Renovation and Interior Fit-Out Works of SIDBI Office, Kolkata

Sr.No Description DSR Amount Non- DSR Amount

1 Civil & Interior Work 21,58,668.00 26,66,893.13

2 Electrical Work 10,70,036.00 571577.00

5 Fire Fighting Work 4,42,535.00 57741.00

6 CCTV Work 140400.00

7 Furniture Work 2759360

9 Lighting Work 1,47,620.00

10 Signage 102000

11 Total Amount i/c GST 60,57,242.00 68,65,025.47

11 Total Amount i/c GST 60,57,242.00 68,65,025.47

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CIVIL WORKS

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

DSR RATE NON DSR

1.00 DISMANTLING & DEMOLISHING

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed

glazing and false ceiling including disposal of unserviceable material

and stacking of serviceable material with in 50 meters lead as directed

by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled

or waste materials by mechanical means, including loading,

1.02 15.60 transporting, unloading to approved municipal dumping ground or as Cum 70 263.95 18476.50

approved by Engineer-in-charge, beyond 50 m initial lead, for all leads

including all lifts involved.

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting

with 15 micron anodising In Natural Finish. Thickness 1.30 to 1.50mm.

Designed to conceal screws. Seamless finish. Complete with Rubber/

PVC Jointers and Gasket.

LUXURY VINYL TILE( LVT) Supplying and fixing of 3 mm Luxury vinyl

2.02 MR flooring Top layer of approved design & Pattern as per architects sqm 150.00 1650.00 2,47,500.00

approval & Instructions

CARPET TILES: Providing and laying carpet tile flooring. Carpets shall be

of loop pile carpet tiles/Plank. The carpet shall have sufficient gauge

(1/10 ~ 1/12) with sufficient stitches (10~13) per inch. The carpet shall be

2.03 MR solution dyed fibre content or with injection printing technology. The sqm 50.00 1650.00 82,500.00

carpet shall have the pile height ranging from (2.0 ~ 3.0) mm with

average density higher than 4500 Oz/ cubic yard. The total

thickness of the carpet tile shall also range from (5 mm)

Digitally signed by AMIT

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

LAMINATED WOODEN FLOORING Providing and laying 8.3mm thick AC5

grade laminate wooden flooring having good castor chair and furniture

resistance strength. Plank dimension to be 1215x195x8.3mm with valinge clock

locking system and wax coating for better sound resistance. Impact and

abrasion resistance to be of high grade having class EN 13329. The flooring

2.04 MR shall be laid with 2mm thick underlay and PVC sheet and prevent against sqm 40 1770 70800

moisture and foot taping sound. The item also includes the skirting and any

other profiles required for proper installation.or its equivalent specifications or

as per the selection of client and items shall be complete in all respects. or its

equivalent specifications/ size as per the site requirement or as per the

selection of client and items shall be complete in all respects.

Providing and laying Vitrified tiles in floor in different sizes (thickness to

be specified by the manufacturer) with water absorption less than

0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on 20

mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with

2.04 11.41A grey cement slurry @3.3 kg/sqm including

grouting the joints with white cement and matching pigments etc. The

tiles must be cut with the zero chipping diamond cutter only . Laying of

tiles will be done with the notch trowel, plier, wedge, clips of required

thickness, leveling system and rubber mallet for placing the tiles gently

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size Sqm 160.00 1797.30 287568.00

11.41A.3.2 Size of Tile 600 x 1200 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade

(0.10 kg of hardener and 0.20 kg of resin per kg), including filling /

grouting and finishing complete as per direction of Engineer-in-charge.

2 FALSE CEILING WORKS

Digitally signed by AMIT

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all

height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with

zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with

flanges of 27 mm and 37mm, at 1200 mm centre to centre, one

flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm

long with 6mm dia bolts, other flange of cleat fixed to the angle

hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate

G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre

to centre, to which the ceiling section 0.5 mm thick bottom wedge of

80 mm with tapered flanges of 26 mm each having lips of 10.5

2.01 12.45 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having flanges of

20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition

with the help of rawl plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall screws of size

3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended

jointing compound , jointing tapes , finishing with jointing compound in

3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification

and also including the cost of making openings for light fittings,

12.5mm thick tapered edge gypsum plain board conforming to IS: 2095-

(Part I) :2011 (Board with BIS certification marks)

Digitally signed by AMIT

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

Providing and fixing mineral fibre false ceiling tiles at all heights of size

595X595mm of approved texture, design and pattern. The tiles should

have Humidity Resistance (RH) of 99%, Light Reflectance ≥

85%,Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as

per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-

Grid of hot dipped all round galvanized iron section of 0.33 mm thick

level suspended on interlocking T-Grid of hot dipped all round

galvanized iron section of 0.33 mm thick5x32mm of length 1200 mm

and secondary intermediate cross T of size 15x32 mm of length 600 mm

to form grid module of size 600x600 mm suspended from ceiling using

galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer

diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod

up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm,

spaced at 1200 mmcentre to centre along main ‘T’. The system should

rest on periphery walls /partitions with the help of GI perimeter wall

angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed

to the wall with help of plastic rawl plug at 450 mm centre to centre &

40 mm long dry wall S.S. screws. The exposed bottom portion of all T-

sections used in false ceiling support system shall be pre-painted with

polyester baked paint, for all heights. The work shall be carried out as

per specifications, drawings and as per directions of the engineer-in-

With 20 mm thick beveled tegular mineral fibre false ceiling

3 PARTITIONS AND WALL CLADDING

Digitally signed by AMIT

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

WALL PANELING :-Providing and fixing Paneling upto ceiling height

consisting of Aluminium frame and required board, frame work made

of Aluminium section made of 50x25 mm , consisting of floor and

ceiling channel 50mm wide having equal flanges of 25 mm and 0.50

mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre

to centre with dash fastener of 12.5 mm dia meter 50 mm length or

suitable anchor fastener or metal screws with nylon plugs and the

studs 48 mm wide having one flange of 34 mm and other flange 36

mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling

channel and placed at a spacing of 610 mm centre to centre by 6

mm dia bolts and nuts, including fixing of studs along both ends of

partition fixed flush to wall with suitable anchor fastener or metal screws

with nylon plugs at spacing of 450 mm centre to centre, and fixing of

boards to both side of frame work by 25 mm long dry wall screws on

studs, floor and ceiling channels at the spacing of 300 mm centre to

centre. The boards are to be fixed to the frame work with joints

staggered to avoid through cracks, M.S. fixing channel of 99 mm

width (0.9 mm thick having two flanges of 9.5 mm each) to be provided

at the horizontal joints of two boards, fixed to the studs using metal to

metal flat head screws, including jointing and finishing to a flush

finish with recommended jointing compound, jointing tape, angle

beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher as per

manufacture's specification and direction of engineer in charge all

complete.(Cost of Aluminium framing 600X600mm Paid saperately)

Paneling with 12 mm thick HDHMR board to IS: 5509 sqm 100.00 2,414.28 241428.0959

Digitally signed by AMIT

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

WALL PARTITION-Providing and fixing partition upto ceiling height

consisting of Aluminium frame and required board, frame work made

of Aluminium section made of 50x25 mm , consisting of floor and

ceiling channel 50mm wide having equal flanges of 25 mm and 0.50

mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre

to centre with dash fastener of 12.5 mm dia meter 50 mm length or

suitable anchor fastener or metal screws with nylon plugs and the

studs 48 mm wide having one flange of 34 mm and other flange 36

mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling

channel and placed at a spacing of 610 mm centre to centre by 6

mm dia bolts and nuts, including fixing of studs along both ends of

partition fixed flush to wall with suitable anchor fastener or metal screws

with nylon plugs at spacing of 450 mm centre to centre, and fixing of

boards to both side of frame work by 25 mm long dry wall screws on

studs, floor and ceiling channels at the spacing of 300 mm centre to

centre. The boards are to be fixed to the frame work with joints

staggered to avoid through cracks, M.S. fixing channel of 99 mm

width (0.9 mm thick having two flanges of 9.5 mm each) to be provided

at the horizontal joints of two boards, fixed to the studs using metal to

metal flat head screws, including jointing and finishing to a flush

finish with recommended jointing compound, jointing tape, angle

beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher as per

manufacture's specification and direction of engineer in charge all

Both side 12 mm thick HDHMR board to IS: 5509 sqm 220.00 3970.12 873426.4

LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick

MDF, on an existing Plywood surface.

Providing and fixing 12mm thick frameless toughened glass

door shutter of approved brand and manufacture, including providing

and fixing top & bottom pivot & double acting hydraulic floor spring

type fixing arrangement and making necessary holes etc. for fixing

required door fittings, all complete as per direction of Engineer in

charge (Door handle, lock and stopper etc. to be paid separately)

Providing wood work in frames of doors, windows, clerestory windows

and other frames, wrought framed and fixed in position with hold fast

lugs or with dash fasteners of required dia & length (hold fast lugs

or dash fastener shall be paid for separately).

Digitally signed by AMIT

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

9.1.1 Second class teak wood cum 0.5 142949.7 71474.85

INSULATION- Providing and fixing thermal insulation with Resin Bonded

rock wool conforming to IS: 8183, having density 48 kg/m3,50 mm

12.62 thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh screw, sqm 70 322.50 22575.00

rawel plug & washers and held and in position by criss cossing GI wire

etc. complete as per directions of Engineer-in-Charge.

Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type, core of block board construction with

9.21 frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on both

faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

Providing and fixing aluminium extruded section body tubular type

universal HS 3000 Slimline Concealed Door Closer (having brand logo

MR with ISi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 each 5 1,850.00 9,250.00

kg and door widthfrom 701 mm to 1000 mm), with double speed

adjustment with necessary accessories and screws etc. complete

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI

9.97 marked, anodised (anodic AC 10 as per IS : 1868 ), transparent or dyed -

to required colour or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging

type floor door stopper with necessary screws, etc. complete.

MORTICE LOCK AND LEVER HANDLES- Providing and installing

Tubular Handle TH 123 with Roses & Escutcheon in SS packaged with

Mortice lockset 55mm backset, 20 SS forend, SS strike plate and EP

Cylinder for all flush doors.

Providing and Fixing ESDH 22x450 mm D-type Handle Material : Stainless

MR Steel. Finish : Satin Stainless Steel (SSS). of approved make and model all EACH 11 4,870.00 53,570.00

complete as per the direction of Engineer-in-charge.

Providing and fixing minimium 100 kg capacity floor spring for Doors

approved make and designs as per engineer in charge

Providing and fixing Glass door lock approved make and designs as

per engineer in charge

Digitally signed by AMIT

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

Providing and applying plaster of paris putty of 2 mm thickness

13.26 over plastered surface to prepare the surface even and smooth sqm 300 262.70 78810.00

Wall painting with premium acrylic emulsion paint of interior

grade, having VOC (Volatile Organic Compound ) content less than 50

grams/ litre of approved brand and manufacture, including applying

additional coats wherever required to achieve even shade and colour.

Applying priming coats with primer of approved brand and

manufacture, having low VOC (Volatile Organic Compound ) content.

With ready mixed pink or grey primer on wood work (hard and soft

wood) having VOC content less than 50 grams/ litre

BLINDS Providing & supplying of Window Blinds as per the

approved sample in required shade and style consisting, of ZEBRA

BLINDS comprising of optima screen Fabric comprising of 22% polyester,

78% PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67

mm, Yarn count 18- 19/cm, having fire resistance standard – NFPA 701-

89 small testing ISO- 5659-2 .Thetear resistance should be complying to

ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of

clutch for quick, easy and safe installation, moulded plastic with steel

spring support and inserted into the tube end. It shall be driven by a ball

chain pulley with ball chain and can be positioned at right side or left

hand side of the Shade. The Shade when lowering or raising, shall be

automatically locked in position upon release of the ball chain by

means of a built in friction lock.Universal clutch for left and right hand

operation.Chain Gear Ratio of 1.75:1. The END PLUG shall be molded of

plastic witha steel location pin.The plug shall be inserted into the tube

end.(Opposite to the Drive Unit) for ease of installation. The SUPPORT

BRACKETS shall be of coated steel & provided with covers and used in

right hand or left hand positions differentiated by the acceptance of

the of the rectangular drive unit support or the round idler plug pin.Can

beinstalled (a) On Face (b) Ceiling Mount (c) On Frame

(d) in Recess. The Bracket should be protruding outside maximum

80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm

internal diameter & skin thickness of 1mm and shall incorporate a key

way integral with the tube to accommodate the spline. The BOTTOM

RAIL shall be a Flat Bottom made up of powder coated steel. The BALL

Digitally signed by AMIT

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over

M.R. glass surface as approval of the Architect. (Only film surface area sqm 45 1,650.00 74250

shall be measured and paid).

Cabinet Shutters out of 19mm Commercial Plybaord finished in 1mm

Laminate of matching, Shutters to be fixed to a frame. Rigidly fixed on

both sides and top finshed in laminate. No internal carcass required. All

MR Hinges of hettich or equivalent. Internal Surface of the shutter in sq m 10 11,500.00 115000

balancing white laminate. All shutters to be provided with Stainless steel

louvers at the top and bottom of the shutter as per the site

requirements and instrcution of the Engineer In charge.

Providing and Fixing Logo & Signage in 3D ,as per the approved Design/

MR pattern with Mat /Gloss Finish Brass Letters with Mettalic/ Acrylic Base, sq inch 3400 18 61200

complete as required at site with the direction of the Enginner In Charge

Providing & fixing Sidbi Sign Glow Board For Exterior Acrylic Base

Embeded Letter as per design

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling

height consisting of G.I. frame and required board, including

providing and fixing of frame work made of special section power

pressed/ roll form G.I. sheet with zinc coating of 120

gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick,

fixed to the floor and ceiling at the spacing of 610 mm centre to

centre with dash fastener of 12.5 mm dia meter 50 mm length or

suitable anchor fastener or metal screws with nylon plugs and the

studs 48 mm wide having one flange of 34 mm and other flange

36 mm and 0.50 mm thick fixed vertically within flanges of floor

and ceiling channel and placed at a spacing of 610 mm centre to

centre by 6 mm dia bolts and nuts, including fixing of studs along both

ends of partition fixed flush to wall with suitable anchor fastener

or metal screws with nylon plugs at spacing of 450 mm centre to

centre, and fixing of boards to both side of frame work by 25

mm long dry wall screws on studs, floor and ceiling channels at the

spacing of 300 mm centre to centre.

Digitally signed by AMIT

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

The boards are to be fixed to the frame work with joints

staggered to avoid through cracks, M.S. fixing channel of 99 mm

width (0.9 mm thick having two flanges of 9.5 mm each) to be

provided at the horizontal joints of two boards, fixed to the studs

using metal to metal flat head screws, including jointing and

finishing to a flush finish with recommended jointing compound,

jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm),

joint finisher and two coats of primer suitable for board as per

manufacture's specification and direction of engineer in charge all

75 mm overall thickness partition with 12.5 mm thick double skin fire

9.105.1 rated Glass Reinforced Gypsum (GRG) sqm 80 2,131.10 170488

plaster board conforming to IS: 2095:

MULTIPLYING FACTOR FOR 18 % GST 0.973 20,95,794.18

Grand Total of Civil Works 21,58,668.00 26,66,893.13

Grand Total of Civil Works 21,58,668.00 26,66,893.13

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR TOTAL TOTAL

E&M DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

2025 DSR (INR) NON-DSR

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable

1.10 in surface / recessed medium class PVC conduit, with modular switch,

A.1 modular plate, suitable GI box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point

(without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper

1.55 conductor single core cable in surface/ recessed PVC conduit, and earthing

A.2 the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core

cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed medium class PVC conduit

alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core

cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular

1.24 plate & switch box including connections but excluding modular plate etc. as

1.24.4 3 pin 5/6 amp socket outlet Each 60 136.00 8160.00

1.24.5 6 pin 15/16 amp socket outlet Each 60 219.00 13140.00

Supplying and fixing modular blanking plate on the existing modular

plate & switch box excluding modular plate as required.

Digitally signed by AMIT

DSR TOTAL TOTAL

E&M DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

2025 DSR (INR) NON-DSR

Supplying and fixing following size/module, GI box along with Modular

base & cover plate on existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following

1.14 sizes of FR PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 750 311.00 233250.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 482.00 24100.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 50 1454.00 72700.00

Supplying and making end termination with brass compression gland and

11.1 aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE

C.1 aluminium conductor cable of 1.1 KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to

I.S.7098/1554Aluminium Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium

C.2 conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 /

IS:1554 part-1 respectively & ISI marked.

(b) 3.5 C x 95 Sqmm XLPE cable RM 30 864.00 25920.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 30 378.00 11340.00

Digitally signed by AMIT

DSR TOTAL TOTAL

E&M DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

2025 DSR (INR) NON-DSR

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE

C.3 MR insulated Copper conductor armoured cable of 1.1 KV grade conforming

to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable RM 50 1446.00 72300.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 35 2253.00 78855.00

Supplying and fixing single pole blanking plate in the existing MCB DB

complete etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in

D.2 the existing MCB DB complete with connections, testing and

commissioning etc. as required.

2.10.1 Single pole Each 32 285.00 9120.00

Supplying and fixing following rating, four pole, 415 volts, isolator in the

2.13 existing MCB DB complete with connections, testing and commissioning etc.

Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,

2.4 complete with tinned copper bus bar, neutral bus bar, earth bar, din

D.4 bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 2 9081.00 18162.00

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper

conductor PE insulated, shielded with fine tinned copper braid and protected

with PVC sheath in the exisitng surface/ recessed steel/ PVC conduit as

Digitally signed by AMIT

DSR TOTAL TOTAL

E&M DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

2025 DSR (INR) NON-DSR

Supplying and fixing of following sizes medium class PVC conduit aong with

1.21 accessories in surface/ recess including cutting the wall and making good the

same incase of recessed conduit as required

Supplying and Installation of following size perforated of painting with

powder coating M.S. cable trays of perforation of not more than 17.5% in

convinient sections, joined with connectors suspended from the cieling with

MS suspenders including bolts and nuts painting suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 15 1243.00 18645.00

Earthing with copper earth plate 600mm X 600mm X 3mm thick including

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/

coke and salt as required.

Providing and fixing 25 mm X 5mm G.I. strip on surface or in recess for

connections etc. as required.

Supply, Installation, Testing and Commissiong of 10 KVA True Online Double

Conversion UPS 3Phase Input - 3Phase Output in IGBT Based Rectifier and IGBT

Based Inverter Batteries:12 V, SMF Amararaja/ Exide with minimum VAH

capacity of 15600 suitable for 30 minutes backup with each ups Along with

Accessories Rack, Interlinks, SFU, Parallel Kit, DC Cable Upto 5 Meters Nos 1 365000.00 365000.00

complete in all respect as per the directions of the engineer in charge. UPS

should have availability of Input /Output isolator, Inbuilt manual bypass along

with phase sequence corrector. UPS Efficiency shall not be less than 94% from

25% to 100% Load

Total of Electrical items 1070036.00 571577.00

Digitally signed by AMIT

VRF/VRV OUTDOOR UNIT

1.0 Description Unit Quantity Rate DSR Amount

Supply, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling/ heating having 100% hermetically

sealed inverter type twin Rotary/Scroll Compressor(s), minimum two compressors (with individual

separate PCB) for above14HP modules, microprocessor based Controller, top discharge type

condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with suitable foundation

etc. complete as required. To have better efficiency condenser fan shall be capable to

operate at different speed with respect to load. The unit shall deliver the rated capacity and

in confirmation as per IS 18728:2024 and CPWD Specifications and work even at 50°C ambient

temperature without tripping. The system shall be able to deliver 100% of the rated capacity

upto 39 Degree Celcius.The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC

power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant

and ready for use as required. The condenser should be coated with a hydrophilic film to prevent

water accumulation on the surface of the heat exchanger, enhance water dispersion, and

reduce the risk of degradation, thereby improving overall performance and durability. The

Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation

and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD

specification, connections, inter connections etc. as required. (For capacity <40 kWr ISEER 7.4,

Capacity > 40 and <70 ISEER 7.5, Capacity > 70 ISEER 7.6 for Super ECSBC Building)

2.0 INDOOR UNIT

Supply, Installation, Testing and Commissioning of following minimum capacity 4 way Cassette

Type Indoor ceiling mounted unit equipped with synthetic washable media pre- filter, fan section

with low noise fan / dynamically balanced blower, multispeed motor, coil section with DX

Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports,

vibration Isolation, Corded remote control etc., suitable for operation on single phase 230 V

± 10%, 50Hz AC supply, complete, as required. The Indoor units must shut down upon receiving

a singal from the BMS System/Fire Signals. The system shall be capable to adjust air flow as per

room requirement in auto mode. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature. (Make will be same as of

Digitally signed by AMIT

1.0 Description Unit Quantity Rate DSR Amount

Supply, Installation, Testing and Commissioning of following minimum capacity High wall type

Indoor unit equipped with and comfort washable synthetic media pre-filter, fan section with

low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories

7.8 etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The

Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall

be capable to adjust air flow as per room requirement automatically. The cooling capacity of

indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

(Make will be same as of Outdoor)

REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete

with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric

nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and

Liquid lines, all accessories as per specifications etc. as required :

3.1 7.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 90.00 256.00 23,040.00

3.2 7.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 75.00 346.00 25,950.00

3.4 7.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 35.00 615.00 21,525.00

3.6 7.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 45.00 904.00 40,680.00

3.10 7.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Rmt 60.00 1,286.00 77,160.00

3.14 7.13.2 Outdoor Multi Units Each 1 8098 8,098.00

Supplying and installaton following size of perforated painted with powder coating M.S. cable trays

with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from

the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts,

painting suspenders, fastener etc as required.

4.1.3 200 mm width X 50 mm depth X 1.6 mm thickness Rmt 10.00 775.00 7,750.00

4.1.10 450 mm width x 62.5 mm depth x 2 mm thickness Rmt 5.00 1,348.00 6,740.00

5 CONDENSATE DRAIN UPVC PIPE

Digitally signed by AMIT

1.0 Description Unit Quantity Rate DSR Amount

Supply, installation, testing and commissioning of uPVC Pipe, complete with fittings, supports,U trap

arrangement,Clean Plug with 6mm nitrile insulation and accessories as per specifications, drawings.

Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm copper in suitable

conduits between indoor and outdoor unit.

6 MR Supply & Fixing IP55 Base Outdoor MCB Box with in 1 Nos 65 amp RCCB Nos 1 14650 14,650.00

7 MR Supply and Fixing MS Base Frame for VRV Outdoor Stand as per requirement of Size L.S 1 20500 20500

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - DATA and VOICE WORKS

S NO Description UOM Qty Rate DSR Amount NDSR Amount

A. UTP Components for Data

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of Hub room

to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Rack Side. Keystone

Unshielded Outlet, 180DG C6, Blue

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Rack Side end

Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information outlet (I/O)

8 MR to end user Redantant device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, Nos. 35 420.00 14700

C6, 2M (Yellow)

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information outlet (I/O)

9 MR to Rack End Redantant device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, Nos. 35 420.00 14700

C6, 2M (Yellow)

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred Jack Panel for CAT6

cable termination at rack end. Data Active Redandant

12 MR SITC of 04 core OM3 Multimode fiber orange color 50/125, minimum bending radius 15x OD RM 50 229.17 11458.33

13 MR SITC of 24U Rack Each 1 34,500.00 34500

Supply instllation testing and commissioning of Access Switch of 24 x 1G POE+, 4 x SFP+ , 370W PoE, Switching Capacity of

14 MR switch is of 176 Gbps having Forwarding performance (64-byte packet size): 130 Mpps, Secure Shell (SSH), as per approved Nos. 1 165500 165500

B 200 Pair MDF Box

1 MR 200 Pair MDF Box with mounting Frame Nos. 1 11666.00 11666

2 MR 10 Pair Krone Module Nos. 5 900.00 4500

3 MR 25 Pair Riser Cable Mtr. 15 750.00 11250

GRAND TOTAL (A+B) 0.00 471414.33

GRAND TOTAL (A+B) 0.00 471414.33

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S TOTAL TOTAL

2025/ DESCRIPTION UNIT QTY RATE

No AMOUNT AMOUNT

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS

1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

27.7 gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint of required shade complete as

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers

2 of rating 68 degree centigrade with required accessories :

27.21.1 Pendant type Each 60 599.00 35940.00

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of

stainless steel complete with 15 NPT on reducer thread with maximum working pressure

27.25 of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male

3 thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2

side brackets, center bracket, stockbar of following sizes complete as required.

Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all

accessories as permanufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). NOS 3 12070.00 36210.00

b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). NOS 3 2740.00 8220.00

c) ABC dry powder stored pressure type 6 kg capacity (IS:15683). NOS 3 4437 13311.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CCTV

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

Supply, Installation, Testing & Commissioning of 4MP IR IP H.265

Vandal Proof Dome camera with 2.8 to 12mm Motorised

Lens,Smart IR, up to 30M IR distance,Up to 120 dB WDR (Wide

Dynamic Range),3D DNR (Digital Noise Reduction),H.265+, H.265,

1 MR H.264, MJPEG,Corridor mode, Triple streams,3-Axis, IP67, IK10 Nos 16 4650.00 74400.00

Vandal Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0 Lux with

IR,Video Compression H.265+, H.265, H.264, MJPEG,Behavior

Detection Intrusion,

Supply, installation testing and commissioning of Network Video

recorder Linux based to manage and control all the cameras from

control room. Software shall support maximum 16 channel with joystick

2 MR controller. 256Mbps Bit Rate Input Max(up to 32-ch IP video), 2 SATA Nos 1 34500.00 34500.00

Interfaces, alarm I/O: 16/4, 1.5U case,19" with 1x4TB i.e. 4TB HDD inside

Supply Installation Testing & Commissioning of 32 inch Full HD LED

3 MR monitor including wall mount brackets/ clamps/ desk mounting stand. Nos. 1 24500.00 24500.00

4 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 2 3500.00 7000.00

Total : A - CCTV 140400.00

Digitally signed by AMIT

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made

out of 25mm thick pre -laminated particle board of approved shade. The working and non working

edges shall be finished with machine pressed with 2mm PVC egdge banding. The table top shall be

supported with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x

40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc

edge banding. The table shall be provisioned with Side unit of overall size: 1800mm(L) x 450mm(D) x

675mm(H) . Side storage having a provision for three equal drawer unit and two openable shutter &

one open storage with shelf in it. The Side unit top shall be made out of 18mm thick pre laminated

1 Brach Incharge particle board and rest all storage to be made out of 18mm thick pre laminated particle board. Nos. 1.00 44,600 44,600.00

Provision of Junction box, wire raceway and 6 module fliptop box for wire passing or as per site

requirement.Main Table Dimension (L)2250mm X (D) 875mm X (H)750mm overall Side Runer Dimension

(L)900mm X (D) 400mm X (H) 675mm & Back Storage 2900X400X675 mm

Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size :-

(W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design contour

lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered

with leatheritte and cut foam. The chrome plated loop armrest with padded upholstery is provided for

BO High Back extra comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke

Chair of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30- 35 (+/

2kg /m3) Dimensions The backrest has a foam of 28kg/m3.

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X

(H)990mm.A contemporary design with an all black finish, . Material & subtype:Premium Leatherette,

Colour & Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever,

BO Visitor Back Base:Cantilever Frame, Base Type: Cantilever, Maximum Seating Height:19".The Seat & back are made

3 up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has Nos. 3.00 8,500 25,500.00

foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3.

Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the soft

cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour & Colour Family:as

per requirement, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern,

Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The seat

cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75

4 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The Nos. 1.00 25,500 25,500.00

backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2 seater

Dimension(L)1390mm X (D)750mm X (H)710mm

Digitally signed by AMIT

Sno. Item Specifications Unit Qty Rate Amount

BO Cabin Side Supplying, and placing in position of Cofee/ Corner Table as per approved design

5 Dimension(L)450mm X (D)450mm X (H)450mm Nos. 2.00 8,000 16,000.00

Supplying and placing in position of main table as per photograph/drawing .The table shall be made

out of 25mm thick pre -laminated particle board of approved shade. The working and non working

edges shall be finished with machine pressed with 2mm PVC egdge banding. The table top shall be

supported with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x

40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc

edge banding. The table shall be provisioned with Side unit of overall size: 1500mm(L) x 450mm(D) x

675mm(H) . Side storage having a provision for three equal drawer unit and two openable shutter &

one open storage with shelf in it. The Side unit top shall be made out of 18mm thick pre laminated

particle board and rest all storage to be made out of 18mm thick pre laminated particle board.

Provision of Junction box, wire raceway and 6 module fliptop box for wire passing or as per site

requirement. Main Table Dimension (L)1500mm X (D) 675mm X (H)750mm overall Side Runer Dimension

(L)1900mm X (D) 450mm X (H) 675mm & Back Storage 2100X400X750 mm

Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x

490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood

and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303)

upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self

tension single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/-

AGM High 0.3 cm .The black .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall

Chair be operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The

backrest has a foam of 28kg/m3. adjustable arm rest and head rest

Supplying and placing in position of 360 degrees revolving back chair of size: 660mm (L) x 490mm(D) x

1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded

foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered

with Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension single

locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The

AGM Back black .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be

Chair operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The

backrest has a foam of 28kg/m3. adjustable arm rest and head rest

Digitally signed by AMIT

Sno. Item Specifications Unit Qty Rate Amount

Dimesnion: 1500mm(L) x 1500mm(L) x 600mm(D) x 1200mm(H) Modular Workstation With Side Top

with 3 drawer Pedestal Size 1500W x 600D x 750/1200H.Partition NI-60mm Partition Ht. 1200mm,

Double Raceway systems Skirting label and below the table top . lower tile both side laminated and

upper tile inside side fabric, White Board and white Tinted Glass. With Side Top Size 900W x 400D x 750H

25mm thick Gabel end 18mm thick MDF board., and 3Drawer top supported Pedestal unit Size

9 400W x 400D x 725H made in 18mm thick..Complete Made in MDF Board.. Laminate 1- Frosty White, Nos. 9.00 31,500 2,83,500.00

Laminate2 For drawer Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating- Munshel

Gray. and White Tinted Glass

Dimension: 1200mm(L) X 600mm(D) x 1050mm(H) Supplying, and placing in position of linear

workstation as per Image.The worktop made out of 25mm thk. Prelam Particle board with 2 mm thk

PVC edge banding.The Table top supported on Mild Steel of size 50mm x50mm Slanted Leg and 50mm

x 25mm Horizontal connectors with Powder coting of 50 Micron. Middle Leg :- 0.8 mm thk Metal panel

fixed on both side of the "T" leg for Vertical wire carrying purpose.(Sharing Workstation). 0.8 mm thk

Single/Double metal powder coated raceway with Powder coting of 50 Micron below top for

wiring.Vertical wire carrying pole with powder coating 50 micron below top for wiring( Non- sharing

workstation ). Also having a provision of ms perfoated sheet hanging modesty. provision of glass divider

Linear rest on the "D" brackets on the table top between opposite seatings. All working or non working edges

Workstation shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot

temperature. Provision of pullout PVC keyboard tray and CPU trolley for each seating. Also a provision

of Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a combination of2 drawer & one filing

drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with

provision of handles & Locking arrangement

Supplying and placing in position of conference table 6 Pax of required size as per image/drawing.

The work surface top should be of thickness 42mm top prelaminated particle board with 2mm thick

PVC edge banding. The side panel are made up of 36mm thick prelaminated particle & modesty

Conference panel are made out of 25mm thick prelaminated particle board with 2mm thick PVC edge banding.

11 The wire carrier should be made from 0.6mm thick CRCA & powder coated 40-50 microns. Also having Nos. 1.00 40,500 40,500.00

a provision of 6 module flip top box & metal raceway for wire flow.

Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x

490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood

and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303)

upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self

tension single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/-

Confrence high 0.3 cm .The black .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall

back Chair be operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The

backrest has a foam of 28kg/m3. adjustable arm rest and head rest

Digitally signed by AMIT

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair of Size

:-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour

lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered

Medium Back with leatheritte and cut foam. The chair shall be provided with pneumatic height adjustment which

chair shall have stroke of 10.0 +/-

Workstation/ 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/- 2kg /m3)

Reception The backrest has a foam of 28kg/m3.

Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the soft

cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour & Colour Family:as

per requirement, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern,

Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The seat

cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75

14 3 seater sofa inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The Nos. 2.00 36,000 72000

backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2 seater

Dimension(L)1800mm X (D)750mm X (H)710mm

Providing & Installation of Reception table of size 1.2m x 0.75m x .9 m (ht) made out of 19mm thk.

Commercial Board finished in Recon veneer and DU Pont Coreanof approved shade as per design.

Reception The Recon surfaces to be white Duco painted. A glass top od width 0.2m on SS pegs to be provided

Table above table. One (1) number Drawer pedestal with 3 drawers to be provided under the table.

Reception Supplying, and placing in position of Corner Table as per approved design Dimension(L) 450mm X

Reception Supplying, and placing in position of Coffee Table as per approved design Dimension(L) 1050mm X

Supplying and placing in position of conference table 25 Pax of required size as per image/drawing.

The work surface top should be of thickness 42mm on 4 mm Venner Table with malamine polished top

The side panel are made up of 36mm thick veneer polish & modesty panel are made out of 25mm

Conference thick veneer polish. The wire carrier should be made from 0.6mm thick CRCA & powder coated 40-50

Table microns. Also having a provision of 6 module flip top box & metal raceway for wire flow.The approx

Sixe 8500X1500X750 mm

Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x

490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood

and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303)

upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self

tension single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/-

Confrence high 0.3 cm .The black .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall

back Chair be operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The

backrest has a foam of 28kg/m3. adjustable arm rest and head rest

Digitally signed by AMIT

Sno. Item Specifications Unit Qty Rate Amount

REGIONAL OFFICE

Dimesnion: 1500mm(L) x 1500mm(L) x 600mm(D) x 1200mm(H) Modular Workstation With Side Top

with 3 drawer Pedestal Size 1500W x 600D x 750/1200H.Partition NI-60mm Partition Ht. 1200mm,

Double Raceway systems Skirting label and below the table top . lower tile both side laminated and

upper tile inside side fabric, White Board and white Tinted Glass . With Side Top Size 900W x 400D x

750H 25mm thick Gabel end 18mm thick MDF board., and 3Drawer top supported Pedestal unit

Size 400W x 400D x 725H made in 18mm thick..Complete Made in MDF Board.. Laminate 1- Frosty Nos. 4.00 31,500 1,26,000.00

White, Laminate2 For drawer Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating-

Munshel Gray. and White Tinted Glass

Dimension: 1200mm(L) X 600mm(D) x 1050mm(H) Supplying, and placing in position of linear

workstation as per Image.The worktop made out of 25mm thk. Prelam Particle board with 2 mm thk

PVC edge banding.The Table top supported on Mild Steel of size 50mm x50mm Slanted Leg and 50mm

x 25mm Horizontal connectors with Powder coting of 50 Micron.Middle Leg :- 0.8 mm thk Metal panel

fixed on both side of the "T" leg for Vertical wire carrying purpose.(Sharing Workstation). 0.8 mm thk

Single/Double metal powder coated raceway with Powder coting of 50 Micron below top for

wiring.Vertical wire carrying pole with powder coating 50 micron below top for wiring( Non- sharing

workstation ). Also having a provision of ms perfoated sheet hanging modesty. provision of glass divider

rest on the "D" brackets on the table top between opposite seatings. All working or non working edges

Linear shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot

temperature. Provision of pullout PVC keyboard tray and CPU trolley for each seating. Also a provision Nos. 2.00 26,500 53,000.00

of Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a combination of 2 drawer & one filing

drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with

provision of handles & Locking arrangement

Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair of Size

:-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour

lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered

Medium Back with leatheritte and cut foam. The chair shall be provided with pneumatic height adjustment which

chair shall have stroke of 10.0 +/- Nos. 6.00 8,500 51,000.00

Workstation 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/- 2kg /m3)

The backrest has a foam of 28kg/m3.

Digitally signed by AMIT

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made

out of 25mm thick pre -laminated particle board of approved shade. The working and non working

edges shall be finished with machine pressed with 2mm PVC egdge banding. The table top shall be

supported with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x

40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc

edge banding. The table shall be provisioned with Side unit of overall size: 1500mm(L) x 450mm(D) x

675mm(H) . Side storage having a provision for three equal drawer unit and two openable shutter &

one open storage with shelf in it. The Side unit top shall be made out of 18mm thick pre laminated

particle board and rest all storage to be made out of 18mm thick pre laminated particle board.

Provision of Junction box, wire raceway and 6 module fliptop box for wire passing or as per site

requirement. Main Table Dimension (L)1500mm X (D) 675mm X (H)750mm overall Side Runer Dimension

(L)1900mm X (D) 450mm X (H) 675mm & Back Storage 2100X400X750 mm

Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x

490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood

and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303)

upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self

tension single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/-

AGM High 0.3 cm .The black .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall Nos. 2.00 10,500 21,000.00

Chair be operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The

backrest has a foam of 28kg/m3. adjustable arm rest and head rest

Supplying and placing in position of 360 degrees revolving back chair of size: 660mm (L) x 490mm(D) x

1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded

foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered

with Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension single

locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The

AGM Back black .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be

Chair operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The

backrest has a foam of 28kg/m3. adjustable arm rest and head rest

Digitally signed by AMIT

Sno. Item Specifications Unit Qty Rate Amount

Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the soft

cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour & Colour Family:as

per requirement, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern,

Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The seat

2 seater sofa cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The Nos. 1.00 25,500 25,500.00

backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2 seater

Dimension(L)1390mm X (D)750mm X (H)710mm

Supplying and placing in position of main table as per photograph/drawing .The table shall be made

out of 25mm thick pre -laminated particle board of approved shade. The working and non working

edges shall be finished with machine pressed with 2mm PVC egdge banding. The table top shall be

supported with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x

40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc

edge banding. The table shall be provisioned with Side unit of overall size: 1800mm(L) x 450mm(D) x

675mm(H) . Side storage having a provision for three equal drawer unit and two openable shutter &

Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size :-

(W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design contour

lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered

with leatheritte and cut foam. The chrome plated loop armrest with padded upholstery is provided for

DGM High extra comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke

Back Chair of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30- 35 (+/

2kg /m3) Dimensions The backrest has a foam of 28kg/m3.

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X

(H)990mm.A contemporary design with an all black finish, . Material & subtype:Premium Leatherette,

Colour & Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever,

DGM Visitor Base:Cantilever Frame, Base Type: Cantilever, Maximum Seating Height:19".The Seat & back are made

8 up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has Nos. 2.00 8500.00 17,000.00

foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3.

Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the soft

cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour & Colour Family:as

per requirement, Seating Height:16.14",Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern,

Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The seat

cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The

backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2 seater

Dimension(L)1390mm X (D)750mm X (H)710mm

Digitally signed by AMIT

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made

out of 25mm thick pre -laminated particle board of approved shade. The working and non working

edges shall be finished with machine pressed with 2mm PVC egdge banding. The table top shall be

supported with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x

40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc

edge banding. The table shall be provisioned with Side unit of overall size: 1800mm(L) x 450mm(D) x

675mm(H) . Side storage having a provision for three equal drawer unit and two openable shutter &

one open storage with shelf in it. The Side unit top shall be made out of 18mm thick pre laminated

particle board and rest all storage to be made out of 18mm thick pre laminated particle board.

GM Incharge Nos. 1.00 52,000 52,000.00

Provision of Junction box, wire raceway and 6 module fliptop box for wire passing or as per site

requirement.Main Table Dimension (L)2250mm X (D) 875mm X (H)750mm overall Side Runer Dimension

(L)900mm X (D) 400mm X (H) 675mm & Back Storage 2900X400X675 mm

Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size :-

(W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design contour

lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered

with leatheritte and cut foam. The chrome plated loop armrest with padded upholstery is provided for

GM High Back extra comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke

Chair of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30- 35 (+/

2kg /m3) Dimensions The backrest has a foam of 28kg/m3.

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X

(H)990mm.A contemporary design with an all black finish, . Material & subtype:Premium Leatherette,

Colour & Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever,

GMVisitor Back Base:Cantilever Frame, Base Type: Cantilever, Maximum Seating Height:19".The Seat & back are

made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat Nos. 3.00 8,500 25,500.00

has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3.

Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the soft

cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour & Colour Family:as

per requirement, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern,

Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The seat

cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The Nos. 1.00 36,000 36,000.00

backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2 seater

Dimension(L)1390mm X (D)750mm X (H)710mm

GM Cabin Side Supplying, and placing in position of Cofee/ Corner Table as per approved design

Dimension(L)450mm X (D)450mm X (H)450mm Nos. 1.00 8,000 8,000.00

Digitally signed by AMIT

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made

out of 25mm thick pre -laminated particle board of approved shade. The working and non working

edges shall be finished with machine pressed with 2mm PVC egdge banding. The table top shall be

supported with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x

40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc

edge banding. The table shall be provisioned with Side unit of overall size: 1800mm(L) x 450mm(D) x

675mm(H) . Side storage having a provision for three equal drawer unit and two openable shutter &

one open storage with shelf in it. The Side unit top shall be made out of 18mm thick pre laminated

particle board and rest all storage to be made out of 18mm thick pre laminated particle board.

Provision of Junction box, wire raceway and 6 module fliptop box for wire passing or as per site

requirement. Main Table Dimension (L)1500mm X (D) 600mm X (H)750mm overall Side Runer Dimension

(L)900mm X (D) 450mm X (H) 675mm With back Storage 2100X400X650 mm

Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x

490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood

and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303)

upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self

tension single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/-

0.3 cm .The black .The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall

be operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The

backrest has a foam of 28kg/m3. adjustable arm rest and head rest

Providing & Installation of Pantry table of size 1.8m x 0.75m x 1.05m (ht) made out of 19mm thk.

Commercial Board finished in Recon veneer and DU Pont Coreanof approved shade as per design.

The Recon surfaces to be white Duco painted. A glass top od width 0.2m on SS pegs to be provided

above table. One (1) number Drawer pedestal with 3 drawers to be provided under the table.

Providing & Installation of Pantry chairs of required dimension and as per instruction of EIC

21 Pantry chairs Nos. 12.00 4,500 54,000.00

The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back panel is

made of 09mm thick MDF of approved shade. All the edges of storage surface shall be provided with

Openable machine pressed imported PVC lipping glued with hot melt EVA glue free from any VOC with free

Shutter storage groove handle and suitable lock. All exposed area PVC edge lipping

Total Amount 27,59,360.00

Total Amount 27,59,360.00

Digitally signed by AMIT

FIRE ALARM WORKS

DSR- DESCRIPTION NDSR DSR

S.NO. UNIT Qty RATE

2025 Amount AMOUNT

28.2 INTELLIGENT FIRE ALARM SYSTEM

Supplying, installation, testing and commissioning of micro processor

based intelligent addressable main fire alarm panel, central processing

unit with the following loop modules and capable of supporting not less

than 240 devices (including detectors) and minimum 120 detectors per

loop and loop length up to 2 km, network communication card, minimum

320 character graphics/ LCD display with touch screen or other keypad

and minimum 4000 events history log in the non volatile memory (EPROM),

a) 28.2.1 power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed

maintenance free batteries with automatic charger. The panel shall have

facility to connect printer to printout log and facility to have seamless

integration with analog/digital voice evacuation system (which is part of

the schedule of work under SH: PA System) and shall be complete with all

accessories . The panel shall be compatible for IBMS system with open

protocol BACnet/ Modbus over IP complete as per specifications.

Supplying, installation, testing & commissioning of intelligent analog

c) 28.2.4 addressable photothermal detector complete with mounting base No. 40.00 3004.00 120160.00

complete as required.

Supplying, installation, testing & commissioning of response indicator on

d) 28.2.5 surface/recessed MS Box having two LED, metallic cover complete with No. 18.00 306.00 5508.00

all connections etc as required.

Supplying, installation, testing & commissioning of fault isolator complete

with base as required.

Supplying, installation, testing & commissioning of addressable fire control

module complete as required.

Supplying, installation, testing & commissioning of addressable manual

call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum

strobe complete as required.

28.5 CABLING & WIRING

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,

600/1000V rated with annealed copper conductor having XLPE

a) 28.5.2 insulation, steel wire armouring & FRLS/HFFR outer sheath complete Metre 450.00 192.00 86400.00

Digitally signed by AMIT

S.No. Description Unit Qty. Rate Amount

LED Down lighter (COB Type) (System lumen efficacy ≥ 105 < 120lm/Watt) Supplying of LED Recessed/ surface

Down lighter (Round/ square/ Rectangular) COB Type of following body material and construction as per IS :

10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,

frequency 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5

KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19,

Flicker free (flicker should be below 5%), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning

Hours with 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K (As

per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more

than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate

(T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect

i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as

required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 &

LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape

size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink

of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast

/Extruded aluminium Body including trim with Aluminium Reflector 12 -15 watt

LED Panel light 2x2 ft., (System lumen efficacy >135 lm/Watt) Supplying of Panel light 2x2 ft., of following body

material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%,

Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade,

internal surge protection of 2.5 KV with Short & Open circuit protection,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR

(Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary),

of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K /

5700°K /6000°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power

4258 consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade Nos 40 2700.00 108000

mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.

complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core

cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt

output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be

submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal

management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

Powder coated die cast /Extruded aluminium Body (Thickness >1.20 mm) 36 watt

Total of Electrical items 147620.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: SIGNAGE

S No NDSR Description Unit Qty Unit price

Providing and Fixing Logo & Signage in 3D ,as per the approved Design/ pattern with Mat

MR /Gloss Finish Brass Letters with Mettalic/ Acrylic Base, complete as required at site with the sft 75 1360 102000

direction of the Enginner In Charge

Digitally signed by AMIT