| 1 | Basic requirement of the software | COMSOL software at a minimum should include basic Geometry creation, structural linear models with a user defined physical problem with a given system of PDEs (Partial deferential equation) in a software environment. It should couple two or multi-physical problem in the supplied software engine. The software should able to generate mesh in the developed model including but not limited to 2D and 3D Meshes with specific mesh refinements at the area of Interest. Software should be able to generate both structured, unstructured and hybrid meshes. User should be able to apply point, line, surface, or volumetric types of boundary conditions in the generated meshes. | 1 | number | Veena Maiya 560064,JAKKUR ,BANGALORE | 30 |
| 2 | | COMSOL software should allow for simulating the propagation of sound in fluids and in solids. Software should model classical problems such as scattering, diffraction, emission, radiation, and transmission of sound. Dedicated modeling tools for thermoacoustic enable highly accurate simulation of miniaturized speakers and microphones in handheld devices. | 1 | number | Veena Maiya 560064,JAKKUR ,BANGALORE | 30 |
| 3 | Composite Materials Simulation | COMSOL software should support the analysis of layered composite structure. Some of the common examples of layered composite materials are fiber-reinforced plastic, laminated plates, and sandwich panels. It should allow users to use layer wise theory and equivalent single layer theory approaches for simulation | 1 | number | Veena Maiya 560064,JAKKUR ,BANGALORE | 30 |
| 4 | | COMSOL software should allow users to perform virtual fatigue analysis. Users should be able to evaluate the user can evaluate the high-cycle and low-cycle fatigue regime with the stress-based and the strain-based critical plane methods. The fatigue load cycle should be simulated in solid bodies, plates, shells, multibody, applications involving thermal stress and deformation, and even on piezoelectric devices. | 1 | number | Veena Maiya 560064,JAKKUR ,BANGALORE | 30 |
| 5 | | COMSOL software should have a material library having material data of the elements, minerals, metal alloys, thermal insulators, semiconductors, and piezoelectric materials. Each material should be represented by referenced property functions, for as many as 24 key properties that are dependent on some variable (typically, temperature). | 1 | number | Veena Maiya 560064,JAKKUR ,BANGALORE | 30 |
| 6 | Multibody Dynamics Simulation | COMSOL software should simulate mixed systems of flexible and rigid bodies, where each body may be subjected to large rotational or translational displacements. Such analyses help identify critical points in the multibody systems, thus enabling the user to perform more detailed component-level structural analyses | 1 | number | Veena Maiya 560064,JAKKUR ,BANGALORE | 30 |
| 7 | Nonlinear Structural Materials Simulation | large strain plastic deformation simulation should be done in the COMSOL software. It should also have elastoplastic, viscoplastic, creep, and hyper elastic material models. | 1 | number | Veena Maiya 560064,JAKKUR ,BANGALORE | 30 |
| 8 | Structural Mechanics Simulation | COMSOL software should allow users to perform wide range of analysis types, including stationary, transient, eigenmode/modal, parametric, quasi-static, frequency-response, buckling, and prestressed | 1 | number | Veena Maiya 560064,JAKKUR ,BANGALORE | 30 |