average thickness) plain cement concrete 1:2:4, type B-0, using 12.5 mm graded stoen aggregate as in roof, padding to maintain the uniform slope complete all as specifed and as directed.
M&L for rendering 10 mm thick (average) plaster on concrete surfaces in CM (1:4) on roof, mixed with liquid water proofing compound and finishing the surface even and smooth without using extra cement complete all as specifed and as directed. Note :- Liquid Water proofing compound willl be mixed as per manufacturing instrution and paid seperately.
M&L for Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specifed and as directed:-
a) Applying oil bound bituminous primer at the rate of 0.4 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated.
b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35).
(c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface
(d) Applying one coat of hot straight run bitumen grade 30/40 (Grade S-35) conforming to IS-73 @ 1.20 kg/Sqm. Make: "Moply FP" manufactured by STP Texsa Ltd or Hyper Plas (Polyester) manufactured by M/S IWL Ltd or "Shaliplas"ter) manufactured by M/S Capital Steels and Chemical Pvt Ltd or Makpolyplast manufactured by M/S M K Patro as approved by GE. Note :- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectivenss of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or inlieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.
M&L for cement concrete tiles 30cmx30cmx22mm thick laid over and including 15 mm thick screed in cement mortar 1:6 and jointed grouted and pointed in CM 1:3. complete all as specifed and as directed.
M&L for Providing cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast, on edge including necessary form work complete all as specifed and as directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specifed and as directed.
M&L for rendering with readymix plaster 15mm thick (external walls) on fair faces of brick work or concrete surfaces finished even and smooth complete all as per manufacturer's instructions complete all as specifed and as directed. Notes:- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast/Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE. 2. The readymix plaster shall be procured directly from the manufacturer or from their authorised dealer. 3 The contractor shall produce original purchase voucher of readymix plaster while claiming RAR/ Final Bill.
Disconnecting existing tanks, exc 500ltr and n exc 1000 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specifed and as directed. Note :Cleaning repairing etc. measured separately.
Disconnecting existing tanks, exc 250 ltr and n exc 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specifed and as directed. Note: Cleaning repairing etc. measured separately.
M&L for cutting holes into or through brick wall bult in cement mortar or cement lime mortar and stone walls n.exc 150 sq.cm including making good to the original surface complete all as specifed and as directed.
M&L for cutting chases, pining in making good to facing where required and pinting in cement to , cutting not exc 10cm girth in brick walls complete all as specifed and as directed.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specifed and as directed.
S&F Pre-printed galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw/ L-type or J type cranked hook complete all as specifed and as directed.
S&F Structural Steel of grade Fe- 410 Grade E-250 quality -Bl, in roof, purlins crane of angle or other section gusset plates, Flat Iron rails braces etc, drilled for fixing, and other covering etc. to be prepared for hanging and sliding with and including either hooks and hinges and other covering running rails and guides and hanging also fastening and fixing complete all as specifed and as directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces of any description over 10 cm in width or grith, not otherwise described including preparation of surfaces complete all as specifed and as directed.
Excavation in trenches n.exc 1.5 m wide & n exc 1,.5 m in depth for foundation etc in hard/dense soil complete all as specifed and as directed.
M&L for 100 mm thick cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate in sub base complete all as specifed and as directed.
M&L for machine pressed pre cast concrete inter locking paver block 80 mm thick M-35 grade with grey cement and pigment & glossy finished any shape colour, size complete all as specifed and as directed.
M&L for sand cushioning under layer of floor etc. complete all as specifed and as directed.
Removing of excavated material n.exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specifed and as directed.
M&L for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specifed and as directed.
M&L for renderning 15 mm thick in CM 1:4 mixed with WPC on any faces of brick/concrete surfaces finished even and fair with out using extra cement complete all as specifed and as directed. Note: WPC shall be mixed as per manufacturar instructions and shall be measured and paid seperately.
M&L for preparation for applying two coat of Premium acrylic emulsion paint having VOC less than 50 gm/littre and UV resistence as per IS 15489 : 2004, Alkali fungal resistence dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specifed and as directed.
Excavating in post holes in soft loose soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specifed and as directed.
Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out complete all as specifed and as directed.
M&L for 75 mm thick plain cement concrete 1:3:6, type C-2, using 40 mm graded stone aggregate as in sub base of floor/plinth proctions etc finished surface fair & even complete all as specifed and as directed.
M&L for cement concrete 1:2:4, type B-2, using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specifed and as directed.
S&F rolled mild steel work as in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for escuring wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to Gde Fe 410-0 or Fe 310-0 complete all as specifed and as directed.
S&F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W, with gusset plates, rails braces, etc., drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specifed and as directed.
S&F mild steel screw bolts (machine cut) with hexagonal or square heads at one end and screwed the outher or screwed both ends, each screwed end to be fitted with washers and one heragonal or square exc 5 cm but n.exc 10 cm long and 12 mm dia 75 mm long etc. complete all as specifed and as directed.
S&F Mild steel round bar 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hopping for colours hooking ends and binding with a including security bolts post and struts in fencing including cutting top to shape as directed drilling holes notching for wire etc. complete all as specifed and as directed.
M&L for preparation of surfaces of any description n.exc 10 cm in width or girth when unconnected with outher painting or when painted in a different tint etc. complete all as specifed and as directed.
S&F chain link MS galvanised fencing 50 mm Square mesh with 10 gauges incl line wires any mesh size & type to any type of standards rails straining bolts etc. incl provision of binding wire complete all as specifed and as directed.
Excavation in trenches in soft loose soil not exceeding 1.50m wide and not exceeding 1.50m in depth for manholes & sewage lines and getting out in soft/loose soil complete all as specifed and as directed.
All as per Srl item No.36 above, but depth exceeding 1.50m and n.exc 3.00m.
De-silting of sewer line upto 450 mm internal dia with connected manholes of any depth by mechanical device like super sucker machine, high pressure jetting machine/gantry machine. incl taking out debris, installation of adequate number of over pumping system leak proof stanching arrangement of upstream and downstream side of working length, temporary raising main etc for smooth flow of sewage system to avoid flood in the area. Supply of all material, labour, tool & plants temporary power connection with stand by generator set of capacity of at least 62.5 KVA, gas detector for air ventilators etc & provn of safety equipments as per guide lines laid in IS : 11972 (1987)/(international standard), traffic control arrangement and proper lighting at night barricading display of sign boards, insurances of workmen & cleaning of site complete all as specifed and as directed. Note - : The sewage treatment main line cleaning shall be done as per direction of Engr-in-Charge, The rate deemed to be included for the cleaning of STP line any places other than mentioned block as New or Old VRC.
All as per Srl item No.38 above, but upto 600 mm internal dia of sewage lines.
Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 200 mm complete all as specifed and as directed.
Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 450 mm complete all as specifed and as directed.
Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 600 mm complete all as specifed and as directed.
M&L for concrete bed to 200 mm bore drain pipes in cement concrete 1:3:6, type C-2, using 40 mm graded stone aggregates including packing under and haunching against the sides of pipes after they are laid and tested complete all as specifed and as directed.
All as per Srl item No.43 above, but bore of pipe 450 mm.
All as per Srl item No 43 here-in-before, but bore of pipe 600 mm.
M&L for providing reinforced concrete pipes, class NP2 laid and jointed complete with collars 200 mm dia (internal) laid in trenches & jointed etc. complete all as specifed and as directed.
M&L for providing reinforced concrete pipes, class NP2 laid and jointed complete with collars 450 mm dia (internal) laid in trenches & jointed etc. complete all as specifed and as directed.
M&L for providing reinforced concrete pipes, class NP2 laid and jointed complete with collars 600 mm dia (internal) laid in trenches & jointed etc. complete all as specifed and as directed.
Demolition of brick wok built in cement mortar complete all as specifed and as directed.
Cutting into existing manholes for connecting new drains of 225 mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or 3/4 Section) in cement concrete 1:2:4, type B-1, smooth finished and reforming benching as required complete all as specifed and as directed.
All as per Srl item No.50 above, but for box of pipe 475 mm.
Taking down Cement plaster, any discription on brick/Block or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specifed and as directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth (without using extra lime cement complete all as specifed and as directed.
Demolition of cement concrete (reinforced) of any description and any thickness complete all as specifed and as directed.
M&L in repairs cast iron Nahani trap with grating including jointing to waste pipe, fixed in cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate, dia of outlet 75 mm complete all as specifed and as directed.
S&F SFRC manhole cover size 600mm dia x 70mm thick with frame set in cement mortar 1:4 complete all as specifed and as directed.
S&F SFRC manhole cover size 750mm x 750mm x 65mm thick with frame set in cement mortar 1:4 complete all as specified and as directed.
S&F steel fibre reinforced (SFRC) Gully trap cover with frames of size 300mm x 300mm x 50mm thick set in cement motar (1:6) complete all as specifed and as directed. Notes for Srl item Nos.56 to 58: - (i) Make of SFRC Manhole/drain cover:- (a) M/s PS Concrete. (b) M/s KK Manhole. (c) BRHL Concrete Industries.
Taking down rain water pipe (any size) or pattern incl all fittings, head shoes, bends swan necks etc. (measured overall as fixed along the centre line over fittings and accessories complete all as specifed and as directed.
S&F PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to walls/floor of 110 mm dia complete all as specifed and as directed.
S&F PVC (SWR) bends any radius 110 mm dia complete all as specifed and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends etc. complete all as specifed and as directed.
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm complete all as specifed and as directed.
Dewatering/desilting of area drainage system and man holes etc cleaning of all sludge,silt residue of both organic and inorganice nature by manual labour or mechnical scrappers etc and disposal of the same out side the defence land incl taking down the drain cover and after cleaning/desilting the same to be fixed on the drain, dumping the material to any depth complete all as specifed and as directed.
Surface excavation in soft loose soil by manually method back side of blocks n.exc (not exceeding) 30 cm deep a and getting out including removing excavated material distance exceeding 3 KM and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specifed and as directed. Note - : Excavation work shall be done by manual, No any Machinery use while surface excavation due to laying of existing following lines. Electric cable, sewage braches lines, extenal water supply pipe line etc.
Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specifed and as directed.
Cutting of trees including cutting of trunk n.exc 30 cm girth and branches and digging out roots from floor, roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specifed and as directed.
Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender
H S KALSI AND BROS
Chaudhary Constructions
YP INFRA
MAA BHAWANI CONSTRUCTION
P R Constructions
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .